CLAAS Volto 1300 TS

CLAAS Volto 1300 TS

Reversible machine with transport chassis
Drawbar can be mounted in various positions for top and bottom hitching
Transport chassis acts as a steering wheel in the working position
Working width 13.00 m
Drive: 540 rpm
12 rotors, each with 6 tine carriers
Rotor diameter: 1.50 m
Rotor gearbox hermetically sealed and oil-filled
Main frame made of square tubes offset by 45 degrees

Trailing steering of the transport chassis:
Automatically locked in the pre-turning and transport position
Trailing in the working position, preventing slippage of the main chassis and rotor wheels during tight turns

PERMALINK drive concept:
PERMALINK HD finger coupling
Double joint for folding movements up to 180 degrees for a compact transport position

MAX SPREAD material flow concept:
Tangential tine arrangement angled 29.3 degrees to the rear
Tines work 33% longer in a forward direction compared to conventional tine arrangement
For approximately 10% higher working speeds than with conventional tine arrangement
Uniform, wide distribution of the harvested material

Tool-free adjustment of the spreading angle
Double-spring tines, on average 9.5 mm thick, with 5 turns each
Tines are of equal length and made of Super C-tine quality
Tine trailing can be adjusted to -7 degrees/0 degrees/+7 degrees
Tine loss protection, integrated
Protective bar holder, supporting the inner rotors, made of steel, outer rotors made of glass fiber reinforced GRP
Tedpfx Aio Af R Hie Ted
Warning signs with LED lighting
Rotor tires: 14 x 16 x 6.50-8
Transport width: 3.00 m
Weight: approximately 2,900 kg
Hydraulic requirements: 1x double-acting valve for folding, 1x single-acting valve for the pre-turning position
Assembly time for the base machine: approximately 14.0 hours

The listing was translated automatically. Translation errors are possible.