Milling machine

DECKEL FP 1

Condition: good (used), Year of construction: 1988, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 210 x 600 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: Safety cover and LED lamp retrofitted in 2016 Gcjdpex D T Nqsfx Ah Iea 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment

Condition: reconditioned (used), Year of construction: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 milling machine equipped with a 3-axis Heidenhain TNC113 active control, notable for its ease of operation. This modern version, built in 1989, features central lubrication, an electric coolant pump, and a machine lamp, among other benefits. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on-site at any time. Gsdpfx Ahopy Eldo Isca Delivery time: on request Machine no.: 2102-xxxx Table: Rigid angled table or rotary-tilt-swivel table Travel (X/Y/Z): X 300 mm / Y 160 mm / Z 340 mm Quill travel: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool taper: SK40 Feed: Infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: 3-axis Heidenhain TNC113 digital readout with active control, infinitely variable feed regulation on all 3 axes, coolant unit, central lubrication, technical documentation, leveling feet, safety equipment (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines undergo thorough inspection - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - If required, you can order additional accessories such as tools, etc., directly - We can also install further equipment such as safety devices upon request - We are happy to handle shipping and/or installation

Year of construction: 1990, condition: good (used), Various collets and holders Approx.300 pieces. For DECKEL milling machines FP1 -FP2-FP3-FP4 Single sale demand inquiries. Gedpfx Ahohvz Iis Ieca

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 1 Year of construction: 1976 - workshop tested Machine no.: 53426/08 geometric acceptance with test report Accessories: - 3-axis digital display Gjdpoflc N Asfx Ah Ioca Heidenhain ND 750 - Fixed table 600 x 210 mm (T-slot 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Counterholder with counter bearing - Operating instructions - used, as seen, but without guarantee -

Condition: excellent (used), Year of construction: 1986, travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 290 mm, Year of manufacture: 1986 Gcsdpfx Aowgafyjh Ioa Travel paths: X = 300 mm Y = 160 mm Z = 290 mm Equipment: Standard accessories Vertical milling head, SK 40/20x2 Fixed angle table 210 x 600 mm, NEW! Retrofitted safety device for milling spindle, electrically protected, NEW! Active digital display (TNC113), 3 axes Coolant system Machine light Machine feet Documentation Condition: Good, mechanics and control system workshop-tested

Condition: used, Year of construction: 1982, x-travel 300 mm y-travel 160 mm z-travel 340 mm feeds -stepless- 5-500 mm/min rapid traverse 1200 mm/min spindle turning speed range 40 - 2000 U/min tool taper Normkegel 40 table length 600 mm table width 120 mm voltage 380 V frequency 50 Hz rated current 13 A weight of the machine ca. 0,750 t dimensions of the machine ca. 1,8 x 1,5 x 1,8 m DESCRIPTION Machine incl: active three-axis digital readout HEIDENHAIN Gcodpfxjvvnfuo Ah Ija documentation various tool holders Machine vice etc.

Condition: refurbished (used), Year of construction: 1978, Universal tool milling machine Make: DECKEL Model: FP 1 with stepless feed year of construction: ca. 1975 - partly overhauled, new painted, RAL7035 light grey / RAL7012 basalt grey / RAL5012 light blue with warranty geometric acceptance with test report accessories: - 3-axis digital display FAGOR Innova 30i-M, new - fixed table 600 x 250 (T-slot: 12 mm) Gedpodf E H Aefx Ah Ieca - Vertical milling head SK 40 with tightening thread S 20 x 2 - cooling device - operating instructions - used, as seen -

Condition: reconditioned (used), Year of construction: 1984, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1984 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray Mach. no.: 2102-2520 with guarantee Gedpfx Ajhtq Edoh Ieca geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X, Y and Z axes - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions - used as seen -

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray / RAL5008 gray-blue Mach. No.: 52860/08 Milling head number: 7296/80 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-M, new - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions Used as seen The machine corresponds technically Gcjdpfx Aomhfrroh Ioa to the state of the year of manufacture.

Condition: reconditioned (used), Year of construction: 1987, Universal tool milling machine Gcsdpfxshtrd Is Ah Isa Make: DECKEL Model: FP 1 Active Year of manufacture: 1987 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray Mach. no.: 2102-3429 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X, Y and Z axes - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Central lubrication, electric - Operating instructions - Used as seen -