Milling Machine

Deckel FP 1

Condition: ready for operation (used), Travel X/Y/Z: 290mm/150mm/330mm, vertical head stroke: 100mm, tool holder: SK40, speed: 2000rpm, feed rate: 500mm/min, rapid traverse: 1200mm/min, table dimensions X/Y: 600mm/195mm, max. table load: 150kg. Machine dimensions X/Y/Z: approx. 1250mm/1200mm/1400mm, weight: approx. 1800kg. On-site inspection is possible. Djdpfex Hz Rkjx Adveun

Condition: ready for operation (used), Max. rotational speed: 2000/min, with instruction manual. Dodpfx Aelbmtgodveun

Condition: used, tool adaptor 88 Dodpfov Dxzcox Adveun length 560 mm center height of top slides 65 mm weight 17 kg Counter holder / horizontal milling device for tool milling machine Deckel Mod. FP 1 consisting of upper beam and mounting of the milling arbor. The distance from the middle of the milling arbor to the lower edge of the counter holder is 65 mm, the width of the guide is 88 mm. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1982, x-travel 300 mm y-travel 160 mm z-travel 340 mm feeds -stepless- 5-500 mm/min rapid traverse 1200 mm/min Duodpevvnfuofx Advjn spindle turning speed range 40 - 2000 U/min tool taper Normkegel 40 table length 600 mm table width 120 mm voltage 380 V frequency 50 Hz rated current 13 A weight of the machine ca. 0,750 t dimensions of the machine ca. 1,8 x 1,5 x 1,8 m DESCRIPTION Machine incl: active three-axis digital readout HEIDENHAIN documentation various tool holders Machine vice etc.

Condition: excellent (used), Year of construction: 2000, Machine-Details: Stock-No. 1022-2416 Type of machine Tool Room Milling Machine - Universal Make DECKEL Type FP 1 Year of manufacture 2000 Type of control conventional Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min Dsdoyhdbmspfx Advoun spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information: The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: good (used), Internal article no.: 26022 Universal milling machine Deckel FP1 Duedpoxxkwnofx Advon + Accessories (machine vice / dividing attachment / SK40 tool holders / tailstock) An M16 drawbar is installed in the milling head + Additionally, S20x2 drawbar The machine can be inspected under power.

Condition: excellent (used), Year of construction: 2002, Control: 3-axis active path control, Heidenhain TNC 123 Spindle speed: 40 - 2000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque / milling performance Feed rate: 5 to 500 mm/min, infinitely variable Rapid traverse: 1.2 m/min Quill: Extendable vertical quill, 60 mm, SK40 M16 draw thread Duodpfxeyg I Nfe Advon Axes X/Y/Z: 300/160/340 mm Swivel table: 600 x 210 mm, max. load 200 kg

Condition: good (used), Year of construction: 1985, Taxed according to the differential taxation scheme under §25a of the German Value Added Tax Act. You will receive a proper invoice. Djdpfxeygv Ups Advsun Internal item no.: 26006 You are welcome to inspect the machine under power in our heated warehouse area of over 500m². Universal milling machine Deckel FP1 (3-axis active digital) Year of manufacture: 1985 Travel distances: X300 / Y160 / Z340 mm Quill stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: infinitely variable 5-500 mm/min The control system works perfectly, but the LEDs are defective! + Hydraulic machine vice Röhm BB110 The machine comes from an educational institution and is in well-maintained condition.

Year of construction: 1976, condition: good (used), Deckel FP1 tool milling machine, 3-axis Heidenhain digital readout, machine was overhauled by FPS years ago. Rigid table, SK 40 spindle holder vertical, SK 40 horizontal, accessories: various collets and milling arbors, counter holder, good working condition, paint is no longer so nice, can be demonstrated under power by arrangement. Dodpfx Adorhzcuoveun

Condition: reconditioned (used), Please read the technical specifications thoroughly. If you are considering this machine as an investment, we kindly request your complete credentials, including a valid phone number and email address, in order to provide an offer. Deckel FP1 AKTIV (3-axis active) Machine no.: 2102-5745 Year of manufacture: approx. 1988 Travel distances: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment features: - Heidenhain 3-axis active digital readout, type TNC 113 - Infinitely variable feed in X, Y, and Z axes - Quill stroke on vertical milling head: 60 mm - Vertical milling head swivels and can be extended horizontally by 100 mm - Coolant system (coolant tank integrated in machine base) - Documentation - Central lubrication Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically inspected. Geometry check videos can be provided upon request. Backlash Y-axis: 0.15 mm Backlash X-axis: 0.3 mm Backlash Z-axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Parallelism deviation Y-axis: 0.002 mm (measuring distance 150 mm) Parallelism deviation X-axis: 0.002 mm (measuring distance 300 mm) The following parts have been renewed: - Central lubrication checked - Heidenhain digital readout overhauled - Set of wipers installed Duodpfjxpwfgsx Advon - LED indicators for digital readout replaced - Oil change - Vertical milling head newly mounted - Oil sight glass replaced Price quoted is net, ex-stock, loaded.