Hoist motor 28/12K4P

Demag

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 130 mm, ejector force: 139,000 N, opening stroke: 1,030 mm, plate width: 1,500 mm, plate height: 1,620 mm, TECHNICAL DETAILS Clamping force: 8,000 kN Plate size (h x v): 1,620 x 1,500 mm Clear width between tie bars (h x v): 1,120 x 1,000 mm Mold height: 500 - 1,050 mm Maximum plate distance: 2,080 mm Opening stroke: 1,030 mm Ejector stroke: 350 mm Ejector force: 139 kN Mold weight: 7,200 kg Injection system Screw diameter: 130 mm Displacement: 7,300 cm³ Injection weight (PS): 6,640 g Bwsdjy T Hz Ispfx Aggen Injection pressure: 1,300 bar Screw length: 20 l/d Electrical and hydraulic equipment Rated power of pump motor: 110 kW Heating power: 79 kW Oil tank capacity: 1,300 L MACHINE DETAILS Machine dimensions LxWxH: 12.3 m x 2.7 m x 2.7 m Total weight: 33,500 / 9,700 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8673 0023, clamping force: 15,000 kN, screw diameter: 145 mm, injection pressure: 1,454 bar, plate width: 1,880 mm, plate height: 2,150 mm, Regularly maintained machine - see repair history TECHNICAL DETAILS Clamping force: 15,000 kN Mounting plate dimensions (H x V): 2,150 mm x 1,880 mm Clear distance between columns (H x V): 1,500 mm x 1,250 mm Min./Max. mold height: 700 mm - 1,400 mm Maximum opening distance: 2,900 mm Control: DIAS Injection unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight: 9,880 g Injection pressure: 1,454 bar Electrical and hydraulic equipment Rated power of pump motor: 165 kW Heating power: 97 kW Bwedpfx Aey T Hy Deggon MACHINE DETAILS Net weight with control cabinet: 21,000 t Dimensions (L x W x H): 14.4 m x 3.4 m x 2.9 m Electrical connection Main connection: 3 × 400 V, 50 Hz Control voltage: 3 × 400 V, 50 Hz Repair history 2010: New screw with RSP and tube 2015: New Ibed 2015: New wiring board 2017: Motor and pump 2 new 2017: Injection cylinder BS piston rod new with seals 2017: Circulation pump oil cooler replaced 2017: Teachbox replaced (Rob) 2018: Pumps P 1 + 3 replaced (at 65,800 h) 2018: Hydraulic oil change 2019: New injection valve 2019: Dosing inverter overhauled by Fa. Eichler 2021: Motor P1 new 2022: New RSP EQUIPMENT - Wittmann W 753 Robot - 2008 - Cage and conveyor belt

Condition: ready for operation (used), Year of construction: 2017, clamping force: 1,600 kN, screw diameter: 50 mm, injection weight: 313 g, overall weight: 6,983 kg, Hydraulic injection moulding machine manufactured in 2017. This SUMITOMO SHI DEMAG Systec 160/520-600 features a clamping force of 1600 kN and a tie bar distance of 520 mm. The machine includes an injection unit with a screw diameter of 40 mm, 45 mm, and 50 mm, and a maximum shot weight of 313 g. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 160/520-600 machine we have for sale. Contact us for further details. • Tie bar distance: 520 mm • Injection unit: 600 • Control: S-Dias • Screw diameter: 40 / 45 / 50 mm • Injection pressure: 2438 / 1914 / 1550 bar • Shot volume: 210 / 294 / 363 cm³ • Shot weight (PS): 184 / 254 / 313 g • Injection stroke: 475 / 469 / 396 mm • Injection flow rate: 80 kN • Installed heating capacity: 11.1 / 11.3 / 15.7 kW • Oil tank capacity: 290 l • Pump drive: 25 / 45 kW • Noise level: 69 dB(A) • Dimensions: 5.6 x 2.1 m Bjdpfxezbh Eps Aggown • Main electrical connection: 3/400 V, 50 Hz, 167 A • Max pressure: 190 bar • Platen size: 770 x 770 mm • Max mold weight: 1300 kg • Max opening stroke: 500 mm • Min/Max mold height: 275 / 685 mm • Distance between platens: 1085 / 1185 mm

Condition: excellent (used), Year of construction: 2015, year of last overhaul: 2025, Demag Systec 210-840 (2015) Bwodjzbg Ezjpfx Aggjn Manufacturer: Sumitomo SHI DEMAG Type of machine: Systec 210/580-840 Clamping force [kN]: 2100 Shot volume [cm³]: 358 Clearance between tie bars hor. [mm]: 580 Clearance between tie bars vert. [mm]: 580 Mold height min. [mm]: 340 Mold height max. [mm]: 690 Opening stroke max. [mm]: 575 Daylight max. [mm]: 1365 Year of manufacture: 2015 Machine dimensions L/W/H [mm]: 6022 / 1556 / 2090 Control unit and software version: NC3 Max. weight of entire molding tool [kg]: 3300 Screw diameter [mm]: 45 Screw design: 3 zone Screw relation (length/diameter): 20:1 Screw back flow valve: Yes Ejector system type: Hydraulic Installed heating power [kW]: 39 No. of integrated hot runner circuits: 12 Number of temperature control electrical valves: 28 Number of cascade controls: 2 Connection to central drying system: Yes Unloading robot system available: Yes Number of tempering units: 3 Tempering units max. temperature [°C]: 160 Machine oil capacity [l]: 400 Net power of hydraulic pump engine [kW]: 26

