Tool cutter
Deckel FP4M Aktiv CE Konform

Name: Deckel FP4M Aktiv CE Konform
Brand: Deckel
Availability: InStock

Year of construction

1992

Condition

Used (fully functional)

Location

Ubstadt-Weiher Germany

Tool cutter Deckel FP4M Aktiv CE Konform

Machine data

Machine type:: Tool cutter

Manufacturer:: Deckel

Model:: FP4M Aktiv CE Konform

Year of construction:: 1992

Condition:: excellent (used)

Functionality:: fully functional

Price & Location

Location:: Großer Sand 19-21, 76698 Ubstadt-Weiher, Deutschland

Call

Details about the offer

Listing ID:: A177-76921

Update:: 04.08.2025

Description

Universal Milling Machine Deckel FP4M with 3-Axis Active Digital Readout Heidenhain, Excellent Condition, CE Compliant!!!

Technical Data:
- Year of manufacture: 1992, Machine no. 2203-8449
- Fixed angle table
- Spindle speed: 50 - 2500 rpm
- Feed rate: 8 – 630 mm/min
- Drive power: 3.7 / 4.4 kW
- Spindle brake
- Rapid traverse: 1300 mm/min
- Travel (X/Y/Z): 500/400/400 mm
- Vertical milling head traverseable on column
- Vertical and horizontal quill - SK40 taper
- Vertical quill extendable by 90 mm
- Hydraulic drawbar system
- Approx. weight: 1600 kg

Equipment and Accessories:
- 3-axis active Heidenhain digital readout
- Coolant system
- Chip tray
- Central electric lubrication
- Operating manual, spare parts drawings

About the Machine:
Pgsdou Tuk Hopfx Airot

For sale is a Deckel FP4M Universal Milling Machine (Active) in very good condition. The machine has minimal backlash, and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. The machine features hydraulic tool clamping. The FP4M was only occasionally used in a state-run facility for training purposes. On this newer FP4 model, the feed rates are steplessly adjustable in all three axes, and each axis also features a rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input measurements that the machine will approach automatically. Oil change has been performed; mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2007

92 listings online

Call

Send inquiry

Telephone & Fax

+49 7251 ... show

Fax:

These listings may also fit your interest.

Listing

Neubrandenburg

7,865 km

Milling machine
Deckel MahoMH 1000

Call

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 30216 & 30277, feed length X-axis: 1,000 mm, travel distance X-axis: 1,000 mm, Universal tool milling machine Psdpfx Asp S Schsirsgt Make: MAHO Model: MH 1000 2x available! x-way 1000 mm tool holder SK 40 digital display . Head tiltable +/- . Table tilt and swivel +/- . Quill stroke . - 3-axis digital display - Universal table 1.250 x 740 mm (T-slot 16 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - 6 autom. quill feeds 0,02/0,03/0,05/0,08/0,12/0,20 mm/Umdr. - central lubrication, manually operated The machine can be inspected with pleasure. Immediately ready for use Free loading, transport no problem.

See details

Listing

Germany

7,963 km

Universal Milling Machine
DECKELFP3

Call

Condition: used, Technical details: x-travel: 600 mm y-travel: 300 mm Psdeu U E T Ispfx Airsgt z-travel: 360 mm range of revolution per miute: max horiz. 40- 2000 U/min spindle taper: vert. / horiz. SK 40/ SK40 range of revolution per miute: max zul. 40 - 2000 U/min feed:: 2-3600 mm/min quill travel: 80 mm Table dimensions: 810 x 420 mm total power requirement: 3 KVA machine weight approx.: 1300 kg dimension machine xH: 1,8 x 1,35 x 1,95 m Milling machine with shaping head joint length 32-80mm with 10 x double strokes, 24-285 strokes/min Heidenhain 3-axis displays *

See details

Listing

Tool Room Milling Machine - Universal DECKEL FP2 LB

Goldenstedt

7,653 km

Tool Room Milling Machine - Universal
DECKELFP2 LB

Call

Listing

DECKEL FP1 Aktiv DECKEL DECKEL FP1 Aktiv

Warngau

8,163 km

DECKEL FP1 Aktiv
DECKELDECKEL FP1 Aktiv

Call

Condition: reconditioned (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, quill stroke: 80 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, table length: 210 mm, table width: 600 mm, total height: 1,750 mm, total length: 1,400 mm, total width: 1,600 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 850 kg, table load: 200 kg, warranty duration: 3 months, The machine underwent a factory or partial overhaul by us in 2026 and is in top condition. As part of the partial overhaul, a new brake motor was installed. Control System 3-axis – active – digital display HEIDENHAIN TNC 113 Spindle Speed 40–2000 rpm, geometrically stepped direct drive with 18 speed levels for maximum torque and milling performance Feed Rate 5 to 500 mm/min, infinitely adjustable Rapid Traverse 1.2 m/min Quill Extendable quill, vertical 80 mm SK40 with M16 drawbar thread, optionally with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z 300/150/340 mm Pjdpfx Aeyi Amwsirogt Table Fixed angle table 600x210 mm Maximum table load: 200 kg Features • Vertical and horizontal spindle • Milling head manually swivelable +/- 90° • Z-axis bellows Options • Chip tray • Machine lamp • Universal table • Rotary table • Slotting head • Dividing head • Steady rest • etc.

