Under table cut saw rotatable

COOK Drehtisch - Untertisch

Condition: good (used), Year of construction: 2019, Functionality: fully functional, input voltage: 400 V, track width: 400 mm, FPT Contact Cooker Teflon frying line conveyor oven 400V electric. Model BC 90-4. Year of manufacture 2019 Manufacturer FPT Food Process Technology AB Sweden Belt length Teflon upper belt 160cm. Belt length Teflon lower belt 180cm Frying plate top and bottom dimensions 90cm long 40cm wide Machine workshop tested in good working condition Sale only to traders without guarantee without warranty without return in condition as shown in photo Lelhcdwsvmdbys Dshd

Condition: not inspected (used), Manufacturer: SERRA Loljgu U Unohcdw Dshd

Condition: like new (used), spare parts + accessories Rex + Kupfermühle + GreCon + Dimter + Cook Bolinders various in stock Kupfermühle Rex Dimter Lololifbdohcdw Djhd Grecon Cook Bolinders

Year of construction: 2011, Condition: used, Functionality: fully functional, Finger jointing line for cross sections up to 200 cm² (80/240 mm or 100/200 mm), with the following. components: 1. HOWIAL tilt unstacking - SH/4t - 1,75x1,75x6,00m - 4t - short. Length 2,50 m, semi-automatic separation of the package. For tilting the wood pile up to 45°. Electric motor drive. stack dim. max. 1,75 x 1,75 x 6,00 m max. stacking load 4 t shortest wood length 2,5 m 2. HOWIAL - VE 1 lamella separator for crosscut saw. With pneum. controlled tongues, on which the material is marked for defects, deposited on the roller conveyor below. 3. HOWIAL - evaluation roller conveyor RO-1 digital wood moisture measuring, control and recording system for autom. recording and control of wood moisture in cycle measuring method according to electric resistance principle. 4. gann DMT-8 dig. Wood moisture measuring, control and recording system for automatic detection and control of wood moisture in the cycle measuring method according to the electrical resistance principle. Plant in large switchboard complete with ink jet printer. 5. HOWIAL - crosscut saw AS-30 B pneum. Under table crosscut, with 2 autom. feed units, autom. crosscut. Special photocell control for detection of fluorescent line markings. Automatic waste disposal possible. Saw motor power 7,5 kW saw blade diameter 700 mm feed drive approx. 2 x 1,5 kW Air pressure 8 bar feed speed max. approx. 60 m/min. 6. HOWIAL - conveyor belt cut off waste, with studded belt and guide plates belt width 350 mm belt 2000 mm long belt speed 0,4 m/sec. 7. HOWIAL - double roller conveyor RO-2 6,00 m long incl. transversal transport, drive by round belt, all rollers driven. Cross transport chain conveyor. Ejection ± moisture right Transport speed adjustable 100 m/min. length approx. 6,00 m Width of rollers approx. 400 mm Diameter 112 mm 8. compact finger jointing machine Cook Bolinder The technical data are original from Cook Bolinder: wood width from 75 to 245 mm Lhjlji Ezx Djhcdw Ded Timber thickness from 20 to 105 mm Input lengths from 1m to 6 m Cross sections from 30 cm² to 200 cm² Pressing force 5 - 22 to Spindle diameter 50 mm tine profile 15/15 spindle speed approx. 6000 upm Total electrical connected load approx. 62 kW Machine weight approx. 9 to. Gluing OEST comb system for PU Modern Telemechanique SPS control. 9. HOWIAL - Roller conveyor with destacking system Driven roller conveyor with autom. ejector and hydr. driven destacking arms. Technical data: H: 920 mm L: approx. 12.000 mm 10. safety fences incl. circuit breaker 11. finger joint testing machine BSPLT-100 Testing machine for finger joint bending test according to DIN 1052-1/A1 and EN 385 Support distances freely adjustable, attached dimension scale, autom. calculation of support distances in the software. Fully automatic test procedure by mouse click on PC (not included). Alternatively, the test procedure can be started by key operation on the front panel. Connection of any commercially available PC or laptop (Win 2000/XP) via the supplied RS232 serial cable. Fully automatic measured value logging as well as automatic logging in MS-Excel with graphical display. Representation max. wood width: 300 mm max. wood thickness: 140 mm max. compression force: < 100 kN max. support length: 2100 mm Measuring accuracy WITHOUT DISMANTLING

Condition: good (used), Platform size: 1200 x 900 mm Lhelhjpy Duvscdw Dod

Condition: new, Year of construction: 2023, Application combs 15 mm Lhslhcdwjiacbps Dsd Application combs 20 mm finger joint profile 15 mm finger joint profile 20 mm delivery time 3 days

Condition: used, Roller conveyor + cross conveyor + roller conveyor good technical condition Lholhcdwsk Ritpo Ded

