Pellet press

Ecokraft Pelletpresse und Absackanlage

Condition: new, Year of construction: 2022, Metal lathe 400V, fabr. ZMM - type C400TM/1000 The construction and design of this machine meet today's requirements for efficiency and ergonomics. The production technology, the adaptation of high-quality materials and standardized components from reputable and globally proven manufacturers, as well as continuous inspection, meet even the most demanding customer requirements. The machine is characterized by high technological, functional and operational performance, reliability and safety. Naturally, this machine complies with current European safety standards. Features of this lathe General: European top quality lathe The machine is equipped with automatic power supply Equipped with digital readout X-Y axis Bed: Heavy, strongly ribbed and rigid bed casting made of strong gray cast iron that prevents vibrations when the machine is properly leveled and operated. Double prismatic, inductively hardened and precision ground guideways Built-in gap bridge that can be removed for handling large workpieces. Headstock: The stable, well-ribbed and precision-machined headstock ensures non-vibrating and accurate operation while the lathe is processing parts at high speed or during heavy machining regime. The ground gears are made of induction-hardened hardened steel and operate in an oil bath. The spindle is hardened, precision ground and balanced; it has a standard version of the hole and spindle face, including Cam lock performance, direct mounting of 3-jaw self-centering, 4-jaw independent chucks, chucks without chucks or mounting of the chucks with flange connector. The spindle bearings can use bearings from SKF, FAG, NSK with preload for mounting the bearing set. This bearing ensures high accuracy of machine work indefinitely. Lathe apron: Mechanized transverse and longitudinal movements. A built-in safety mechanism against overloading. A latch against simultaneous switching of the nut to spindle and automatic feed. Fast movements in both axes. Feed gearbox: When processing a particular part, the feed gearbox offers different feeds and steps for thread cutting - metric, inch, module and DP threads. It is designed so that operation is extremely convenient. Specifications Learn More Product Type-Turner Brand-ZMM Voltage-400V Center height-200 mm Turning diameter over bed-400 mm Turning diameter over support-235 mm Turning diameter over pocket-550 mm Bed width-320 mm Main spindle clearance-52 mm Distance between centers-750 - 1000 - 1500 Main spindle internal/external thread DIN 55027 - gr.6 Spindle speeds-50 - 2240 Motor power- [kW]4 kW Number of feeds-80 Feed range longitudinal-0.015 - 0.6 mm/rev Feed range cross-0,0075 - 0,3 mm/rev Number of thread cuts-40 Thread cutting metric-0,25 - 7,5 mm Whitworth thread-cutting-120 - 4 TPI Thread-cutting module-0,0625 - 1,875 module Thread cutting pitch-480 - 16 dP Nodpfoiy Nq Hex Ab Iokt Transverse displacement support-235 mm Chisel displacement support-110 mm Pinole diameter-100 mm Loose head-MK 4 Weight-1700 kg Price is ex VAT!