Condition: good (used), Year of construction: 2007, Ref. no.: 18615 Bwodpfjza Dc Ujx Aggen Manufacturer: DEMAG Type: IntElect 80/370-100 NC4 All Electric Year of construction: 2007 Clamping unit Clamping force: 80 ton Opening stroke: 340 mm Distance between tie bars: 370 x 370 mm Mould height min.: 150 mm Injection unit Screw diameter: 25 mm Injection volume: 51 cm³ Shot weight: 45 g Injection pressure: 2000 bar Measurements and weight Dimensions: 4,3 x 1,3 x 2,3 m Machine weight: 4750 kg Further information: A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs. Motor System — Siemens MOTICS 3 Main Drive Motor · Water-Cooled Servo Motor The main drive unit that controls all clamping and injection movements with high precision. Plasticising Motor · Water-Cooled Servo Motor Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production. 5-Axis Full Servo Control The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems. NC4 Control System The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.

Condition: used, Year of construction: 1986, operating hours: 2,000 h, functionality: fully functional, overall weight: 630 kg, motor manufacturer: Deutz, volume flow: 1.8 m³/h, Demag SC20DS construction compressor Year of manufacture: 1986 Bwsdpfozavnvox Aggjn 2,000 operating hours 630 kg 1.8 m³/min 2860 rpm 12.5 kV Deutz 1-cylinder engine: F1/2L 511/W

Condition: new, DEMAG Spare Parts: 1. Transmitter / Circuit Board DRC - DR D3 2. Load Measuring Pin DMR 20 3. CAN Safety Transceiver 4. Brake Ring / Conical KB 160 B - 2 pieces 5. Brake Ring / Conical KB 100 B - 2 pieces 6. Clutch Set 7. Brake Disc 13KF - 3 pieces 8. Swivel Eye DK 20 - 2 pieces 9. Torque Support Set MA 125-1 - 2 pieces 10. Magnet Body for Brake B140 - 1 piece + B050 - 2 pieces 11. Wire Rope Diameter 16 mm - 35 meters 12. Wire Rope Diameter 10 mm - 62.8 meters 13. Gear Limit Switch DGS 3 Bodpswug Nusfx Aggswn

Condition: new, DEMAG brake ring / brake pad / conical brake pad - 50 pieces (new). 1. Type: KB 160 - 2 pieces. 2. Type: KB 100 - 2 pieces. 3. Type: KB 200 - 2 pieces. 4. Type: KB 140 - 2 pieces. Bsdpfx Agoyy Takegjwn 5. Type: KB 125 - 5 pieces. 6. Type: KB 112 - 1 piece. 7. Type: KB 90 - 2 pieces. 8. Type: KB 80 - 11 pieces. 9. Type: No. 405 - 1 piece. 10. Type: No. 616 654 - 5 pieces. 11. Type: No. 620 606 - 7 pieces. 12. Type: No. 612 648 44 - 6 pieces. 13. Type: No. 628 626 44 - 2 pieces. DEMAG brake cover / brake lid - 38 pieces. Various sizes (new / used).

Condition: good (used), Year of construction: 2007, Ref. no.: 18616 Manufacturer: DEMAG Type: IntElect 80/370-100 NC4 All Electric Year of construction: 2007 Clamping unit Clamping force: 80 ton Opening stroke: 340 mm Distance between tie bars: 370 x 370 mm Mould height min.: 150 mm Injection unit Screw diameter: 25 mm Injection volume: 51 cm³ Shot weight: 45 g Injection pressure: 2000 bar Measurements and weight Dimensions: 4,3 x 1,3 x 2,3 m Machine weight: 4750 kg Further information: A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs. Motor System — Siemens MOTICS 3 Main Drive Motor · Water-Cooled Servo Motor The main drive unit that controls all clamping and injection movements with high precision. Plasticising Motor · Water-Cooled Servo Motor Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production. Bwedpfx Agozabkvogen 5-Axis Full Servo Control The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems. NC4 Control System The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.

Condition: used, functionality: fully functional, lifting height: 12,000 mm, load capacity: 25,000 kg, DEMAG Hoist DH1063 H24 25 t 4/1 Main lift motor KBH200 B6 Main gearbox DH1000 i= 50 Micro-travel FG10 Bwodsyyvczopfx Aggon Hoist in used, good condition, functionality tested