CNC Lathe

DOOSAN Puma 2600

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: ML0377-000140, turning length: 1,280 mm, turning diameter: 376 mm, spindle bore: 780 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 22,900 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (min.): 200 rpm, turning diameter over bed slide: 780 mm, type of input current: three-phase, We offer this Doosan PUMA 2600LY II CNC turning and milling center in like-new condition, manufactured in 2020. The machine has not been put into operation and has not been turned on since it was new. Power-on time: 0 Model: PUMA 2600LY II Serial number: ML0377-000140 Supply voltage: 380 V Number of phases: 3 Frequency: 50/60 Hz Rated power: 49.06 kVA Interrupting capacity: 5 kA Current at full load: 74.65 A Short-circuit capacity: 10 kA Circuit diagram version: P210SYH840A07 Weight: 7400 kg Date of manufacture: 2020-11 - Hydraulic chuck 255 mm (10”) – 3-jaw, with a set of soft jaws and a set of hard jaws - Hydraulic unit - Coolant system with a high-pressure pump (min. 7 bar) - Box guideways for all axes – induction hardened - Slant bed (min. 30°) - Work area lighting - Front door safety switch - Leveling pads - Color monitor - Conversational/Graphic programming support - Turret (min. 12 stations) - Tool holder kit: min. 2 straight driven holders; 2 angular driven holders; 8 static holders for drills and boring bars - Full telescopic covers for guideways - Full machine enclosure - Programmable tailstock (MT5 center) - 3-color status light (stack light) - Automatic tool presetter / tool probe - Tool monitoring system - Electrical filter - Bar feeder interface - Automatic parts catcher and parts box - Thermal compensation function Nwedoy Nmdnspfx Agksk - Direct drive spindle - Spindle speed: min. 4000 RPM - Built-in network card (Ethernet) - USB port - Hinged belt-type chip conveyor - Oil skimmer - Toolbox - Radial driven tool holder x2, Axial driven tool holder x2 If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: good (used), Year of construction: 2019, CNC Turning / Millingcenter Machine type: PUMA TT1300SYYB Control: Fanuc 0i-F Year: 2019 Installation: 2024 SPECIFICATIONS Max. turning length: 120 mm Turningdiameter: 175 / 175 mm Travel X-Axis: 135 mm Y-Axis: 80 mm Z-Axis: 530 mm Rapid motion: (X/Y/Z): 30 / 40 m/min. Main Spindle Max. revolution: 6.000 rpm Spindle power: 15 / 11 / 5,5 kW Torque: 116 Nm Bar capacity: 51 mm Subspindle Nwsdpfezizcvjx Agksk Max. revolution: 6.000 rpm Spindle power: 11 / 7,5 / 5,5 kW Torque: 93 Nm Amount of turrets: 2 Tool capacity: 12 + 12 Tool: BMT 45 Driven Tools revolution driven tools: 6.000 Equipment Chip conveyor High pressure pumps: 30 bar 3-jaw chuck: Samchully x 2 mm Oil mist separator Interface barfeeder Partscatcher Parts ejector High pressure pumps: Brinkmann 30 bar inkl. 5 mü Filter Toolholders: 12 Standard- Klemmhalter

Condition: ready for operation (used), Year of construction: 2011, operating hours: 5,477 h, spindle speed (max.): 3,500 rpm, total height: 1,863 mm, overall weight: 6,000 kg, controller manufacturer: FANUC, controller model: I series, number of axes: 3, This 3-axis DOOSAN Puma 2600M was manufactured in 2011. A robust horizontal turning machine featuring a Fanuc I Series control system, it offers a maximum turning diameter of 376 mm and a length of 760 mm. Spindle speed reaches up to 3,500 rpm. Includes chip conveyor, tool holders, and driven tools. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma 2600M machine we have for sale.Contact us for more information. Additional equipment Nwsdpfxozvv Aqs Agkjk • Tool holders • 2+2 driven tools • Automatic tool measurement • Oil catcher • Oil mist filter (Losma) Machine Benefits Technical Machine Benefits • Maximum turning diameter: 376 mm • Maximum turning length: 760 mm • Maximum spindle speed: 3500 rpm Extra Information Machine still under power Dimensions Machine Depth 4600 mm