Condition: used, Year of construction: 2014, Empty weight: 4.000 kg Price: On request - Machine available from: 2026-01-26 - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 89867 - Number of milling spindles [pcs.]: 1 - Type milling table: Flat table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - Saw unit present: Yes - Tool changer positions [pcs.]: 12 Njdpfjxr Evlsx Ab Iokt - System/software: BiesseWorks - Safety feature: Safety mat - CNC options: Label machine, Loading system, Unloading system - Table length [mm]: 3600 - Table width [mm]: 1800 - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 30000452, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, quill travel distance: 60 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, table length: 600 mm, table width: 210 mm, overall weight: 710 kg, table load: 200 kg, Equipment: documentation/manual, DECKEL FP1 – completely overhauled in 2012 by FPS (Germany), equipped with Heidenhain digital display, tool cabinet with accessories, and dividing head. Since the overhaul, the machine has seen very light use and is therefore in like-new condition. About FPS: Specialized in the complete refurbishment of DECKEL machines. MANUFACTURER: DECKEL MODEL: FP1 CONDITION: Overhauled (2012) – mechanically and electronically as new! LOCATION: Graz (Austria) IMAGES/VIDEOS: For additional photographs and videos of the machine in operation, please contact us. Nksdpfx Aoxywhcjb Iet Description: This high-quality DECKEL FP1 milling machine has been completely refurbished, with both mechanical and electrical components upgraded to the latest standards. A new CE-compliant control cabinet was installed in accordance with current statutory requirements (BGVA 3 / DIN-EN 60204-1, new machinery standard). During the overhaul, the control system, drive package, and drive motors were all replaced and brought up to date. The modernization also included the installation of a new, touch-safe control panel and new motor. Technical data: Operation: manual, with option for automatic positioning Control: 3-axis Heidenhain digital readout Spindle speed range: 40 – 2000 rpm (geometrically stepped, 16 speed stages) Feed rate: 10 – 500 mm/min (stepless adjustment) Rapid traverse: 1.2 m/min (stepless adjustment) Quill: Vertical & horizontal extension 60 mm, SK40 Travel (X/Y/Z): 300 / 150 / 340 mm Table size: 600 × 210 mm Table load: max. 200 kg Machine weight: 710 kg incl. angle table and milling head Footprint: 1600 x 1400 x 1750 mm (W / D / H) Equipment: Vertical and horizontal spindle Milling head manually swivels ± 90° Completely new electrics and drive packages Overhauled – mechanically and electronically as new Extras: Z-axis bellows Special paintwork Highlights: Heidenhain digital readout for precise operation During overhaul, entire control system, drive package, and drive motors were renewed Contact us to arrange a viewing appointment.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 41,000 h, functionality: fully functional, turning diameter over cross slide: 400 mm, spindle bore: 66 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 600 mm, Equipment: documentation/manual, rotational speed infinitely variable, 2-axis CNC lathe in perfect working order Year 2001 and maintained. Very reliable machine (in 20 years, spindle and clamping pot have been rebuilt once and hydraulic accumulator) HEIDENHAIN Turn Plus IT CNC (conversational and ISO) 12-station VDI 30 turrets Very precise and rigid, suitable for quality 5 (Heidenhain scale on the X axis) Chip conveyor Part catcher arm, diameter 66, length 100 Hydraulic counterspindle (pedal) 400/400V isolation transformer 210mm hydraulic Autoblock chuck with pressure compensator (for clamping thin parts) 66mm spindle bore Pre-equipped bar feeder 41,000 operating hours (see hour meter) All original documentation and invoices (few). Nodpfx Aswb Eqdsb Iekt

Condition: used, Year of construction: 2010, turning diameter 370 mm turning length 424 mm Nedpfx Abexzk Rte Ijkt control Fanuc

Condition: reconditioned (used), functionality: fully functional, Veneering press line for wood, consisting of the following machines: - OSAMA S2R glue spreader - 1300 mm - NEW MACHINE - Loader from glue spreader onto conveyor - Infeed conveyor, length 6000 mm x width 950 mm, motorized - ORMA hydraulic flat press 5100x1400 mm – 12 cylinders, hot water heating plates, refurbished - Outfeed conveyor, length 6000 mm x width 950 mm, motorized This press requires medium to high pressure to ensure the panels are 100% flat. Nkjdjvva Syjpfx Ab Ist Panel size: 5100 x 1400 mm (solid drilled steel plates) Daylight opening: 180 mm Full surface pressure: up to 10 kg/cm² Number of hydraulic cylinders: 12 units – cylinder diameter 140 mm MYLAR Teflon film on the plates Preparation for hot water plate heating – boiler not included Machine dimensions: 2300 x 5100 mm x height 2500 mm The machine is fully refurbished, calibrated, and tested. Price: €55,000 excl. VAT, without OSAMA glue spreader Price: €62,000 excl. VAT, including OSAMA glue spreader

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Labeling stations Barbaric Labeling LPS, year of manufacture 2021 each with Godex EZ235I label printer Belt feed table, suitable for automated warehouses or panel saws Nkjdpfoxy Afasx Ab Ijt

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, cutting height (max.): 160 mm, cutting width (max.): 230 mm, feed rate X-axis: 36 m/min, total width: 1,860 mm, total length: 3,500 mm, total height: 1,830 mm, number of planer blades: 4, power: 47.25 kW (64.24 HP), Offered for sale is a high-performance four-sided planer moulder manufactured by JKS & Trade Moravia s.r.o., model QMB623W – MBQ623W, purchased new in 2021. The machine has seen minimal use only for 2 years, as it was originally acquired for a production project that was not implemented. Technical Specifications: Working width: 18–230 mm Working thickness: 10–160 mm Feed speed: 7–36 m/min (adjustable) Tool diameter: 125 mm (max) Power supply: 400V / 50Hz / 3-phase Installed power: 47.25 kW Main fuse: 100 A Machine dimensions: 3500 × 1860 × 1830 mm Weight: 6,000 kg CE compliant The machine is fully operational, regularly maintained, and comes with original documentation, including the operator manual. Suitable for precise and efficient four-side profiling of solid wood components. 📍 Location: Czech Republic The machine is available for immediate inspection and dispatch. 📩 Please contact us for pricing, detailed photos, or to arrange a viewing. Nsdpfxsxup Ece Ab Ijkt