3-wheel forklift

CLARK GTX20S

Condition: used, Year of construction: 2013, operating hours: 6,450 h, load capacity: 2,000 kg, lifting height: 5,160 mm, free lift: 970 mm, fuel type: electric, mast type: triplex, construction height: 2,040 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Fedpfx Afsycam Io Esga Fork width: 700 mm Mast type: Triplex Front tire type: Solid rubber Rear tire type: Solid rubber Battery voltage: 48V Battery capacity: 625Ah Battery year: 2017 Battery condition: 20 - 40% Load guard, side shifter, Full free lift, Power steering

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. Fsdjxghngepfx Af Ejga You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: good (used), Year of construction: 2017, fuel type: electric, Vehicle description 2 pieces electric forklift LINDE E16C-02 EVO YEAR 2017 Stacker 1 with 6.363 hours Stacker 2 with 6.142 hours both compl. identical in construction !!! 1,6 tons lifting capacity 2,1 meter headroom 4,62 meters lifting height - Triplex free lift mast - sideshift - loader - Working headlight Fgedpfx Afsipqz Eo Eja - original paint - ready for immediate use Selling price: 18.500,-- net per forklift !!! Also favorable delivery possible !!!

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, input voltage: 400 V, Thieme 520 semi-automatic angular-opening machine Fedpfxsxk T D Us Af Ejga Year of manufacture: 1996 Print format: 750 x 1050 mm Condition: Final stage of restoration Sartech is a company specializing in screen printing, automation, and robotics solutions, as well as the manufacture of UV (electronic) or hot air curing tunnels.

Condition: used, Year of construction: 2018, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 8945646465, total width: 2,000 mm, total length: 12,000 mm, total height: 1,800 mm, overall weight: 3,500 kg, air demand: 1 m³/h, Digital textile printing machine, pigments inks, GOTS and Oekotex 100, class baby articles, printing width 1.80m Technical specifications - Ink type: Kornit NeoPigment™ Intenso, water-based - Color channels: 7 (CMYK + Red, Green, Grey) - Pre-treatment: integrated 8th channel - Print heads: 64x Spectra Polaris (recirculating) - Print width: up to 180 cm - Print speed: up to 200 m²/h - Print resolution: 400–1200 dpi (recommended 600 x 600 dpi, 6-pass, interlaced) - Ink capacity: 4 liters per color Fedpfx Afjw Tynms Eega - Weight: approx. 3,500 kg - Power supply: 3-phase, 25 kW, 110/220 V, 50/60 Hz

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Tunkers Vorwärts S1100 fully automatic sheet to sheet laminating machine. Fedpfsv Rpknjx Af Eoga Sheet to sheet laminating machine which is in good condition and was used a few times for specific jobs. Dismantled and packed, ready for shipment.

Condition: like new (used), Year of construction: 2012, input voltage: 400 V, 2 X Zentner Washer 250 - Screen Cleaning Units Fgjdpfsv Dpy Nox Af Eea Unit 1 Unused and New Condition $20,000.00 USD Unit 2 Used - Excellent Condition $16,000.00 USD

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total width: 6,370 mm, total length: 2,150 mm, total height: 2,300 mm, overall weight: 4,800 kg, 340cm sticky belt printer equipped with 8 NEW Kyocera print heads, printer condition like new. In operational status Fgodpfx Ajxvb Ufjf Eoa

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 69,301 h, control type: CNC control, degree of automation: automatic, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser source model: Truflow3200, laser hours: 41,349 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 140 m/min, feed rate Y-axis: 140 m/min, repeat accuracy: 0.01 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: nozzle changer, Trumpf TruLaser 3030 (L20) Laser Cutting Machine Year of manufacture: 2013 Working area: 3000 × 1500 × 115 mm Rated laser power: 3,200 W Control system: Siemens Sinumerik 840 D SL Maximum sheet thickness: Steel (St): up to 20 mm Stainless steel (VA): up to 12 mm Aluminum (Al): up to 8 mm Maximum traverse speed: 140 m/min Positioning accuracy: 0.01 mm Fodpfxoxmpn Uj Af Eega Dimensions: Length: 9,300 mm Width: 4,600 mm Height: 2,200 mm Weight: 12,000 kg Equipment: Automatic nozzle changer, voltage stabilizers included

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 19,995 h, load capacity: 1,300 kg, lifting height: 5,500 mm, free lift: 1,895 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, fork carriage width: 980 mm, fork length: 1,150 mm, empty load weight: 3,076 kg, total length: 1,800 mm, drive type: Elektro, construction width: 1,070 mm, Electric 3-wheel forklift Load centre: 500 mm Fork width: 100 mm Fork thickness: 35 mm ISO class: ISO class 2 = 1,000 – 2,500 kg Mast type: Triplex Fgsdpfjw Hicnsx Af Eoa Technical condition: good Front tyre type: superelastic Front tyre size: 18x7-8 Front tyre condition: 60 – 80% Rear tyre type: superelastic Rear tyre size: 140/55-9 Rear tyre condition: 60 – 80% Battery voltage: 48V Battery capacity: 500Ah Battery manufacturer: Northbatt Battery year: 2025 Battery condition: new Description: New battery Sideshift, 4th valve, front work light,