Condition: good (used), Year of construction: 2012, functionality: fully functional, DOOSAN PUMA 2600S – CNC turning center with subspindle, FANUC, year 2012 We offer for sale a DOOSAN PUMA 2600S CNC turning center with subspindle, equipped with a reliable DOOSAN-FANUC i Series control system. The machine is in operation and can be demonstrated and tested upon request. Technical specifications: Manufacturer: Doosan Infracore Model: PUMA 2600S Nodpfezvhz Ejx Agkowk Year of manufacture: 09/2012 Serial number: ML0218-000034 CNC control: DOOSAN-FANUC i Series Configuration: main spindle + subspindle Max. turning diameter: approx. 376 mm Max. turning length: approx. 760 mm Main spindle chuck: approx. 10" Bar capacity through main spindle: approx. 76 mm Max. main spindle speed: approx. 3,500 rpm Main spindle power: approx. 18.5 / 22 kW X-axis travel: approx. 260 mm Z-axis travel: approx. 830 mm Turret: 12 positions Automatic subspindle for complete part machining Chip conveyor Rated machine power: 40.7 kVA Power supply: 200/220 V, 3 phases, 50/60 Hz Machine weight: 5,400 kg Robust CNC turning center suitable for both series and single-piece production. Thanks to the subspindle, it enables machining of the part from both sides without the need for manual switching between individual operations. The machine is currently powered on and can be demonstrated in operation.

Condition: used, Year of construction: 2022, functionality: fully functional, DOOSAN PUMA GT 3100 M – UNUSED, PRE-OWNED MACHINE WITH ROBOT CELL A Doosan Puma GT 3100 M, manufactured in 04/2022, which has never been used in production after commissioning by the supplier (February 13, 2023). 0 production hours, no workpiece contact, technically and visually in new condition. Includes a factory-installed robot cell for automated loading. Origin: Liquidation of a user's operations in the Nuremberg area. On-site or video call inspection possible. KEY FEATURES - 12″ main spindle, high power and high torque for steel and stainless steel machining - Driven tools VDI40/BMT 65P, milling, drilling and threading from the turret, complete machining in a single setup - Programmable tailstock with servo drive (Z2 axis) - Siemens Sinumerik 828D with 15″ touchscreen and ShopTurn workshop programming - 30° inclined bed, FEM optimized, cast iron - Halter LoadAssistant Universal Big 70 robot cell, mounted and ready for operation (see photos) FACTORY-INSTALLED SPECIAL EQUIPMENT (installed on the machine) Nedpfszi Da Rox Agkjwk - 24-tool turret BMT 65, Hirth gearing (1 s/position) - Automatic tool measuring arm (tool setter) - Tailstock programmable, hydraulic clamping, mount for rotating center - Auto-power-off after program end - Automatic door with servo drive - Three-jaw power chuck Ø 305 mm (12″) with hydraulic draw-in mechanism - 3x Eppinger driven tool holders (drilling/milling head, VDI40/BMT 65) - LNS hinged belt chip conveyor and LNS Turbo HB coolant filtration system - Dormatec ADF oil mist extraction system (filter level 99.97 %, 65 dB) - 20 kVA transformer separately wired - Absolute encoder on all axes HALTER LOADASSISTANT UNIVERSAL BIG 70 (Automation) A Halter robot cell with a Fanuc six-axis robot M-710iC/70 is mounted on the machine (see photos: robot arm with Halter lettering directly on the machine). Cell equipment: - Fanuc robot M-710iC/70, payload up to 70 kg - Workpiece placement via rotary table/loading tray - Workpiece-specific grippers for loading the main spindle - Safety enclosure The cell is designed for this machine and is ready for operation, eliminating the need for additional investment in automation. CONDITION Used machine, unused, no operating hours since installation at the original buyer. Sold "as is", warranty excluded (used machine). Inspection recommended before placing an order. OUR SERVICE On-site or online inspection in the Nuremberg area, transport, installation and commissioning as a separate package upon request, direct German-speaking contact person for spare parts and support, financing possible via leasing/hire-purchase partners, member of the FDM, the German trade association for wholesale trade in machinery and tools. Since this is a single unit, subject to prior sale. Call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: excellent (used), Year of construction: 2022, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 24 station turret, 22KW Motor, Main spindle 4000rpm, sub-spindle 4500rpm, Fanuc I series, 3 jaw chucks, swarf conveyor, tool setter, LNS barfeed unit. Nwodjzt Spnspfx Agkok

