3D coordinate measuring machine

Mitutoyo QVT1-X302P1L-D

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G551-1586, travel distance X-axis: 800 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 16,000 rpm, position of the milling head: Horizontal, table load: 1,000 kg, overall weight: 22 kg, input voltage: 400 V, Equipment: documentation/manual, GROB G550 / G551 5-axis machining center with TM167 tool magazine and Schuler LoadMaster LMC 900 Price upon request Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end-users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany or the EU • Inclusion of a dual-use statement in the purchase agreement (legally required) Sales/Transfer conditions: • Dismantling, removal, and transport are the responsibility of and at the risk of the buyer. • The buyer is responsible for personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. Technical data Manufacturer: GROB-WERKE GmbH & Co. KG Model: G550 / G551-1586 Machine type: 5-axis universal machining center Year of construction: 2015 Control system: Siemens Sinumerik 840D Axes: 5 Tool holder: HSK-A63 Spindle speed: 16,000 min⁻¹ Spindle power: 35 kW Spindle hours: approx. 19,125 h X-axis: 800 mm Y-axis: 770 mm Z-axis: 500 mm Measuring probe: Renishaw IKZ: 70 bar Tool management GROB TM167 additional tool magazine Pgsdpfxozxf Hks Ai Tou Year of construction: 2021 167 additional tool positions Total number of tool positions: 287 Fully integrated into the system Automation Schuler Automation LoadMaster LMC 900 Year of construction: 2015 Linear pallet changing system 9 pallet positions Beckhoff/TwinCAT control System is fully functional and ready for operation Condition The production cell is in good condition and has been in continuous operation. The machine has a relatively low number of spindle hours and is equipped with a TM167 additional magazine installed in 2021. According to the operator, there are no known defects. The system is ideally suited for the automated production of demanding 5-axis components in the following areas: Mechanical engineering Automotive industry Aerospace Medical technology Tool and mold making Scope of supply GROB G550 / G551 machining center GROB TM167 tool additional magazine Schuler LoadMaster LMC 900 9 pallets Documentation Inspection Inspection possible by appointment. The machine can be inspected while powered on. Location: Germany / Waiblingen If you are interested, we look forward to hearing from you so that we can discuss the further details. Keywords GROB G550, GROB G551, 5-axis machining center, Siemens 840D, TM167, tool magazine, Schuler LoadMaster, LMC900, pallet automation, HSK63, CNC machining center, 5 Axis Machining Center.

Condition: excellent (used), Year of construction: 2003, PET bottle blowing machine Manufacturer: KRONES Model: CONTIFORM K781 Pjdpjvddkvjfx Ai Tegu Efficiency: 12,000 bph Includes 1.5 L and 0.5 L bottle molds Power: 150 kW Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Set dimensions (blow mold + preform feeder): 1100 x 340 cm, h: 450 cm Blow mold dimensions: 500 x 340 cm, h: 250 cm Feeder dimensions: 600 x 250 cm, h: 450 cm Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Year of production: 2003 Technical documentation of machine operation Very good condition

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: SN 10342, GROB G552 – G550 AB Generation 2 (SN 10342) HORIZONTAL 5 AXIS MACHINE - NEW IN OUR SHOWROOM (177 HOURS SPINDLE - ONLY DEMOS WITHOUT ANY MACHINING OR CHIPS MAKING) X-axis travel: 800 mm Y-axis travel: 1020 mm Z-axis travel: 970 mm A-axis travel: -185º/+45º (torque motor) B-axis travel: n x 360º (torque motor) Pjdpfxoz Sdugs Ai Tsgu Table diameter ( T-slots): 770 mm Max workpiece diameter: 900 mm Max workpiece weight.: 800 Kg RAPID traverses X/Y/Z: 65/50/80 m/min AXIS acceleration X/Y/Z: 6/4,5/7,5 m/s2 Total positioning repeatibility < 0,0025 mm MOTORIZED spindle GROB, HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW,oil-air lubrication GROB spindle diagnostics GSD Flushing unit Z-axis Machine cooling system through an air cooled chiller unit (13 Kw) Horizontal disc-type tool magazine HSK-A 63 with 70 tool pockets Max. tool length (automatic change): 465 mm Max. tool length (manual change): 700 mm Work platform at tool magazine Tool cleaning device by compressed air Machine control Heidenhain TNC 640 with GROB4Pilot control panel Electronic handwheel HR 520 (Heidenhain) Grob Kinematic measuring inspection equipment Collision monitoring DCM Collision (HEIDENHAIN) Swivel axis calibration GSC advanced Laser measurement system BLUM LaserControl LC-50 DIGILOG for milling tools Radio touch probe RMP400 with remote RMI-Q Scraper type chips conveyor Cutting fluid filtration system Cutting fluid tank 1.250 L Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose CTS High-pressure cutting fluid unit (10-80 bar, ICS) Flushing unit for the base of the work area Flush and air guns at the work area Oil skimmer for cutting fluid care Machine status lamp (4) in the machine enclosure Total weight 25,7 ton CE Mark

