Composite belt - 1 piece

Claas

Condition: used, Year of construction: 2009, 3D sieving box, electric sieve adjustment, Lrsdo Ad H I Dspfx Al Teu NO AutoContour, including Claas C490 cutterbar, year of manufacture 2009, serial number 52700507. including cutterbar carriage, year of manufacture 2009, serial number 71916679.

Condition: used, Year of construction: 2018, Includes GPS receiver with RTK, but without an additional display. Includes tire pressure control system on both axles. Lodpfo Ad H Iwex Al Teru

Condition: used, Year of construction: 2014, including Claas parallel driving system RTK and display. Ljdpj Ad H Dfofx Al Teru

Condition: used, Year of construction: 2018, Model year 201 Lrjdpe Ad Hymofx Al Tou

Condition: used, Year of construction: 2018, CLAAS ROLLANT 454 RC UNIWRAP, baling and wrapping combination, year of manufacture 2018, operating hours: approx. 14,585 bales, bale diameter: 1.25 m, bale width: 1.20 m, bale turning device, load sensing, pick-up 2.10 m with double roller presser, comfortable net wrapping system ROLLATEX, ROTO CUT cutting rotor with 25 knives and group switching, lowerable cutting floor PRO, tires: 620/55R26.5, dual-line pneumatic braking system up to 50 km/h, additional work lights, automatic central lubrication, double wrapping arm, 12 spare rolls, PTO shaft, camera system, CLAAS COMMUNICATOR II operator terminal. Asking price including 19% VAT. Location may change; please inquire about the current location before visiting. Subject to change, errors and prior sale. (Internal: 0139) Lrjdpfxo Ad Elus Al Tsu

Condition: used, Year of construction: 2012, CLAAS DISCO 9100 C AS self-propelled mower-conditioner, year of manufacture 2012, working width: 9.10 m, swath consolidation, tine conditioner, wear plates, hydraulic folding, protective covers on the outside with hydraulic folding, speed sensor for front-mounted mower, warning signs/lighting, PTO shaft, without separate operator terminal, operated via ISOBUS/tractor terminal. Asking price including 19% VAT. Location may change, please inquire about the current location before visiting. Subject to changes, errors and prior sale. (Internal: 1064) Ljdpfx Alo Ad Elhe Tjru

Condition: used, Year of construction: 2016, CLAAS ORBIS 750 AC AUTO CONTOUR 3T, year of manufacture 2016, 10-row, working width: 7.50 m, AUTO PILOT center feeler, 3T transport system, 3-speed manual transmission, PREMIUM LINE crop flow components, suitable for CLAAS JAGUAR 800 / 900. Offer price including 19% VAT. Location may change; please inquire about the current location before visiting. Subject to change, errors and prior sale. (Internal: 1201) Ljdpfx Alo Ad Ekwe Toru

Condition: new, CLAAS AQUA NON STOP COMFORT ANS-C, original packaging and new!, operating manual, original packaging, and a sturdy wooden pallet crate for safe shipping are available. The offer price does not include knife templates; these can be purchased separately as new parts. Product description (source: CLAAS): The AQUA NON STOP COMFORT allows knives from almost all manufacturers to be sharpened. The fully automatic machine is particularly noteworthy for its tool-free conversion with minimal setup time of less than one minute. The knives can be precisely inserted into the designated knife holder. Incorrect insertion of the knives is virtually impossible. The templates enable an exact sharpening of the grinding stone along the knife contour. This ensures that the original contour of the knife is maintained and its service life is extended. Optimal cutting quality is the result. The simple, ergonomically arranged control panel allows important settings to be made intuitively. Here, the machine is switched on and off, and the number of grinding cycles is pre-selected. The grinding pressure can be adjusted to the conditions using a rotary knob and displayed on a manometer. Furthermore, diagnostic functions are also available for the service technician. High-tech: the fully automatic machine is controlled by compressed air. The operation of the lifting table and grinding motor, as well as the removal of the knives, is done pneumatically. Various sensors and pressure switches ensure process control and operator safety. All processes are monitored and can be provided for diagnostic purposes via a sensor query. Fully automatic: the knives are automatically deposited. A safety circuit ensures safe removal of the sharp knives. The knife holder offers space for the entire set of knives. Clean: the grinding debris is collected in a chip drawer. Two baffle stages ensure reliable separation of the chips, so that the ambient air is completely free of grinding dust. The chip drawer can be emptied at any time. Offer price including 19% VAT. The location may change, please inquire about the current location before visiting. Subject to change, errors and prior sale. Lredpfx As Ad Ekqel Teu