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, turning length: 610 mm, turning diameter: 410 mm, spindle motor power: 18 W, spindle speed (min.): 30 rpm, spindle speed (max.): 3,500 rpm, spindle bore: 81 mm, travel distance X-axis: 265 mm, travel distance Z-axis: 680 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, total height: 1,700 mm, total length: 3,500 mm, total width: 1,700 mm, spindle nose: ASA 8, overall weight: 4,900 kg, swing diameter over top slide: 460 mm, spindle diameter: 255 mm, Equipment: documentation/manual, USED ​​3-axis lathe with driven tools and Fanuc 0i-TF CNC Nodezrnl Ajpfx Agkjwk

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, turning length: 330 mm, turning diameter: 350 mm, spindle bore: 65 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 340 mm, spindle motor power: 15 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, total height: 1,700 mm, total length: 3,600 mm, total width: 1,600 mm, Equipment: rotational speed infinitely variable, USED ​​DOOSAN LYNX 2100B 2-axis lathe with Fanuc i-Series CNC Nodpezhaawefx Agkewk

Condition: like new (used), Year of construction: 2020, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 630 mm, turning diameter: 376 mm, spindle motor power: 18 W, spindle speed (min.): 40 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 81 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, bar passage: 81 mm, total height: 2,170 mm, total length: 4,400 mm, total width: 2,100 mm, overall weight: 6,650 kg, spindle diameter: 254 mm, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​6-axis CNC lathe with counter spindle, live tools and Y-axis and FANUC 0i-TF PLUS CNC Nwodpfx Agezrmiajksk

