Thermoforming machine

COMI BL 2200x900x600-NG-EL-PF-DX

Used for the production of inner liners, vacuum forming machine BL 2200x900x600-NG-EL-PF-DX, year of manufacture 2013, serial number C1091, voltage 380V-N-50Hz+PE.

Machine Specifications Summary

Forming & Sheet Dimensions

Maximum inside frame dimensions: 2205 × 905 mm

Mould base maximum size: 2200 × 900 mm

Mould base minimum size: 700 × 500 mm

Maximum sheet size: 2290 × 960 mm

Minimum sheet size: 790 × 560 mm

Maximum mould height: 850 mm (600 + 250 mm)

Maximum formed part height: 600 mm

Maximum sheet stack height: 1000 mm

Sheet support stack height: 144 mm

Electrical Power Requirements

Upper heating power: 93.8 kW

Lower heating power: 80.3 kW

Forming motors: 23.2 kW

Sheet conveyor motor: 4.6 kW

Transport support regulation motors: 0.6 kW

Sheet centering device motors: 0.36 kW

Sheet pick-up motors: 3.0 kW

Cooling fan motor: 5.5 kW

Extraction fan motor: 0.25 kW

Unloading transfer motors: 3.0 kW

Guillotine group motors: 8.1 kW

Conveyor belt motor: 0.75 kW

Thermoregulator units: 25.65 kW

Chiller unit: 16.25 kW

Ancillary equipment maximum consumption: 3.89 kW

Maximum installed power: 269 kW

Typical operating power (50% load): 135 kW

Pneumatic System

Forming tank capacity: 2 m³/cycle

Pneumatic system pressure: 600 kPa

Air consumption (VGS): 0.85 m³/cycle

Air consumption (movements): 0.35 m³/cycle
Gjdpszumrmjfx Aixjka

Air consumption (cooling): 0.90 m³/cycle

Air consumption (pressure forming at 200 kPa): 3.2 m³/cycle

Total air consumption: 4.85 m³/cycle

Mechanical Characteristics

Forming platen closing force: 400,000 N (400 kN)

Maximum mould + reduction frame weight: 2,200 kg

Machine weight: 30,000 kg (30 tonnes)

Water Chiller Unit

Chiller tank capacity: 240 litres + piping

Water inlet pressure: > 0.1 kPa

Water outlet pressure: 0 kPa

Water inlet temperature: 20 to 25 °C

Utilities Required

Electrical supply: 269 kW installed load

Compressed air: 600 kPa pressure, 4.85 m³/cycle consumption

Cooling water: 20-25 °C inlet temperature

Chilled water tank: 240 litres minimum capacity

Fully automatic thermoforming machine designed to shape plastic sheets up to 2200 × 900 mm with a maximum forming depth of 600 mm, suitable for high-capacity industrial applications.

Thermoformer details:

Forming area 2200mm x 900mm

Max forming depth 600mm

3x loading stations.

1 x heating station. - (pre-heating, final heating, upper and lower elements) ceramic/quartz infrared elements

Pressure and vacuum forming operation.

4 x side trimming presses. (rotary) Guillotine.

Scrap collection end station.

Automation: Fully automatic batch processing with operator control panel featuring manual/automatic modes. Industrial-grade construction with multiple access doors, observation windows, and integrated ventilation heat management.

Applications -

High-throughput environments; this COMI machine is ideal for producing refrigerator liners, door panels, containers, and other thermoplastic components where consistent quality, large sheet handling, and repeatable forming cycles are essential.

The listing was translated automatically. Translation errors are possible.