Internal threading machine

CHIRON

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 194-03, travel distance X-axis: 2,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, table width: 450 mm, table length: 2,280 mm, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 400 mm Travel Z-axis: 425 mm Total number of axes: 3 Table length: 2,280 mm Table width: 450 mm Number of T-slots: 3 T-slot spacing: 150 mm T-slot width: 18 mm Spindle speed: 10,500 rpm Number of tools: 20 Tool diameter: 65 mm Diameter with free adjacent slots: 180 mm Max. tool length: 220 mm Max. tool weight: 8 kg MACHINE DETAILS Control: SIEMENS SINUMERIK 810 M Connection: 50 Hz 3x 400 Volt Spindle motor: 18 kW Total power requirement: 31 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 3,010 x 3,040 mm Machine weight approx.: 7,200 kg EQUIPMENT Coolant system Kjdpfx Aoyhnfcobzewu Chip conveyor Electronic handwheel

Condition: used, Year of construction: 1989, operating hours: 12,142 h, functionality: limited functionality, Equipment: chip conveyor, documentation/manual, For sale: 1989 Chiron FZ22 W machining center with dual pallet system. The machine operates accurately. Occasionally, there is a tool change error— the tool is not properly positioned into the spindle. Compatible with SK40 tool holder. Fitted with Sinumerik 810 control. Comes with chip conveyor and Knoll AE 1058.009 water treatment system; all machine manuals are included. Can be demonstrated under power upon request, currently not in production. Loading assistance is not available. Kwodpoymbdiofx Abzeu

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Kwsdpfx Aequhbgjbzou Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: used, Year of construction: 2014, operating hours: 73,912 h, functionality: fully functional, machine/vehicle number: 173-95, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, torque: 90 Nm, controller manufacturer: Siemens, spindle speed (max.): 10,500 rpm, coolant supply: 30 bar, number of spindles: 3, number of slots in tool magazine: 20, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is fully functional and can be inspected on site. Maintenance has been carried out exclusively by Chiron. Weight: 8,000 kg. CE certificate. Price: 20,000 euros in EXW condition. Kedoylw E Hjpfx Abzjwu

Condition: good (used), Year of construction: 2007, 5-axis CNC machining center Chiron Mill 800 Year: 2007 Control: Fanuc 18i MB5 Travel paths: X 800 / Y 500 / Z 550 mm Main spindle: HSK-A63 Main spindle speed: 20,000 rpm Turning spindle: Collet chuck Hainbuch SK65 BZI Speed: 4,000 rpm Bar capacity: approx. 65 mm Drive power: min. 30 KVA / max. 50 KVA + Tool measurement system Blum Laser Controll NT + Additional magazine (92 tool stations) + Coolant system / paper band filter / ICT (internal coolant supply) + Spindle cooler + Bar feeder Breuning RBK 10012 Kedpfxeylnbxj Abzswu + Inserts 20/25/30/35/40/45/50 Max. diameter: 60 mm Without oil mist extractor! Without CO2 extinguishing system! The machine will be dismantled at the end of March 2026 Installation of transport locks, data backup, dismantling by Chiron company.

