5-axis CNC lathe

DN SOLUTIONS LYNX 2100 LMSA

Condition: new, Year of construction: 2024, 600 kg load capacity Welding turntable height adjustable with through hole 100 mm Plate diameter 700mm Horizontal height min. 0.65m, max. 1.25m Hnjdpfeg Tdpgsx Ahueg Height tilted min. 0.45m, max. 0.95m Speed from 0.01 - 1.3 rpm Tilt up to 135° Hand and foot remote control with speed display very robust

Condition: good (used), Year of construction: 2000, Equipment: documentation/manual, LATHE TORNADO COLCHESTER 200 CNC FANUC GE Series DIAM. AUTOCENTRATING MANDRIN : 250 mm CORSE : X : 215 mm Z : 400 mm TOOL MAGAZINE : 12 POSITIONS INCLUDING VARIOUS TOOL HOLDERS AND TOOLS Hedotuut Uepfx Ahujng BAR WIDTH : 65 mm TAILSTOCK IN CYCLE CHIP EVACUATOR INCLUDING ALL DOCUMENTATION

Condition: new, Year of construction: 2025, grinding length: 700 mm, grinding width: 400 mm, COSMOS E 7040 NC Precision Surface Grinding Machine, grinding area 700 x 400 x 350 mm, spindle power 3.7 kW, grinding wheel 300 x 50 x 76.2 mm, Mitsubishi PLC control and drive technology, very user-friendly, incl. magnetic chuck 700 x 400 mm with adjustable holding force, grinding spindle with speed regulation, automatic grinding cycle with rough grinding, fine grinding, spark-out and retraction, dressing with size compensation, coolant system with paper band filter. 12 months warranty. Inspection under power and test grinding possible at any time. We are happy to provide on-site installation and training as well as subsequent service! Financing / leasing available upon request – we will gladly provide an offer! Hnsdpfx Ajrwwt Sehuog

Year of construction: 2022, condition: new, Manipulator with two height adjustable outriggers and face plate. Load: 1.500kg stroke: 800mm swivel range: 300 Hsdefnku Hspfx Ahusng face plate diameter: 1.000mm Welding current: 600A

Condition: new, Year of construction: 2023, Manipulator with hydraulic height adjustment, faceplate with clamping slots and manual remote control. Height (faceplate horizontal): approx. 670 - 2,400mm Swivel range of face plate: approx. +-360°. Hjdpsnqzt Ajfx Ahueng face plate dimensions: Ø1.200mm x 40mm, 6x clamping slots Rotational speed of main axis: approx. 2.0 rpm (other Torque main rotary axis: approx. 13.000 Nm Speed of face plate: approx. 0.2-2rpm Torque face plate: approx. 10.000 Nm

Condition: new, Year of construction: 2026, Fully hydraulic lowering and raising function of the saw frame Hydraulic opening and closing of the vice Shutdown after cutting, return of the saw arm to its starting position Torsion-resistant saw frame made of cast steel (multi-ribbed) Hydraulic short-stroke cylinder for the vice Precision-ground carbide saw blade guides, adjustable Electric coolant pump Manual blade tension with display, including electric saw blade and cutting pressure monitoring Hydraulic vice (opening and closing) Revolving chip removal brush Large, solid round support table, rotating for miter cuts with a predefined cutting channel, manual miter adjustment, readout via scale 500 mm material stop with scale Including combi-toothed saw blade 4/6 Machine color: - Saw frame RAL 7035 - Machine body RAL 7005 Motor: 400 V three-phase, frequency-controlled, 1.5 kW Saw blade dimensions: 2910 x 27 x 0.9 mm Flywheel diameter: 325 mm Cutting speed: 20-120 m/min. Vice clamping width: 320 mm Working height: 760 mm Sawing range: at 0° = round diameter 250 mm, square 240 x 240 mm, rectangle 320 x 190 mm Machine dimensions (W x D x H) 1480 x 1700 x 2000 mm Hnodpfxjcl Tc Ae Ahusg Weight: 420 kg Please inquire about additional accessories. DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2024, DT500EY-650 Siemens 828 D ShopTurn (Fanuc option) CNC turning/milling center with tailstock, driven tools, and a 140 mm real Y-axis, 35° inclined bed, and linear roller guides Available in our showroom Max. swing diameter: 600 mm Max. turning diameter: 320 mm Hsdpfx Ahoqa Dtfoujng Max. turning length: 650 mm Rapid traverse X/Z/Y: 20/20/12 m/min Turret: 12 BMT55 stations 12 of which are driven Max. speed: 4000 rpm, 3 kW Spindle Chuck diameter: 203 mm (optional: 254 mm) Spindle nose: A2-6 (optional: A2-8) Max. bar diameter: 52 mm (optional: 65, 75, and 91 mm) ) Spindle bore diameter 66 mm Direct drive power 22/30 kW Max. speed 4,000 rpm Tailstock diameter 110 mm/Mk 3 Tailstock travel 850 mm Dimensions (W x D x H) 3.6 x 2.1 x 2.3 m Weight: 5.5 t Standard accessories Coolant system Warning light with 3 colors Work area lighting Central lubrication Programmable tailstock Set of soft jaws Tools and toolbox CE conformity Operating instructions Incl. special accessories Hinged belt chip conveyor Tool measuring arm Oil skimmer Bar feeder interface Video shows DT500

Condition: new, Year of construction: 2025, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Cutting band size [mm] 2520 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg Additionally Hnedpfsudi Uzex Ahueg 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Year of construction: 2022, condition: new, Turntable Load: 1.000kg (1.200kg horizontal) with a center of gravity of 200mm from the faceplate Faceplate diameter: 800mm with 4 T-slots Hodogn Ecrepfx Ahuong Faceplate speed: 0.05-1.5rtm Torque face plate: 1,800Nm Tilt angle: 0-135 ° Welding current transmission: 800A Operation: Two-pedal foot switch and button on the switch cabinet

Condition: new, Year of construction: 2023, HS-440HL CNC lathe TECHNICAL DATA: - FANUC 0i-TF Plus control (5) - spindle servo motor: FANUC 11/15 kW - X-/Z-axis servo motors: FANUC 1.6 kW - max. workpiece/turning diameter fi 450 mm / fi 300 mm - max. turning length 450 mm - X/Z-axis travel: 165 mm / 500 mm - working strokes 5 m/min; high-speed strokes 30 m/min Hsdsiwtk Nopfx Ahuong - spindle speed 45-4500 rpm - Spindle bore / bar diameter: 62 mm / 52 mm - hydraulic turning head fi 200 mm - 12-position hydraulic tool turret - MK4 hydraulic tailstock / tailstock pin travel 130 mm - linear ball guides in all axes - machine dimensions (w x d x h) 3950 x 1552 x 1825 - machine weight 4500 kg STANDARD EQUIPMENT - fully protected working area with cab - 12-place hydraulic tool magazine - 4 hole holders - 8 sets of lathe knife holders - MK4 swivel tip - chip conveyor (belt) with container - automatic lubrication system - Cooling system with reservoir and pumps - heat exchanger electrical box - transformer - tool cassette for basic machine operation - levelling screws and shims (6 sets) - LED signal/work light