Universal machining center
Deckel Maho 70 eVolution

Name: Deckel Maho 70 eVolution
Brand: Deckel Maho
Availability: InStock

Year of construction

2004

Condition

Used (fully functional)

Location

Salzgitter Germany

Universal machining center Deckel Maho 70 eVolution

Machine data

Machine type:: Universal machining center

Manufacturer:: Deckel Maho

Model:: 70 eVolution

Year of construction:: 2004

Condition:: excellent (used)

Functionality:: fully functional

Operating hours:: 29,000 h

Price & Location

Location:: Helene Weber Ring 28, 38228 Salzgitter, Deutschland

Call

Technical details

Travel distance X-axis:: 750 mm

Travel distance Y-axis:: 600 mm

Travel distance Z-axis:: 520 mm

Controller manufacturer:: Haidenhain iTNC 530

Rotational speed (min.):: 20 rpm

Rotational speed (max.):: 18,000 rpm

Spindle speed (max.):: 18,000 rpm

Operating hours of spindle:: 16,000 h

Number of slots in tool magazine:: 92

Equipment:: chip conveyor, documentation/manual

Details about the offer

Listing ID:: A227-30957

Update:: 10.09.2026

Description

5-axis machining center
Travel ranges: x = 750 mm, y = 600 mm, z = 520 mm
Spindle speed range: 20 – 18,000 rpm
Dwedpezz Ahqefx Aktsb
Tool holders: HSK63
Laser tool measurement system integrated in the machine
High-pressure internal cooling through the spindle center, 40 bar
Tool magazine with 92 positions
Year of manufacture: 2004
General overhaul: 2021
The following was done during the overhaul:
Hydraulic lines replaced
Linear guides and ball screws in the x, y, and z axes replaced, including bearings and timing belts
Scrapers and bellows replaced

Most recently (2026):
Z-axis servo motor repaired
Hydraulic unit for lubrication replaced
AC servo controller for the x-axis replaced
The machine is equipped with a 3D probe and a band filter.

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2007

4 listings online

Call

Send inquiry

Telephone & Fax

+49 5341 ... show

Fax:

These listings may also fit your interest.

Listing

Machining Center - Universal DECKEL MAHO DMU 70 eVolution

Oelde

7,700 km

Machining Center - Universal
DECKEL MAHODMU 70 eVolution

Call

Condition: used, Year of construction: 2002, x-travel 750 mm y-travel 600 mm z-travel 520 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW Dwodpfsuntmdex Aktsb max. Torque 130 / 87 Nm tool taper HSK-A63 table surface area 700 x 500 mm Swivel range B-Axis 0 - 180 ° Swivel range C-Axis 0,001 ° max. table load 350 kg center hole 30 H6 mm T-slots 7x 14H7 x 63 mm table turning speeds 21,5 rpm number of toolpositions 32 pos. max. tool length 315 mm max. tool diameter 105 mm max. tool-dia with free toolbox 130 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 50 / 50 / 50 m/min feed speeds 20.000 mm/min Feed force X / Y / Z: 8 / 8 / 7 kN total power requirement 50 kVA weight of the machine ca. 8,5 t dimensions of the machine ca. 6,5 x 3,5 x 3,5 m 5 Axis-CNC-Machining Center DECKEL MAHO - DMU 70 eVolution - 5 Axis - NC-Swivel-Rotary-Table - Operating-Hours: Power-On: ca. 62.500h / Spindle: ca. 15.100h

See details

Auction

Universal machining center Deckel Maho DMU 70 evolution

Nordrhein-Westfalen

7,681 km

Universal machining center
Deckel MahoDMU 70 evolution

Details

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,183 h, functionality: fully functional, machine/vehicle number: 15035709304, travel distance X-axis: 700 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, swivel angle B-axis (max.): 180 °, swivel angle C-axis (max.): 360 °, The machine will remain powered until 06.03.2026. TECHNICAL DETAILS Travel distances X-axis travel: 750 mm Y-axis travel: 600 mm Z-axis travel: 520 mm C-axis: ±360° B-axis: 180° Spindle type: SK-40 Spindle speed: 18,000 rpm Rotary table Clamping surface: 700 × 500 mm T-slot spacing: 63 mm Number of T-slots: 7 T-slot size: 14 H7 Centering bore: 30 H6 Rotary axis torque: max. 1,674 Nm Table rotation speed: max. 21.5 rpm Swivel torque: max. 2,019 Nm Swivel speed: 18.9 rpm Swivel range: 0 – 180° Input/display unit: 0.001° Maximum tool length from spindle nose: 315 mm Maximum tool weight (with automatic tool changer): 6 kg MACHINE DETAILS Control system: Siemens 840D Shop Mill Djdpfeymmpdex Aktewb Operating hours Power-on hours: 65,794 h Spindle hours: 18,183 h Dimensions & Weight Machine dimensions (L x W x H): 2,604 x 2,820 x 2,785 mm Machine weight (including base): 9,255 kg EQUIPMENT 5-axis simultaneous machining 32-position tool changer Chip conveyor IKZ (internal coolant supply) with 70 bar Blum TC50 spindle probe

See details