Condition: ready for operation (used), Year of construction: 2021, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 4, This 4-axis CHIRON DZ 18 W vertical machining center was manufactured in 2021. Consider the opportunity to buy this CHIRON DZ 18 W vertical machining center. Contact us for more information. Machine Benefits Technical Machine Benefits • Travel speed (x-y-z): 75 m/min • Spindle distance 400 mm Extra Information NC rotary table, type ATU 200, installed in the IWW/ Rotary feedthrough for IWW/ Axes on the work area/ Double-spindle headstock/ HS drive 2 x 25.3 kW - 15%, 12,000 rpm - 140 Nm/ Kwjdpfsx D Nmxex Abzsu Tool changer 2 x 35 tool positions, HSK-A 63, 8 kg/ VS drive X-Y-Z 75-75-75 m/min/ Automatic central grease lubrication/ Sinumerik 840D solution line, 10.4" color screen/ Control system/ Control interface/ RemoteLine SIE/MTX/ Maintenance management on screen/ for machining tilted surfaces, SIEMENS/ Operating hour and workpiece counter on screen/ Control cabinet cooler as door-mounted unit/ Signal light for 3 signals/ Fluid tower in open design/ Oil-free maintenance unit/ Cooling unit/ A u t t t e l l e l e m e n t e/ Chip conveyor scraper belt 1050 mm, rear/08, left/15, 18, 200 l/ Coolant system KF400-FKA900/900 l, 70 bar/ Bridge for cables and hoses/ Machine preparation for internal flushing/ Flushing of fixtures in the machining station/ 1 flushing gun outside the splash guard/ Work area flushing/ Additional equipment for extraction/extinguishing -/ Additional equipment for pneumatics/hydraulics -/ 1860 workpiece support control, coarse/ Hydraulic connection for 200 bar, single-acting/ Hydraulic connection for 200 bar, double-acting/ Regulated, lubricated air purge connection/ Hydraulic unit extension/ Additional equipment for measuring/tool breakage detection -/ RLP40Q measuring probe/ Whisker switch for tool breakage detection/ Additional equipment for machine operation -/ Automatic loading door Open/Close/ Walk Switch/ Additional Equipment: NC Control -/ M Function Package/ Variable Clamping Logic - Siemens/ Powersave/ Siemens Tool Management/ Comfort Cycle Fixture Flushing/ Revolutional Feed/ Loader Interface with Profinet/ Direct Door Detection in 'Open' Position/ Commissioning and Training/ Power Supply / Compressed Air 6 bar / Ambient Temperature 15°-40° C

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: 281-06, Technical Specifications: # Machining Workspace: X 550 mm; Y 400 mm; Z 360 mm # Axis Description: 3 linear axes (X, Y, Z) + 1 rotary axis (rotary table A) and 2 rotary axes (B, indexer head) with direct angular measuring system, maximum 50 rpm, accuracy +/- 5 seconds # A axis swivel: +/-110˚ # Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg # Rapid traverse rate: X/Y/Z 40/40/40 m/min # Distance between divider heads B1/B2: 250 mm # Spindle speed: 1–10,000 rpm # Spindle taper: DIN69893-HSK-A63 (with internal coolant) # Automatic tool changer: 1x48 tools / chip-to-chip time approx. 2.5 sec # Max tool diameter: Ø82 mm / max. length 250 mm / 5 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 45 kVA / 80A Dimensions: # Installation area: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment includes: # CNC control: Siemens 840D Powerline Kodpsxxivcjfx Abzjwu # Chip conveyor: Spring Knoll # Oil cooling system # High-pressure oil filtration system, max. 80 bar: Knoll HL 450/1200 # Shaft, guideways, and electrical cabinet cooling system # 2 oil lubrication systems # Oil mist extraction/recovery: LTA AC3002 # Fire protection: Kraft & Bauer # Presence detection: with low pressure air sensors (part present) # In-process control: Marposs T25 # Tool breakage monitoring: Blum Novotech # Tool presence detection system in spindle # Documentation: incomplete Machine condition: NOT OPERATIONAL # Cover for tool magazine # Tool magazine presence sensor (BERU)

