CLAAS Volto 900

CLAAS Volto 900

Condition: used, Year of construction: 2014, Used, ready-to-use rotary spreader for three-point linkage Serial number: G5401330 Year of manufacture: 2014 8.70 m working width CKL damping system with integrated overrun brake PTO shaft Main and rotary gearboxes hermetically sealed and permanently lubricated 8 rotary discs with 6 tine arms each MAX-SPREAD material flow concept with tangential tine guidance Double coil tines, 9.5 mm Hjdpfx Aie Agv Sgs Tew Tool-free adjustment of spreading angle, 12° and 16° Tine loss protection Outer wheels 16 x 6.5 - 8, inner wheels 18.5 x 8.50 - 8 Hydraulic swath curtain

Condition: used, Year of construction: 2015, Used turner – requires repair!!! Rotors are hitting each other. Year of manufacture: 2015 Serial number: G5402133 Hodpfj Agv R Aex Ai Tsw with 8.70 m working width with feeler wheel on the three-point linkage with Max Spread system with lighting

Condition: used, Year of construction: 2016, Turner for 3-point hitch, Cat. II Working width 8.70 m Drive 540 rpm 8 rotors with 6 tine carriers each Rotor diameter 1.50 m Rotor gearbox hermetically sealed and permanently lubricated Main frame made of square tubes offset by 45° with 8 mm wall thickness CLAAS power flow linkage (CKL): Damping elements for smooth trailing behavior, even when cornering Direct support of the entire weight in a single force line against the lower links of the tractor Automatic centering when lifting at the headland PERMALINK drive concept: All rotors are movably connected to each other For folding movements up to 180° for a compact transport position MAX SPREAD material flow concept: Tangential tine arrangement angled 29.3° to the rear Tines work 33% longer in the forward direction than with a conventional tine arrangement For approx. 10% higher working speeds than with a conventional tine arrangement Uniform, wide distribution of the harvested crop Tool-free adjustment of the spreading angle Double coil tines Ø 9.5 mm with 5 turns each Hedo Agh Ncjpfx Ai Tew Tines are the same length and in Super C tine quality Tine trailing can be adjusted to -7°/0°/+7° Tine loss protection, integrated Protective bar holder made of fiberglass-reinforced GRP Warning signs with lighting Rotor tires 6 x outer 16x6.50-8 and 2 x inner 18.5x8.50-8 Transport width 2.98 m Weight: approx. 1,140 kg Hydraulic requirements: 1 x double-acting

Condition: new, Year of construction: 2025, Errors and prior sale excepted. CLAAS Volto 900: -Year of manufacture: 2025 / Model year: 2026 Hjdpfj Agbvasx Ai Tjw -Working width: 8.70 m -Deflector for edge spreading control - hydraulic pivoting -Deflector plates for wheel axles.

Condition: used, Year of construction: 2016, A video of the test run is available. Schwadtuch Year of manufacture: 2016 Hodpfxs Agarbe Ai Tow First use: 2017

Condition: new, Year of construction: 2026, Claas VOLTO 900 - Turner for 3-point linkage, Cat. II - Working width 8.70 m - Drive 540 rpm - 8 rotors with 6 tine carriers each - Rotor diameter 1.50 m - Rotor gearbox hermetically sealed and permanently lubricated - Main frame made of square tubes offset by 45° with 8 mm wall thickness CLAAS Power Flow Linkage (CKL): - Damping elements for smooth trailing behavior, even when cornering - Direct support of the entire weight in a force line against the lower links of the tractor - Automatic centering when lifting at the headland PERMALINK drive concept: - All rotors interconnected and movable - For folding movements up to 180° for a compact transport position MAX SPREAD crop flow concept: - Tangential tine arrangement angled 29.3° to the rear - Tines work 33% longer in a forward direction compared to conventional tine arrangement - For approximately 10% higher working speeds than with conventional tine arrangement Hsdpfx Ae Af Nunoi Tsw - Uniform, wide distribution of the harvested crop - Tool-free adjustment of the spreading angle - Double coil tines Ø 9.5 mm with 5 coils each - Tines of equal length and in Super C tine quality - Tine trailing adjustable to -7°/0°/+7° - Tine loss protection, integrated - Protective bow holder made of glass fiber reinforced GRP - Warning signs with lighting - Rotor tires 6 x outer 16x6.50-8 and 2 x inner 18.5x8.50-8 - Transport width 2.98 m - Weight: approx. 1,140 kg - Hydraulic requirements: 1 x dw Guide wheel on the three-point hitch Headland lift G86548 Harald Bruhns GmbH Postliner Straße 18 H 19357 Karstädt Tel: Mobile: Errors and prior sale excepted

Condition: used, Year of construction: 2020, Drive shaft, 8 rotors with 6 arms each, hydraulic edge spreading device, lighting. Warning signs, requires repair. Hsdpfxjz San Ne Ai Tow