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), overall weight: 25,340 kg, This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for sale.Contact us for more information. Additional information • Screw Diameter: 50 mm • Maximum Dosing Volume: 530 cc • Cycles: 12875090 • Tiebar Spacing: 820 mm Psdpfx Aijx D Nxzs Tjgu • Clamping Force: 3500 kN

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: S2749544010016, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK ONE, rotational speed (max.): 16,000 rpm, number of slots in tool magazine: 167, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - Rotary pallet storage system PSS-R1800 with 10 storage locations - 167 tools in system _____ Basic machine G440 Travels: X=800, Y=800, Z=800 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector: 1,000 m³, filter class ISO ePM1 80% Machine cooling system with air-cooled cooling unit dynamic package Electrical cabinet lighting Machine control system SINUMERIK ONE with machine control GROB⁴Pilot gen. 2 Swivel axis calibration GSC for 4-axis machining centers Program for creation of an automatic clamping sequence Time-controlled start of warm-up program - programmable at the HMI EES function to realize CN program on an external data carrier (SIEMENS) Technology package SINUMERIK MDynamics - milling (SIEMENS) Control panel to enter tool data at tool loading and unloading position Pallet guide element at rotary table Extension of B-axis' radius of action Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication GROB spindle diagnostics GSD Triple disk-type tool magazine HSK-A 63 with 167 (47+10|50|60) tool pockets Pedpfxjwz Eddj Ai Tsgu Tool cleaning device Tool coding, system BIS-M Electromechanical tool breakage detection device Laser measurement system LaserControl NT LC50-DIGILOG for milling tools Setup station door for manual loading and unloading and automatic load and unload systems Rotary pallet storage system PSS-R1800 with 10 storage locations Air gun at setup station Cutting fluid return from pallet storage system PSS to machining center Lighting in the setup station of the PSS pallet storage system Clamping program editor for setup station of PSS-R450-1800 Support EES-call PSS-R450-1800 Support GSC swivel axis calibration PSS-R450-1800 NC program management system by the primary control PSS-R450-1800 Tool requirement planning PSS-R450-1800 5x Pallet 500 x 630 mm, T-slots Pallet equipped with 6 fluid connections High-pressure cutting fluid system (5-40 bar, IKZ) Cooling fluid system Premium - system description Premium flushing package Part clamping system in work area, customer-specific Part clamping system in setup station of pallet storage system PSS, customer-specific Part clamping system in setup station of pallet changer, customer-specific Rotating inspection glass for work area door Infrared probe OMP60 (RENISHAW) Remote machine diagnostics with access control switch 12-month warranty

Condition: good (used), Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 2,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 1,000 mm, workpiece length (max.): 1,380 mm, Charmilles Robofil 690 - Maximum part dimension 1380 x 1000 x 400 - Travels X,Y,Z 800 x 600 x 600 x 400 - Travels U,V ±30 - Maximum demoulding ±15/110 - Global protection by EC-EMC cabinet - Fixed work table - Integrated monobloc flange table - Guaranteed thermal stability; polymer concrete - 5 axes controlled by numerical control (XYUVZ) - Linear glass rulers on all axes - Axis protection by anti-collision system Pjdpfxswz Iuxs Ai Tjgu - Tilting up to ±30°. - ThermoCut (automatic threading and rethreading) - Bonina thread holder 4, 8 and 16Kg - Filtration system: 2 filters (29m2) - Water/water heat exchanger - Automatic regulation of deionization with cylinder - Numerical control CT Millenium (Fanuc) - 12" TFT color graphic touch screen - Hard disk 10GB - Remote control - Machining strategy PROFIL-EXPERT - Integrated CT-EXPERT technology - Automatic adaption of the PILOT-EXPERT generator - Digital generator control - Autorestart - Self-diagnosis - Integrated Ethernet card Additionals: Contact electrode Pinch roller Chiller Spare motor for U/V axis