Condition: ready for operation (used), Year of construction: 2018, operating hours: 18,845 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 53 mm, travel distance Z-axis: 830 mm, spindle motor power: 33,000 W, controller manufacturer: SIEMENS, controller model: 828D, number of axes: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018, designed for precision in horizontal turning. Ideal for complex machining tasks, this machine ensures robust performance and durability. If you are looking to get high quality turning capabilities consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for more information. Additional equipment • Mekiload Gantry Loader • Renishaw Equator • Renishaw Equator • Machine includes a rotary indexing magazine • Machine includes a gantry robot Machine Benefits Qualitative Machine Benefits • Tool change time: 1. 0 second • Max speed (station): 5000 rpm • Holder for turning tools: 25 x 25 mm • Holder for boring bar: Ø50 mm • Coolant pump capacity: 1. 5 kw Technical Machine Benefits • Max. Turning diameter over bed: 780 mm • Max. Turning diameter over slide: 630 mm • Max. Turning length: 760 mm • Main spindle torque: 719 nm • Spindle mount (main): a2 #8 • Sub spindle speed: 6000 rpm • Sub spindle power (30 min): 18. 2 kw Nodpfoyr R A Esx Agkswk • Sub spindle torque: 220 nm • Spindle mount (sub): a2 #5 • Number of stations: 24 (12 driven) Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, turning diameter over cross slide: 390 mm, turning length: 550 mm, turning diameter: 350 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 240 mm, travel distance Z-axis: 580 mm, spindle motor power: 18,500 W, total height: 1,755 mm, total length: 3,130 mm, total width: 1,643 mm, feed rate X-axis: 24 m/min, feed rate Z-axis: 30 m/min, type of input current: AC, overall weight: 4,800 kg, swing diameter over bed slide: 550 mm, chuck outer diameter: 203 mm, center width: 668 mm, center height over cross slide: 315 mm, spindle nose: A2-6, bar diameter (max.): 76 mm, controller manufacturer: Fanuc, controller model: Fanuc 21i-TB, Doosan Puma 240C (2012 Model) Heavy-Duty Boxway CNC Lathe Short Overview Available for sale is a production-ready 2012 Doosan Puma 240C CNC Lathe. This machine is a highly reliable shop workhorse featuring a solid, single-piece cast iron bed with traditional box guideways for heavy-duty cutting and superior vibration dampening. Equipped with the factory "C" Big-Bore package, this lathe pairs a large 8-inch chuck capability with a 3-inch through-hole bar capacity, making it an ideal choice for high-mix job shops and mid-sized turning applications. Key Selling Points for Buyers Compact Footprint: Delivers heavy-duty boxway rigidity without taking up excessive floor space. Big-Bore Throughput: Handles up to 3-inch bar stock, matching the material capacities of much larger machine classes. Box Guideway Precision: Offers exceptional tool life and dampening for aggressive roughing cuts on tough alloys. Nwjdpfx Aozluq Esgksk

Condition: good (used), Year of construction: 2016, spindle speed (max.): 3,500 rpm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore: 86mm With jacket tube.:78mm Turret head: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic tailstock: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range: 260mm Z axis movement range: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Nedpfxewtg Ino Agkowk Weight: 6000 kg

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter over cross slide: 630 mm, turning length: 760 mm, turning diameter: 376 mm, spindle bore: 92 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 15 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,163 mm, total length: 3,560 mm, total width: 1,945 mm, turning diameter over bed slide: 780 mm, overall weight: 6,550 kg, bar passage: 81 mm, Equipment: documentation/manual, I am offering a Doosan Puma 2600 SY II CNC lathe, a high-productivity machine equipped with a Y-axis, main spindle, and sub-spindle, ideal for complete machining operations in a single setup. The machine is fitted with a bar feeder and numerous accessories, is fully operational, and can be seen running by appointment. The lathe is in excellent operating condition, regular maintenance has been performed, and it can be demonstrated in idle mode by appointment. Nedpfxoymdt Tj Agkswk Included accessories: . Top Automazioni bar feeder model X-Files S380SX . Chip conveyor . Tool presetting system . Bellegrandi collet chucks on main and sub-spindle . Workpiece pick-off arm with conveyor belt . Static and driven tool holders

Condition: like new (used), Year of construction: 2019, DOOSAN PUMA GT 2100 B LATHE YEAR OF FIRST INSTALLATION: 2019 CHUCK DIAMETER: 250 mm SWING OVER BED: 600 mm SWING OVER CROSS SLIDE: 390 mm Nedpfxozak Dxs Agkewk RECOMMENDED TURNING DIAMETER: 255 mm MAXIMUM TURNING DIAMETER: 390 mm MAXIMUM TURNING LENGTH: 550 mm BAR WORK DIAMETER: 81 mm SPINDLE SPEED: 3,500 RPM SPINDLE NOSE: ASA 8 TURRET: 10 POSITIONS TRAVELS: X: 230 mm Z: 580 mm WEIGHT: 3,600 kg

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: ML0107-000373, Doosan PUMA 2600 L Swing 780mm X-Axis 260 mm Z-Axis 1350 mm Nsdpfx Asxw Ilmsgkewk FANUC i Series Swarf conveyour Renishaw Toolsetter