Eccentric Press - Single Column

EDELHOFF AZR/H3/100

Condition: used, Year of construction: 1997, Pressure capacity 1,300 kN Bkxqen9Lkw7 Adjustable stroke 20 - 130 mm Stroke rate 20 - 120 1/min. further data and pictures on request the press is mechanically and electrically overhauled

Year of construction: 1980, Condition: used, pressure 100 t distance between columns - mm stroke 350 mm table size 1150 x 700 mm total power requirement 11 kW weight of the machine ca. t dimensions of the machine ca. m - cutting impact dampening - die cushion - without electrical cabinet Rqnu0Hop

Condition: good (used), Year of construction: 1989, Throat depth: 400 mm, Ram adjustment: 120 mm, Total height: 3,400 mm, Table width: 800 mm, Table length: 1,600 mm, Total width: 1,600 mm, Total length: 2,200 mm, Overall weight: 12,000 kg, Table height above floor: 760 mm, electro-pneum. Stroke adjustment, ram adjustment with motor, lockable counter-clockwise rotation switch, ram weight compensation, electric stroke counter, central lubrication with motor, vibration damper, additional table and ram plate Bxsqyn8Cuy

Condition: good (used), Year of construction: 2003, FUNCTIONAL, GOOD U2Blivhxv9

Fuel type: electric, Color: white, Year of construction: 2021, Condition: used, Year of construction: 2021 Bei7Z8U New: Yes Model year: 2021 Intended use: Construction Usable material: Concrete CE marking: yes Damage: none

Condition: refurbished (used), Year of construction: 2005, Functionality: fully functional, Load capacity: 100 kg, Arm reach: 2,400 mm, Controller manufacturer: Kuka, Controller model: KRC-2 Edition 05, Equipment: Documentation/Manual, Kuka KR 100 comp industrial robot Bei7Xa3 - refurbished and completely tested indutrial robot - we can offer you a 6 month component guarantee separatly - building year 2005 - control system Kuka KRC-2 Ed.05 (Windows control) - payload 100 kg - working range 2400mm - complete with cable set and teach panel - very good condition - test under power is possible - if you need more robots or other models, please contact us. - we have always many robots in stock We can offer you the complete installation of the robot into your production. Please contact us if you need more or other robots. We always have many robots of different manufacturers in our stock. We can teach your staff to programm robots from Kuka, ABB or Fanuc.

Condition: good (used), - Type - FMF 100 - Double-sided drilling machine - Min. diameter: 3 mm - Max. Diameter: 300 mm - Speed: 110 - 4600 n-1 rpm - Lower drill bit automatic feed, upper drill bit is guided by hand Fzjgjqw - Special price 1.500 €

Year of construction: 2024, Condition: as good as new (ex-display), -usable internal dimensions: D=970mm H=540mm (other sizes on request) Mthcajz9 -touch screen -injection pressure: 3 bar -basket load: 200kg -Tank volume: 210L -Standard accessories: - Oil skimmer - Frame, cover and housing made of stainless steel - Time-controlled electric steam extraction - Reinforced basket in stainless steel - Stainless steel electric pump - Stainless steel filter on the suction side of the pump - Stainless steel heating elements - Mechanical basket rotation with gear motor - Electrical system IP 65, control via SPS (DGT V4) - Automatic water supply - Safety limit switch monitors the cover opening - Spray nozzles in stainless steel - Weekly timer for heating and oil separator - Operating hours counter

Condition: reconditioned (used), Year of construction: 1976, Year of last overhaul: 2011, LOCATION: WUPPERTAL without control, machine is dismantled and stored E2Psndu 1 automatic punching press, make: Edelhoff, type: DARRW500, year of manufacture: 1976 overhauled in 2011, press force 5,000 kN, table area 2,000 x 1,300 mm, ram area 2,000 x 1,300 mm, max. installation height 650 mm, stroke adjustment 20 - 200 mm, ram adjustment 150 mm, lateral passage 1,000 mm, weight 55 t. This item is part of an industrial auction. Reference number: 24-1024-1

Condition: excellent (used), Turning heart diameter 100 mm length 380 mm width 160 mm thickness 32 mm Czxoloqc weight 4 kg other sizes on request