Condition: excellent (used), Year of construction: 2008, Engel Victory 2050/300 Tech Year of manufacture: 2008 Clamping force: 300 tons Controller: CC200 Screw diameter: 70 mm Operating hours: 65,300 h Pgjdpfxeymr Rgo Ai Teu

Condition: ready for operation (used), Year of construction: 2007, overall weight: 27,000 kg, spindle speed (max.): 6,000 rpm, This 4-axis Okuma MA-600 HB was manufactured in 2007. It features a maximum machining area of 1000 x 900 x 1000 mm, a spindle speed up to 6000 rpm, and a rapid feed rate of 30 m/min. With 150 tool positions and a MAS BT 50 tool holder, it's ideal for complex machining tasks. Consider the opportunity to buy this Okuma MA-600 HB horizontal machining centre. Contact us for more information about this machine. • Axes: 4 • Maximum Machining Area X/Y/Z: 1000 mm x 900 mm x 1000 mm • 4th Axis: 360° x 1° • Rapid Feed Rate: 30 m/min – 12 m/min • 1° B-axis • Drive Power/Max. Torque: 37 kW 10 min, 26 kW continuous load / 606 Nm • Tool Positions: 150 • Tool Holder: MAS BT 50 • ConSep System • Measuring Probe • Tool Breakage Monitoring • Pallet station with 6 pallets, pallet size 630 x 630 mm Pjdpfx Aijzycdcj Tsgu • External cooling/internal cooling 20 bar/internal air Dimensions Machine Depth 10500 mm

Condition: good (used), Year of construction: 2004, operating hours: 69,000 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 70 mm, displacement volume: 1,039 cm³, total length: 7,980 mm, total width: 2,220 mm, total height: 2,570 mm, overall weight: 30,750 kg, Equipment: documentation/manual, ENGEL ES 1800-350 HL CC100 Stock No.: 503394 Manufacturer: ENGEL Type: ES 1800-350 HL Control: CC100 Year of Manufacture: 2004 Operating Hours: 69,000 h Technical Data, Clamping Unit Clamping Force: 3500 kN Platen Size, Height x Width: 1050 x 980 mm Minimum Mold Height: 350 mm Maximum Mold Height: 1300 mm Opening Stroke: 950 mm Ejector Stroke: 250 mm Ejector Force: 83 kN Tool Weight: 2500 kg Technical Data, Injection Unit Screw Diameter: 70 mm Injection Volume: 1039 ccm Injection Pressure: 1441 bar Screw Length: 20 l/d Screw Stroke: 270 mm Screw Speed: 226 rpm Free Injection Rate: 386 g/s Number of Heating Zones: 5 Nozzle Distance: 500 mm Dimensions & Weight Machine Dimensions L x W x H: 7.98 m x 2.22 m x 2.57 m Total Weight: 30,750 kg Equipment Screen Text: German CEE Socket 16A Core Pulling, Hydraulic, 2x Machine including Conveyor Belt Machine including Handling System Machine including Safety Enclosure Machine with Material Hopper Leveling Elements Pgjdpfxoz A U Nts Ai Tju Interface for Color Dosing Unit Interface for Temperature Controller Tool Heating, 24x Technical Data, Handling System Machine Type: Handling System Manufacturer: ENGEL Control: ER-HLI 81 Year of Manufacture: 2004

Condition: excellent (used), Year of construction: 2014, WOOJIN DL650S Injection Molding Machine Year of manufacture: 2014 INJECTION UNIT • Screw diameter: 90 mm • Injection pressure: 1848.5 bar • Injection volume: 3140 cm³ • Injection weight (PS): 2894 g • Injection speed: 801 cm³/sec • Screw stroke: 495 mm • Plasticization capacity: 394 kg/hour • Screw speed: 145 rpm CLAMPING UNIT • Clamping force: 650 tons (6374 kN) • Distance between columns (H x V): 1010 x 1010 mm • Platen dimensions (H x V): 1460 x 1460 mm • Mold opening stroke: 700 – 1350 mm • Maximum distance between platens: 1800 mm • Mold height (Min./Max.): 450 / 1100 mm Pjdpfez I Ac Eox Ai Tegu • Ejector force: 19.8 tons (194 kN) • Ejector stroke: 250 mm • Clamping system: Two-platen direct clamping GENERAL DATA • Pump motor power: 91.4 kW (15+16.4+60 kW system) • Heating power: 33.6 kW • Total installed power: 125 kW • Oil tank capacity: 1500 l • Machine weight: 32 tons • Machine dimensions (L x W x H): 8100 x 2600 x 2300 mm