Condition: new, original 3D Demmeler and Siegmund octagon octagon welding table tops, 2D and 3D Lolhcdwet Slbuo Dshd different sizes available: 2 x 800 x 200, 28 mm hole 2 x 1200 x 25, 28 hole 1 x 1200 x 200, 28 mm hole (with 8-hole 500 x 500 mm holder) 2x 1800 x 25, 28 mm hole 1 x 1800 x 200, 28 mm hole

Condition: new, Year of construction: 2024, load capacity: 1,500 kg, Special price promotion 2000.-€ discount Perforated table 1200 x 2400 x 200mm Thickness of the table top 20 mm, diameter of the holes 28 mm Swivel range 360 Lslhcsuua Insdw Dshd Height adjustment Hydraulic motor 800 to 1200mm Speed 0.5 rpm Motor power 0.75 KW We offer the tables in many sizes and load capacities: Load capacity 500 Kg, dimensions 1000mm x 1500mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 1000 kg, dimensions 1000mm x 2000mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 1500 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 2000 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 3000 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 5000 kg, dimensions 1500mm x 3000mm x 200mm, bore 28mm with manual or automatic height adjustment

Condition: excellent (used), Complete 2 basket system for cook chill process, designed for rice, pasta and noodles etc. Wxcellent condition, bought new by a small ready meals factory in Wembley. Ljljvuvbhehcdw Dshd

Condition: excellent (used), Year of construction: 2009, clamping force: 1,800 kN, screw diameter: 35 mm, displacement volume: 193 cm³, injection weight: 175 g, mold height (min.): 305 mm, ejector stroke: 200 mm, Equipment: documentation/manual, Battenfeld HM 180 /525H/60V Clamping force: 180t Year of manufacture: 2009 Injection weight in HP: 175/20.8g Injection unit .../525/...60 Screw diameter: 35/18 mm Spec. injection pressure: 2743/2593 bar Injection volume: 193/22.9 cc Injection weight in HP: 175/20.8 g L/D screw ratio: 22/20 Clamping unit 180/... Clamping force: 180 t Clearance between tie bars: 570 x 520 mm Mold installation height: 305 mm Ejector travel: 200 mm Lholhoumbikocdw Dod Equipment: - Servo drive rotary table - 3 x hydraulic core

Condition: excellent (used), Year of construction: 2013, operating hours: 42,160 h, Functionality: fully functional, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 2 bar, injection weight: 184 g, overall weight: 11,200 kg, Arburg 1500T 2000-400 rotary table vertical machine Machine no. 225999 You can find the complete equipment on the downloadable documents - machine card Control: Selogica « Year of manufacture, 2013 * Total machine cycles only 1,907,296 « Operating hours automatic 42160 Clamping unit Plate spacing: 700 mm Clamping force: 200 to/ 200 kN Tool installation height: 400 mm Table diameter: 1500 mm Angle of rotation: 180° Rotation time: 2.4 s min. Weight on rotary table: 1050 kg Ejector force: 45 kN/ 175 mm ejector travel Injection unit Screw diameter: 40 mm Displacement: 201 cc Injection weight: 184 gr. Injection pressure: 2000 bar Extras « 2-station rotary table 180° forward/backward alternating with servo-electric rotary drive and hydraulic fixing pin for fine centering of the rotary plate in the end position; separating protection between the closing and insertion area, height adjustable on the rotary plate to the tool bases, with the option of attaching media lines and connections for the tool bases - Rotary table diameter mm 1500 - Closing force max. kN 2000 Injection unit according to EUROMAP 400 Screw diameter 40mm Special model rotary table ergonomic design with the following features: © - Corrosion protection treatment for rotary table (VE 574/90) © - Water connections 2 circuits © -3 hydraulic connections for needle closure system © -3 x core pull © -Per station: one core pull and 2 x temperature control © -6 x tool temperature control © -12 zone tool heating circuits Loleuuf Iaohcdw Dehd © -Kistler internal pressure sensors (2x) © -Temperature query for start-up parts Weight: 11,200 kg. Energy: 22KW motor - heating power: 9.4 KW 5 zones - connection value 100 A the machine is offered functionally tested fully functional with commissioning guarantee - tested before dismantling For information about the machines we offer and our company - we only sell our own machines purchased from ongoing production from our Hanover warehouse - all machines offered are checked and tested before dismantling - we do NOT sell insolvency goods - we are NOT an agent who deals with third-party property. - all machines offered come from successful companies for which maintenance and care is a matter of course - all machines offered can be viewed in our warehouse