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 191-89, Technical characteristics: - Machining workspace: X 550 mm; Y 400 mm; Z 360 mm - Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary divider head axes B, equipped with direct angular measuring system, max rotation speed 50 rpm, accuracy +/- 5" - Axis A swivel range: +/- 110° - Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg Kwsdpexxi Rmjfx Abzou - Rapid traverse rate: X/Y/Z 40/40/40 m/min - Distance between divider heads B1/B2: 250 mm - Spindle speed: 1–10,000 rpm - Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) - Automatic tool changer: 1x48 positions / chip-to-chip average 2.5 sec - Max. tool diameter: 82 mm / max. tool length: 250 mm / max. tool weight: 5 kg Electrical specifications: - Supply voltage: 3x400V/50Hz - Installed power: approx. 45 kVA / 80A Dimensions: - Installation space: approx. 4.4 x 2.3 x 3.1 m - Weight: approx. 8,500 kg Equipment includes: - CNC control: Siemens 840D Power Line - Chip conveyor: Spring Knoll - Oil cooling system - High-pressure oil filtration system (max. 80 bar): Knoll HL 450/1200 - Shaft cooling system, guideways and control cabinet - 2 oil lubrication units - Oil mist extraction/recovery: LTA - Fire protection: Kraft & Bauer - Part presence P/Y detection: with low-pressure air sensors - In-process inspection: Marposs T25 - Tool holder presence detection in spindle - Documentation: incomplete Machine status: NOT OPERATIONAL: Hydraulic power unit motor burned out.

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 191-88, Technical specifications: # Working area: X 550 mm; Y 400 mm; Z 360 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary axes B with indexing head, direct angular measuring system, max. speed 50 rpm, accuracy +/- 5" # A-axis swivel: +/-110˚ # Max. clamping/part size: Ø247 x 830 mm; max. weight 360 kg # Rapid traverse rate: X/Y/Z 40/40/40 m/min # Distance between dividing heads B1/B2: 250 mm # Spindle speed: 1-10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 1x48 tools, tool-to-tool average 2.5 sec # Max. tool diameter: Ø82 mm / max. tool length: 250 mm / max. tool weight: 5 kg Kodpfjxw Uplox Abzjwu Electrical system: # Voltage: 3x400V/50Hz # Installed power: approx. 45 kVA / 80A Dimensions: # Installation footprint: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment includes: # CNC control: Siemens 840D Power Line # Chip conveyor: Spring Knoll # Oil cooling unit # Oil filtration system up to 80 bar: Knoll HL 450/1200 # Shaft, linear guide and electrical cabinet cooling system # 2 oil lubrication systems # Oil mist extraction/recovery unit: LTA AC3002 # Fire suppression: Kraft & Bauer # Part presence check with low-pressure air sensors # In-process control: Marposs T25 # Tool support monitoring system at spindle # Documentation: incomplete Machine condition: NOT OPERATIONAL # Operator protection screen damaged – operator panel functional # Tool magazine chain # Ballbar X # Ballbar Y # Pullbar spindle # Axis drive power supply X # Axis drive power supply Y # Main drive power supply # Complete hydraulic unit defective

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: 281-09, Technical Characteristics: # Machining Workspace: X 550 mm; Y 400 mm; Z 360 mm # Axis Description: 3 linear axes (X, Y, Z) + rotary table axis A and 2 rotary axes B, equipped with an index divider head with direct angular measuring system, max. rotation speed 50 min⁻¹, accuracy +/- 5" # Axis A swivel: +/-110˚ # Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg # Rapid traverse: X/Y/Z 40/40/40 m/min # Distance between divider heads B1/B2: 250 mm # Spindle speed: 1-10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 1x48 tools / chip-to-chip time approx. 2.5 sec # Max. tool diameter: Ø 82 mm / max. length 250 mm / max. weight 5 kg Electrical Connection: # Voltage: 3x400V/50Hz # Total installed power: approx. 45 kVA / 80A Dimensions: # Installation footprint: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment Includes: Kwodpfx Absxwmvkezju # CNC control: Siemens 840D Power Line # Chip extractor: Spring Knoll # Oil cooling system # High-pressure oil filtration system, up to 80 Bar: Knoll HL 450/1200 # Cooling system for spindle, linear guides, and control cabinet # 2 independent oil lubrication systems # Oil vapor extraction/recovery system: LTA AC3002 # Fire suppression system: Kraft & Bauer # Part presence detection: with low-pressure air sensors # In-process measurement: Marposs T25 # Tool breakage detection: Blum Novotech # Tool holder detection system in spindle # Documentation: incomplete Machine Condition: NOT OPERATIONAL # Hydraulic oil leakage at Peiseler rotary table # New hydraulic pump available in stock