Machining Center - Vertical

DECKEL MAHO DMC 635 V

Condition: ready for operation (used), Year of construction: 2011, operating hours: 2,265 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 810D Powerline, total height: 2,650 mm, table load: 600 kg, overall weight: 5,500 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V eco was manufactured in 2011. It features a Siemens Sinumerik 810D Powerline control system, a tool holder SK 40, and a tool magazine with 20 positions. The machine offers a spindle speed of up to 10,000 rpm and a rapid traverse speed of 25 to 30 m/min in X/Y/Z axes. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V eco vertical machining centre. Contact us for more information about this machine. • Tool magazine: 20 positions • Table size: approx. 790 × 560 mm • Coolant: external only; no internal coolant • Notes/condition: Screen may be defective • Error message during tool change (see images) & contours/drilling patterns can no longer be programmed Additional equipment • 3D probe • Chip conveyor: not included • Internal coolant: not available (external coolant supply only) Hnedpfx Ahox D D Htjujg Dimensions Machine Depth 2050 mm

Condition: used, Year of construction: 2012, x-travel 635 mm y-travel 510 mm z-travel 460 mm control SLIMline Siemens turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 13 / 9 kW Torque 83 / 57 Nm tool taper SK 40 table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min rapid traverse 30 m/min total power requirement 17 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V Ecoline Hodpfx Aox S Rxnohuong - only 9.290 Spindle-Hours

Condition: used, Year of construction: 2012, x-travel 635 mm y-travel 510 mm z-travel 460 mm table surface area 790 x 560 mm spindle taper SK 40 spindle turning speed - stepless 20 - 12.000 U/min spindle drive 13 kW max. torque on the spindle 83 Nm feeds x/y/z -stepless bis 20.000 mm/min rapid traverse 30 m/min ATC 20 Pos. tool diameter if 2 vacant positions 130 mm tool diametre at full load 80 mm tool length - max. 300 mm weight of tools max. 6 kg internal coolant system feed 12 bar control HEIDENHAIN, TNC 620 total power requirement 17 kVA weight of the machine ca. 3,9 t Hnedpsx Nqu Defx Ahujg dimensions of machine L x W x H 3,0 x 1,92 x 2,35 m Accessories: probe HEIDENHAIN, TS 460; electron. hand panel, chip conveyor, coolant

Condition: good (used), Year of construction: 2010, operating hours: 43,000 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rotational speed (max.): 14,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, rotational speed infinitely variable, Machine has 2 pallet. Control is Siemens. Spindle was changes directly frm DMG servis - new spindel has cca 500 hours Hjdov Acpbepfx Ahujng

Condition: used, Year of construction: 2007, Technical details: x-travel: 635 mm y-travel: 460 mm z-travel: 510 mm control: 3D Heidenhain i TNC 530 table-size: 790 x 560 mm table load capacity: 600 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. Hsdpow A I Uuofx Ahueng tool changer with: 20 place spindle hours: 36.050 h operating hours - idle run: 91.000 h total power requirement: 13,9 kW Weight approx.: 3,6 t tool taper: SK 40 range of revolution per miute: 20-10.000 U/min Tool changer: 20-fach dimension machine xH: 3,0 x 2,0 x 2,15 m

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: Siemens, spindle speed (min.): 12,000 rpm, Equipment: chip conveyor, DMC 635 V, Year of manufacture 2005, with Siemens 840 D control and operating mode 4 Main drive: Motor spindle, 12,000 rpm, SK 40 Feed drive: AC servo motors for X, Y, Z axes Feed rate: infinitely programmable, mm/min up to 20,000 Feed force: 5,000 N Input increment: 0.01 mm Rapid traverse: 30 m/min Hnjdpfx Aew Nfbwjhueg Position feedback system resolution: 0.001 mm Working range: X-axis 635 mm, Y-axis 510 mm, Z-axis 460 mm Tool changer: Double gripper, 20 magazine positions Max. tool diameter (without free adjacent slots): 80 mm With free adjacent positions: 130 mm Max. tool length from spindle nose: 300 mm Max. tool weight for automatic tool change: 6 kg Work table: 790 x 560 mm Spacing of T-slots: 100 mm Number of T-slots / size: 4 pcs. H12 Locating slot / size: 1 pc. 14 H7 Max. table load (centered): 600 kg Floor to top of table: 720 mm Chip conveyor: scraper belt Tank capacity: 200 liters Delivery rate: 22 l/min Delivery pressure: 3.7 bar Coolant nozzles: 6 pcs. Discharge height: 800 mm Chip discharge chute dismantled: 1,100 mm Connection data: I n max. at 100% duty cycle 50 A, Power consumption at 100% duty cycle 35 kVA Max. main fuse: 64 A Machine weight: 3,670 kg, Installation weight: 4,470 kg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,729 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, total height: 2,650 mm, table load: 600 kg, overall weight: 5,500 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It's a vertical machining centre equipped with a measuring probe and a 3D button, ideal for precise machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information about this machine. • Tool magazine: 20 stations • Table size: approx. 790 × 560 mm Hnsdpox D Epcjfx Ahusg Additional equipment • 3D probe • Coolant: external coolant supply only (no through-spindle/internal coolant) • Chip conveyor: not included Dimensions Machine Depth 2050 mm

Condition: used, Year of construction: 2012, Milling machines Travel distance X: 635 mm Travel distance Y :510 mm Travel distance Z: 460 mm HSC-machines Number of axis: 3 milling machine / machining center Control: Heidenhain TNC 530 spindle chuck: SK 40 spindle revolutions: 18000 rpm table size X: 790 mm table size Y: 560 mm max. workpiece weight: 600 kg tool changer: 60 - time input Power : 13 kW spindle cooling chip conveyor incl. pallet changer Hnodpfxev Tx Two Ahuog incl. measuring probe

Condition: ready for operation (used), Year of construction: 2005, operating hours: 35,966 h, functionality: fully functional, machine/vehicle number: 1540501429A, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 400 mm, controller model: Siemens 840D powerline, rotational speed (max.): 8,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Travel X-axis: 635 mm Travel Y-axis: 510 mm Travel Z-axis: 400 mm Control: SIEMENS 840D powerline Torque: 82 Nm Drive power: 13/9 kW Speed (max.): 8,000 rpm Tool holder: 40 SK Number of slots in tool magazine: 20 Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Feed rate X-axis: 10 m/min Feed rate Y-axis: 10 m/min Feed rate Z-axis: 10 m/min MACHINE DETAILS Rated power: 20 kVA EQUIPMENT Hnjdpfjwr Acxjx Ahusg - Infinitely variable speed - Chip conveyor - Linear guide X/Y/Z: roller recirculating guide - Tool release: pneumatic

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: 1540503266A, TECHNICAL DETAILS X axis: 635 mm Y-axis: 510 mm Z-axis: 460 mm Control: Heidenaihn İTNC 530 Hsdsng Amvepfx Ahuong Number of tools: 30 Tool holder: SK 40 MACHINE DETAILS on request EQUIPMENT Direct path measuring system X,Y,Z Measuring probe Heidenhain TS640 Spindle conveyor Operating mode 4