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, CNC NESTING CENTER "SCHREINERTRAUM" with HORIZONTAL DRILLING DIRECTLY IN THE NEST! THE FULL PRODUCTION PROGRAM WITH MOBYLIFT PANEL LOADER AND ALL THE TOOLS YOU NEED TO START PRODUCTION IMMEDIATELY! Working range: X-axis 3,086 mm Y-axis 2,185 mm Z-axis 150 mm Work table: Multifunctional table made of aluminum Stops for "A" worktable: 4 pcs. Stops for "D" worktable: 4 pcs. Pendulum table design: Allows machining on one side side, while occupying the other side 2 vacuum pumps 250 cbm/h each Vacuum for half or full work table Drilling unit F18L: 12 vertical drilling spindles vertical Spindle pitch 32 mm 2+2 horizontal drilling spindles in X 1+1 horizontal drilling spindles in Y 1 grooving saw unit diam. 125 mm fixed in X Milling spindle 9.5 KW HSK 63F Speed 1,500 - 24,000 rpm Right / left rotation Blow nozzle system on milling spindle for tool cooling during machining during machining Beixsby Interpolating vector axis for autonomous positioning of angular gears in the milling spindle (0-360 degrees in X/Y plane) Lateral tool magazine for automatic tool change in the milling spindle 13 tool slots for tools and angular gears with max. total length 160 mm Lateral PICK-UP tool changer for tools max. diameter 160 mm Further equipment: - Automatic central lubrication - Sensor for automatic tool length measurement - Additional hardware key for Maestro CNC (for USB slot) - Slide for the panel outfeed on the left-hand side attached to the machine portal, incl. suction device - Label printer - Clamex unit - Milling arbor for CLAMEX P - Adapter unit for CLAMEX Control unit: Control panel "eye-M" 2018 Xilog Maestro machine interface Rectangular nesting module for Xilog Hardware key for Xilog Nesting (for USB slot) "TECPAD wired" remote control with 7" touchscreen SOFTWARE: MULTICENTER ST-PAKET consisting of: Nesting the parts from the panel. This includes Milling cut-outs for horizontal holes are taken into account incl. horizontal drilling unit (1-spindle) for milling spindle/ vector axis CAD Line Software Multi Center Studio (MCS) is a software for nesting and optimizing existing Maestro programs CAD Line Software man. Printer license for use Label printing CAD Line Software CLAMEX - Processing of special connections as an extension for MCS CAD Line Mulit Center - Studio "material-dependent milling strategies": A strategy can be assigned to each material in the panel store. MCS then controls the cutting out parts automatically according to the material or a stored strategy ST license horizontal drilling System complete with existing tool set and HSK 63F tool holders Mobile battery-operated vacuum lifter "MOBYLIFT" TC-120 AM-SL Lifting height 0 - 160 cm Tilt angle front rear 100 degrees Swivel angle head joint 90 degrees on both sides

Condition: excellent (used), Catalog number 7385 TECHNICAL SPECIFICATIONS - track width 300mm - shaft width 200mm - max cutting height 100mm - max blade diameter 300mm - disc bore diameter 70mm top: - 3 rows of ratchets Brsc2Rgrgq - smooth pressing, sliding shaft - shaft with saws - smooth pressure, slipping shaft from below: - slip roller - guide - pawls - track - 2 types of feed speed + smooth - main motor n22kW - feed motor 1kW - central lubrication - dimension of worktop length / width 1430x700mm - diameter of the suction nozzle 150mm - dimensions L/W/H 2300x1450x1750mm, weight 1550kg - made in Italy - very good condition - used multi-saw Net price: 25900 PLN Net price: 5886 EUR depending on the price 4,4 EUR (Prices may vary with higher fluctuations)

Year of construction: 1995, Condition: ready for operation (used), General Data Machine weight 9500 Main Drive Pressing force 800 kn Stroke 30-200 stokes/min Stroke adjustment Yes Table Outer length 810 mm Outer width 860 mm This EDELHOFF DARR 1/80 press was manufactured in 1995. It offers a pressing force of 800 kN with adjustable strokes ranging from 20-80mm and stroke rates from 30-200 per minute. The machine features a substantial table surface of 810x860mm and a maximum distance between table and ram of 450mm. It weighs 9.5 tonnes, suited for robust operations in sheet metal machinery. The EDELHOFF DARR 1/80 machine we have for sale. For more information about this press, please reach out to us. Application Types Dpsgzh Broaching

Year of construction: 2024, Condition: as good as new (ex-display), -usable internal dimensions: D=970mm H=540mm (other sizes on request) -injection pressure: 3 bar -basket load: 200kg -Tank volume: 210L -Standard accessories: - Oil skimmer - Frame, cover and housing made of stainless steel - Time-controlled electric steam extraction - Reinforced basket in stainless steel - Stainless steel electric pump - Stainless steel filter on the suction side of the pump - Stainless steel heating elements - Mechanical basket rotation with gear motor - Electrical system IP 65, control via SPS (DGT V4) - Automatic water supply - Safety limit switch monitors the cover opening - Spray nozzles in stainless steel - Weekly timer for heating and oil separator - Operating hours counter Bm7Ttlwugp

Condition: new, Hot-dip galvanized pallet racking for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 100.16 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 037 x upright approx. 450 cm x 110 cm, pre-assembled. - 144 x crossbar approx. 270 x 14 x 5 cm, T30. - 288 x locking pins. - 288 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 19.900 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : C93Aljm Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: used, Vertical shock head Stroke 100 mm RADIUS 270 mm Mounting surface: Width above 155 mm Waist width 215 mm 345 mm Bolt circle diameter 217 mm M9Eaf Center hole diameter 155 mm Hole spacing above 110 mm