Condition: new, CLAAS AQUA NON STOP COMFORT ANS-C, original packaging and brand new!, operating manual, original packaging, and a sturdy wooden pallet box for secure shipping are available. The offered price does not include knife templates; these can be purchased separately as new parts. Product description (source: CLAAS): With the AQUA NON STOP COMFORT, knives from almost all manufacturers can be sharpened. Tool-free conversion with a minimal setup time of less than one minute is a particular feature of this fully automatic machine. The knives can be precisely inserted into the designated knife holder. Incorrect insertion of the knives is virtually impossible. The templates enable an exact sharpening of the grinding wheel along the knife contour. This preserves the original contour of the knife and increases its service life. Optimal cutting quality is the result. Simple, ergonomically arranged control terminals allow important settings to be made intuitively. The machine is switched on and off here, and the number of grinding cycles is preselected. The grinding pressure can be adjusted to the conditions using a rotary knob and displayed on a pressure gauge. Furthermore, diagnostic functions are also available here for the service technician. High-tech: The fully automatic machine is controlled by compressed air. The operation of the lifting table and the grinding motor, as well as the removal of the knives, is done pneumatically. Various sensors and pressure switches ensure process control and operator safety. All processes are monitored and can be provided for diagnostic purposes via a sensor query. Completely automatic: The knives are automatically removed. A safety circuit ensures the safe removal of the sharp knives. The knife storage area offers space for the entire set of knives. Clean: The grinding residue is collected in a chip drawer. Two stepped levels ensure reliable separation of the chips, so that the ambient air is completely free of grinding dust. The chip drawer can be emptied at any time. The offered price includes 19% VAT. The location may change; please inquire about the current location before visiting. Subject to changes, errors, and prior sale. Ljdpfx Als Ad Ekkj Tsru

Condition: new, CLAAS AQUA NON STOP COMFORT ANS-C, original packaging and new!, operating manual, original packaging, and a sturdy wooden pallet crate for safe shipping are available. The offer price does not include knife templates; these can be purchased separately as new parts. Product description (source: CLAAS): The AQUA NON STOP COMFORT allows knives from almost all manufacturers to be sharpened. The fully automatic machine is particularly noteworthy for its tool-free conversion with minimal setup time of less than one minute. The knives can be precisely inserted into the designated knife holder. Incorrect insertion of the knives is virtually impossible. The templates enable an exact sharpening of the grinding stone along the knife contour. This ensures that the original contour of the knife is maintained and its service life is extended. Optimal cutting quality is the result. The simple, ergonomically arranged control panel allows important settings to be made intuitively. Here, the machine is switched on and off, and the number of grinding cycles is pre-selected. The grinding pressure can be adjusted to the conditions using a rotary knob and displayed on a manometer. Furthermore, diagnostic functions are also available for the service technician. High-tech: the fully automatic machine is controlled by compressed air. The operation of the lifting table and grinding motor, as well as the removal of the knives, is done pneumatically. Various sensors and pressure switches ensure process control and operator safety. All processes are monitored and can be provided for diagnostic purposes via a sensor query. Fully automatic: the knives are automatically deposited. A safety circuit ensures safe removal of the sharp knives. The knife holder offers space for the entire set of knives. Clean: the grinding debris is collected in a chip drawer. Two baffle stages ensure reliable separation of the chips, so that the ambient air is completely free of grinding dust. The chip drawer can be emptied at any time. Offer price including 19% VAT. The location may change, please inquire about the current location before visiting. Subject to change, errors and prior sale. Lredpfxe Ad Ei Tj Al Tsu