Condition: used, DIVERSE ROBOTER DREH-TISCH Lhslhsdkq Hqjcdw Ded 7 PIECIES

Condition: ready for operation (used), Lehmann NC dividing head with PL gear 420-112 rotary table Serial number: A4199 Material number new: 829070AR1 / Material number old: WM780647B,used, normal signs of wear, 100% functional, scope of delivery according to photos,ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Ljlhot Sn Udjcdw Dshd

Condition: good (used), Year of construction: 2017, Ambit Cook and Quench 2017, Stainless, Four tank washing line with cook and quench system, previously used for cooking 500Kg Chickpeas per batch, consists of four washing tanks, elevator conveyor, cook and quench system, discharge table, 3Ph Lelhcdwounbn Ne Dohd

Condition: good (used), DC Norris cooking system, comprises of 300 litre and 500 litre vessels with independent control panels, a tote bin hoist and a transfer pump. Machinery in nice ex factory condition and being removed from the factory in Europe at the end of January 2025. Lhslovuh Rhehcdw Ded

Condition: used, DIVERSE ROBOTER DREHTISCH EXPERT Lolhcdodkq Ehow Djhd 7 PIECIES

Condition: ready for operation (used), Maho turntable for MH 800 C without motor and encoder - Height: 59cm / Width: 61cm / Length: 90cm, used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Lhelhcdotvct Hew Djd

Condition: excellent (used), Year of construction: 2018, 2500 litre system for cooking and cooling ready meals, soups, broths, fruit preparations, jams and marmalades, traditional and international dishes, sauces and pastes, confectionery. Installed new in 2018 at a cost of over £400,000 Loloqz Iuvshcdw Dohd

Condition: used, Stephan Cooker model UM 130 E - GNI, serial Number 716.293.01, year 1990, indirect heating, manual overturning, equipped with steam heating cavity and/or hot water at 1.5 Bar max, double speed cutter motorisation, scraping mixer stirrer, From the following indicative characteristics: Product tank capacity: 130 Lt Tank capacity: 130 Lt Emptying : Discharge Valve or Tip over process Maximum operating temperature: 95°C Cutter motorisation: 2 - 4 Poles, 33-29Kw Mixer motorisation: 1.1 Kw Supply voltage : 380 Volts 3F+T 50 Hz Lolhcdwevirtce Djhd Noise emissions: 70 Decibel Machinery weight: 350 Kg

Condition: new, Year of construction: 2024, load capacity: 300 kg, Equipment: foot remote control, rotational speed infinitely variable, Protec KT 300 H welding turntable, 170/400 special version Horizontal load 300 kg, tilted 150 kg Power consumption 220 V, 50 Hz Table diameter 450mm Hollow shaft diameter 170mm Table height 500mm Welding current transmission 400 A Lhslhcdevbrqxow Djd Quick-action chuck diameter 300mm, surcharge 550.-€ Quick-action chuck diameter 400mm, surcharge 750.-€ Crank gear motor 0 - 90° stepless adjustment Infinitely variable speed 0.01 to approx. 5 rpm. incl. foot remote control Digital display with welding time limiter (if required)

Year of construction: 2002, Condition: excellent (used), Type: Combi 12110 TF Serial number: combi-121100102-tf Year of construction: 2002 Belt width: 1100 mm Cooking length: 11000 mm Heating: thermal fluid, 600kW Steam: 140 kg/h per valve Exhaust: 2 x 1000 m³/h Lelhcdwjqwycts Djhd Compressed air: 8 Bar Power: 3 x 400V, 50Hz, 20kW Dimensions: 13500 x 1750 x 2400 mm With belt washer and belt tension device

Condition: good (used), continuous grilling line all stainless steel bottom contact grilling + hot air steam injection belt width 1.000 mm net length 4.750 mm electrically heated 276 kW underplate max. 260°C air temperature max. 280°C belt washing system adjustable speed Ljlovvta Djhcdw Djhd dimensions (l x w x h) : ± 6.600 x 1.500 x 2.300 mm

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, input voltage: 400 V, For sale is the oven cooking pot shown in the pictures, VOK. Gas-fired, direct heating. Hydraulic bowl and mixer movement. The total capacity of the bowl is 190 liters, but it is suitable for cooking about 150 liters at a time. Suitable for cooking soups, stews, jams, sauces. Suitable for cooking rice and pasta, etc. In good condition. Made in Taiwan. Total dimensions: 1550 mm x 1400 mm x 2000 mm Lhslovyinxehcdw Dod

Condition: new, Year of construction: 2024, load capacity: 3,000 kg, 3000 kg load capacity welding turntable, very robust Lhjletuqd Uehcdw Dsd Speed infinitely variable from 0.05 to 0.7 rpm Turntable diameter 1400mm Inclination up to 135 Height horizontal 14650mm, tilted to center 1265mm Length 2.12 m x width 1.4 m with hand remote control and double foot remote control