See details

Listing

Germany

7,963 km

Pipe-Bending Machine
TRANSFLUIDDB618

Call

Condition: used, Year of construction: 1993, Technical details: tube diameter: 80 mm tube diameter min.: 6 mm control for program: Gelma MM-1 tube pipe draw up length: 1800 mm weight of the machine ca.: 0,232 t dimension machine xH: 1,9 x 0,7 x 1,3 m Semi-automatic PIPE BENDING MACHINE Operating modes are manual but also semi-automatic Application: for multiple bending of pipes The swivel unit with bending preselection for 3 different bending angles in single and automatic mode. Pgjdpfx Aieu Ibyyerjt The machine is currently equipped with a stop bar for tube size Ø 10mm for 6 angle settings. The bending machine is movable/adjustable. Equipment/accessories: 6 cam rods/stop rods 6 control disks Bending tool for Ø 12mm *

See details

Listing

Oberweis

8,279 km

Mandrel bending machine
RASIS80.6L

Call

Condition: used, Year of construction: 2006, RASI S80.6L - Mandrel Bending Machine - Mandrel and rotary draw bending of tubes and round profiles - Spiral bending of tubes - Includes tooling and documentation - Year of manufacture: 2006 Technical Data - Tube Ø x wall thickness: 82 x 2.6 mm - Max. section modulus: 12.7 cm³ - Min. tube Ø: 4 mm - Outer bending radius: 228 mm - Inner bending radius: 34 mm Pgsdpfeyvvk Dex Airet - Min. bending radius: 1.5 x D - Max. bending angle (accuracy ± 0.1°): 195° - Return bending speed (programmable): 0 – 9.3 rpm - Forward bending speed (programmable): 0 – 6.6 rpm - Pressure die: fixed / following - Tool configuration: single-, double- or triple-grooved - Bending direction: right - Feed speed (stepless): 0 – 60 m/min - Feed force adjustment during bending: stepless - Rotation speed (stepless): 0 – 60 rpm - Max. rotation angle (± 0.1°): unlimited - Max. tube clamping force: 8 t - Collet clamping range (diameter): 6.5 mm - Bending length: 3 – 6 m - Motor power: 11 kW - Operating voltage: 400 V / 50 Hz - Control voltage: 24 V DC - Machine length: < 7000 mm - Weight: approx. 2500 kg

See details

Listing

Milling machine DECKEL FP 2 Aktiv mit neuer Elektrik

Feucht

8,032 km

Milling machine
DECKELFP 2 Aktiv mit neuer Elektrik

Call

Condition: reconditioned (used), Year of construction: 1987, Universal Tool Milling Machine Manufacturer: DECKEL Model: FP 2 Aktiv Year of manufacture: 1987 – overhauled, newly painted with new machine electrics Pgjdpfx Asx A Eddoirjt RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2202-11579 Milling head type: 2271 Milling head no.: 300-3606 with warranty Geometric acceptance with inspection report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 - Fixed table 660 x 380 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Central lubrication, hand-operated - Coolant system - Operating manual - used, as seen -

See details

Listing

Weißenhorn

8,040 km

Milling Machine - Vertical
EMCOFB-2

Call

Condition: good (used), x-travel 380 mm z-travel 140 mm dist. cutter spindle - workpiece spindle 370 mm distance spindle - column 163 mm table-size 630 x 150 mm quill stroke 40 mm milling head -swivable 360 Grad spindle turning speed range 120-2000 U/min table feed 35/65/170 mm/min Pgjdpjyz Dg Defx Airet voltage 380 V weight of the machine ca. 130 kg total power requirement 0,5 kW dimensions of the machine ca. 0,91 x , 0,68 x 1,80 m Includes 32-piece collet set Includes base cabinet with key Includes small parts Includes operating instructions

See details

Listing

Malsch

7,893 km

Universal Milling Machine
KUNZMANNWF 4

Call

Condition: excellent (used), Year of construction: 1999, x-travel 400 mm y-travel 320 mm z-travel 400 mm Control HEIDENHAIN TNC 410 spindle turning speed - stepless 0 - 4000 U/min quill stroke 60 mm Pgsdpjunt Ihofx Airjt tool taper SK 40 table surface area 650 x 350 mm total power requirement 6,5 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,5 x 1,8 x 2,0 m Electric handwheel HR 410 Probe MP 11, automatic tool measurement TT 120 Cabin, tool holders,...

See details

Listing

Gebhardshain

7,746 km

Spot welding gun
DALEX3427 D

Call

Condition: excellent (used), pneumatically operated, water-cooled spot welding tongs for industrial applications Type DALEX 3427 D Nominal power at 50% duty cycle: 35 kVA Secondary short-circuit current: 20.5 kA Electrode force: 580 daN with double-acting cylinder - long stroke 62 mm - pre-stroke 40 mm Working stroke with stroke adjustment 0-22 mm with universal joint suspension and suspension bracket 10 m connection cable and control cable Electrode arms 350 mm Arm spacing 170 mm with synchronous welding control 15036 Psdpjgibv Eefx Airogt

See details

Tool cutterDeckel FP4M Aktiv CE Konform

Machine data

Price & Location

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

Tool cutter
Deckel FP4M Aktiv CE Konform