CNC lathe

DOOSAN Puma 300MC

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm Hjdpfx Aew Rrb Hsb Aet control Siemens Sinumerik 840D max. workpiece diameter 1600 mm max. module 20 mm tip circle diameter 350 mm Milling arbour diameter 375 mm Total closing value 80 kVa weight of the machine ca. 33,5 t dimensions of the machine ca. 10,530 x 6,375 x 4,680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in rpm: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - M 2 motor milling head - Milling mandrels - Oil cooler - Technical documentation

Condition: defective spare-parts repository (used), Table size: 1300 x 950 mm The device is not functional! Hodoicnk Eopfx Ab Ajt Chassis for sale.

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Hedpfortrzdox Ab Aet Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, Year of construction: 1994, functionality: fully functional, - Year of manufacture: 1994 - 1st owner, from own use - Fully functional, powered, ready for demonstration Hsdjxg A S Hopfx Ab Ajt - X-axis travel: 200 mm - Z-axis travel: 1320 mm - Turning diameter: 350 mm - Turning length: 1250 mm - Rapid traverse Z-axis: 15,000 mm/min - Spindle speeds: 25 – 2,500 rpm - Spindle bore: 105 mm - Spindle motor power: 22 kW - Control: Fanuc 0TF - Chip conveyor: Z-type Net price, unloaded ex-location Luckenwalde (Germany), without transport

Condition: used, Year of construction: 2013, Brand : GEMINIS Model : GT5 G2 1200x1000 Manufacture year : 2013 Cnc : SIEMENS 840D-SL Center height: 615 mm Swing over cross slide: 850 mm Swing over bed : 1200 mm Hedpfxezn Axie Ab Aot Main spindle bore diameter: 104 mm Main spindle nose: DIN 55026-11 mm Spindle diameter on front bearing:150 mm Turning Speeds : 0-1400 rpm Spindle Ranges: 4 Headstock power: (S1/S6-60%) 30/37kw – (37/46kw Optional) Headstock torque: (S1/S6-60%) 4000/4850 Nm (4800/5950Nm) Guide width: 655 mm Height up to the plane guide: 800 mm

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, turning length: 650 mm, turning diameter: 355 mm, spindle speed (max.): 3,500 rpm, spindle nose: A2-8, Equipment: documentation/manual, Machine with tailstock. CNC FANUC 21T Year 1998 Capacity Turning Ø: 355 mm Turning length: 650 mm Spindle: Hsdjzp Hh Dopfx Ab Ast Spindle nose: A2-8 ASA Spindle speed: 3500 rpm Motor power: 18.5 Kw Turret: Tool Stations: 10 Tailstock: Cone: 5 CM

Condition: used, Technical details: capacity at 100% ED: 400 A capacity: 60% ED = 500 A welding current: Gleichstrom V weight of the machine approx.: 230 kg capacity: 21 kVA Welding rectifier MIG / MAG Cooling type F Protection class IP 23 insulation class F incl. wire feed device, feed rate 0,5 - 20 m/min Ground cable/pliers Hose package 4 meters new Hodpfxou Nwc Hj Ab Ast *

Condition: excellent (used), Year of construction: 2010, Capacity Swing over bed 750mm / 29.5" Swing over carriage 480mm / 18.9" Max. Turning diameter 750mm / 29.5" Max. Turning length 3935mm / 155" Distance between centres 4000mm / 157.5" Max. load between centres 3000kg Max. load by chucking 750kg Spindle Spindle speeds 3-1000rpm spindle speed range manual 2 steps Spindle nose type A2-11 Spindle bore 6.9mm / 6.9" Spindle taper MT6 Carriage Max travel X axis 425mm / 16.7" Max travel Z axis 3935mm / 155" Rapid traverse X axis 3m/min / 120ipm Rapid traverse Z axis 6m/min / 236ipm Ball screw (diameter x pitch) X axis 32 x 5 mm Z axis 50 x 10mm Cross side width 260mm / 10.2" Turret tool post Curvic type H-4 (Manual) Number of tool positions 4 Tool site 32 x 32mm (1.25 x 1.25") Tailstock Taper in tailstock spindle MT6 Tailstock quill stroke 200mm / 7.9" Hedpfx Abozfac Ts Ajt Tailstock quill diameter 112mm / 4.4" Motor Main spindle motor AC18.5/15kw (25/20HP) X axis servo motor AC1.0 kW (1.3HP) Z axis servo motor AC2.9KW (3.8HP) Lubricant pump motor for headstock 0.2kW coolant pump motor 0.18kW Lubricant pump motor for apron 0.025kW

Condition: new, functionality: fully functional, machine/vehicle number: 314567.00, number of clamping sleeves: 1, mount diameter: 30 mm, clamping range: 30 mm, Collets / Collet caps / Support sleeve – Collet assembly new – unused Hjdpfxewccp Ho Ab Ast Our asking price is net, ex works, plus packaging costs, starting at €390. 5 collet caps for collets, size Ø30, item no. 314567.00, €390 per piece. 4 collets, size Ø30.0, €580 per piece. 1 support sleeve for collets, size Ø30, €420. - e.g. for Reishauer RZ 301 / RZ 362, available from our stock. All technical data is subject to printing errors and changes. We only sell to countries within the European Union.

Condition: used, Daewoo Puma 12S-3A CNC Turning Centre Year: 1996 Fanuc Series O-T CNC Control C-Axis Spindle Live Tooling 12 Station Servo Turret Hydraulic Chuck Swing Over Bed: 570 mm Maximum Turning Diameter: 430 mm Maximum Turning Length: 770 mm Serial Number 3P100044 90 mm Bar Capacity 91 mm Spindle Bore A2-8 Spindle Nose Spindle Speeds: 25–3,000 rpm 18.5/22 kW AC Spindle Motor X Axis Travel: 260 mm Z Axis Travel: 800 mm Rapid Traverse: X 20 m/min, Z 24 m/min Automatic Lubrication Coolant System Swarf Conveyor Hjdpfx Aezrt Dwsb Ajt Fully Enclosed Splash Guarding