Guided guillotine shears with pneu. BH

DURMA VS 3006 Kulissengeführt

Condition: excellent (used), Year of construction: 2012, Trumpf Trushear 5063 (2012) Guillotine Shear 3050x6mm Manufacturer: Trumpf Model: TruShear 5063 Year of manufacture: 2012 Condition: used, very good Control: ELGO P50 Cutting length: 3050 mm Sheet thickness: 6 mm / 4 mm for stainless steel Cutting angle: 0.5 – 2.8° Blade gap adjustment: 0.05 – 0.72 mm Automatic cutting angle adjustment Automatic blade gap adjustment Automatic blade gap compensation Hold-down devices: 20 pieces Strokes per minute: 18 – 38 Backgauge: 10-1000 mm, adjustable Total power requirement: 11 kW Oil capacity: 140 L Dimensions (approx.): L 4.00 x W 1.67 x H 1.90 m Total weight: approx. 7.2 t Customs tariff number: 84615090 Sheet support device Hsdpexrv Apefx Afpek Sheet return device Small parts chute 3x support arms Light barrier Foot pedal Documentation

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Stop depth: 5-1,000 mm Working height: 800 mm Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame overhang: 100 mm Tank capacity: 150 l Hjdpfx Afsv Tk Exepek

Condition: new, Year of construction: 2025, Delivery ex works Turkey Bending length (A): 3050 mm Press force: 170 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 2550 mm Forward speed: 130 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil tank capacity: 180 liters Main motor power: 11 kW Stroke length (C): 265 mm Installation height (D): 450 mm Projection stand (E): 410 mm Table height (F): 870 mm Table width (G): 170 mm Length (L): 4200 mm Height (H): 2800 mm Width (W): 2200 mm Weight: approx. 7500 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X) expandable with optional R+Z-Axis Eurostamp 2067 lower tool (V: 50, 35, 22, 16) Hsdpfxogu N Als Afpek Eurostamp 1260 upper tool 85 ° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X: 750 mm) Adjustable backgauge fingers Inch and metric system can be selected Ground and chrome-plated cylinders Swiveling control panel Foot control with anti-panic stop & emergency shutdown Lateral protective grille (secured with limit switch) Light curtain on the back of the machine (900 mm) DSP laser finger protection system at the front (CE) BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump Slidable front support arms (2 pieces) Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Painting: RAL 7035, RAL 5015 Optional special accessories available at an additional cost: -CNC-controlled R-axis (250 mm) -CNC motorized crowning -Servo driven motors backgauge system for X + R axis (Mitsubishi) -Painting in special colors on customer request Documentation in German or English CE conformity

Condition: new, Year of construction: 2025, sheet thickness steel (max.): 6 mm, cutting length (max.): 3,050 mm, Guillotine shears: Available immediately! General performance features: Cutting length: 3100 mm Maximum sheet thickness: 6 mm (mild steel), 4 mm (stainless steel) Projection in the side stand: 50 mm Number of strokes: 15 per minute Cutting angle: 1° Number of hold-down devices: 16 Hold-down pressure: 14 tons Backgauge: Up to 1000 mm Backgauge speed: 200 mm/s Motor power: 15 kW Oil tank volume: 200 liters Support arms: 2 pieces Table dimensions: 865 mm (height) x 500 mm (width) x 3515 mm (length) Dimensions and weight: Length: 4110 mm Hjdpfsrx Sydsx Afpok Width: 2200 mm Total width (with support arm and rear protective grille): 3700 mm Height: 2100 mm Weight: 7650 kg This guillotine shear is the ideal addition to your workshop, taking efficiency and precision to the next level. Get this high-quality machine for demanding metalworking projects. Contact us now for more information and a personalized quote!

Condition: used, Year of construction: 2019, total length: 5,100 mm, total width: 2,300 mm, total height: 2,400 mm, Weight: 10.470 kg With Pneumatic sheet-support - Year: 2019 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 6922191908 - Drive system: CNC Hjdpfow E H Sqsx Afpsk - Control system brand: Cybelec - Control system type: D-Touch-7 - Drive type: Hydraulic - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 4100 - Backgauge depth [mm]: 1000 - Transport dimensions: 5100mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 10470kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2024, 3050 mm 06,5 mm 0,5-2,5 ° Hjdpfswp Tfrex Afpok 1000 mm

Condition: used, Max. cutting length: 3,000 mm Max. sheet thickness: 6 mm steel Motorized backgauge with digital display up to 1000 mm Side stops and table extensions cutting length limitation Cutting edge lighting Hydraulic shear angle adjustment Hjdpfx Asvmz Nbefpek knife sharpened Weight: approx. 6500 kg

Condition: new, HGL is Baykal’s economical and efficient swing-beam shearing machine, designed for light to medium-duty sheet metal cutting. It offers a cost-effective solution for fabricators who need accurate, clean cuts without the complexity or cost of high-end shears. The HGL is particularly suitable for small workshops, maintenance departments, and entry-level metal fabrication operations. Hjdpownal Ajfx Afpjk