Condition: excellent (used), Functionality: fully functional, Heavy-duty cutting mills Dpqaet Manufacturer: Herbold AMIS Type: SM 60/100 7-2 Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm wide Rotor blades: 7 Stator blades: 2 plus blade set: 2 Blade setting table

Condition: excellent (used), Catalog number 7384 TECHNICAL SPECIFICATIONS - track width 260mm - shaft width 230mm - shaft diameter 60mm - max cutting height 100mm - max blade diameter 350mm (assumed 300mm) 300mm top: - 2 rows of ratchets - smooth pressing, sliding shaft - shaft with saws - 2 smooth pressure, slip shafts from below: - guide - ratchets, track Brr8Gq0Uu8 - 2 types of feed speed + smooth - main motor 15kW - feed motor 0.8kW - central lubrication - worktop dimension L/W 1420x670mm - dimensions L/W/H 1800x1400x1700mm, weight about 1500kg ATTRIBUTES - made in Italy - used multi-saw, very good condition Net price: 27900 PLN Net price: 6340EUR depending on the price 4.4 EUR (Prices may vary with higher fluctuations)

Year of construction: 1995, Condition: ready for operation (used), A Gebrüder Edelhoff punching machine is available. Pressing force: 80t, stroke adjustment: 20mm-80mm, ram adjustment: 100mm, stroke rate: 30-200/min, motor power: 15kW, weight: approx. 9500kg. Including reel AMT CA 300/R7-60. The machine occasionally has a problem with the speed, as it increases by itself. This is probably due to the wiring harness. An on-site inspection is possible. Dpsfkb

Year of construction: 2024, Condition: new, Fuel type: electric, Workshop loader for stationary and traction batteries Use - Adjustable unit for electroplating and electrochemistry - Service use in stationary applications (in case of defect of the charger) - Formation of new batteries - Possibility of charging batteries with IU or IUa Characteristics - Regeneration (desulphation, equalization charge) of batteries of any type Adjustability, operation - Manual setting of parameters on the front panel - Wide range of settings: 0 - Imax, 0 - Umax (depending on the type) - Possibility to switch off the device automatically after the the set time - Possibility of automatic switch-off of the device after delivery of the set Ah - Possibility of operation without time limit - possibility of external operation (switching on and off) - possibility of external signaling (optical, potential-free) Engewpz The assortment of device types is very wide. If you send us your requirement profile you will receive your special offer. For further information we are of course at your disposal

Condition: excellent (used), Year of construction: 2006, Operating hours: 2,000 h, Frequency: 50 Hz, Fuel: diesel, for sale we have a used generating set with Perkins engine in very good condition, silenced. Technical data: Manufacturer : FG Wilson Model : P100-2 Engine : Perkins 6 cylinder turbo diesel water cooled . Power : 100 KVA / 80 kW RPM : 1500 rpm Frequency : 50 Hz Voltage : 230/400 Volt Operating hours : approx. 2000 hours Year of construction : 2006 The generator is brand new 2024 installed with one year warranty. - Incl. control unit 2Wcnikwk - Incl. batteries - Incl. silencer - Incl. circuit breaker - Incl. sockets - Location : 24229 Dänischenhagen - Delivery against surcharge is possible.

Year of construction: 1984, Condition: refurbished (used), PRESSURE 200t Iwfom3V TABLE UP/DOWN 1130x860mm STROKE 250mm DAYLIGHT 500mm

Condition: as good as new (ex-display), Year of construction: 2014, Operating hours: 32,000 h, Functionality: fully functional, Screw diameter: 60 mm, Injection pressure: 2,000 bar, Displacement volume: 678 cm³, - Type : 570 A 2000 - 1300 - Nombre d'heure / Working hours : 32000 - Diamètre de vis / Screw diameter : 60 mm - Volume injectable/ Shot volume : 678 cm3 - Pression d'injection / Injection pressure : 2000 BAR - Passage entre colonne / Bettween tie bar : 570 x 570 mm - Noyaux / Corepulling : 2 Sgjl00Q3Gj - Robot interface : Yes

Condition: excellent (used), Catalog number 7317 TECHNICAL SPECIFICATIONS - track width 300mm - shaft width 300mm - max cutting height 100mm - max blade diameter 300mm Nku0Inp - disc bore diameter 70mm top: - 2 rows of ratchets - smooth pressure roller, slipping - pressure - shaft with saws - 2 smooth pressure, sliding shafts bottom: - guide - pawls - caterpillar - 2 types of feed speed + smooth - main motor 22kW - feed motor 2,2kW - central lubrication - worktop dimension L/W 1750x690mm - insert for short elements - diameter of the suction nozzle 2x150mm - dimensions L/W/H 2280x1800x1500mm - weight 1795kg - made in Italy - used multi-saw, very good condition Net price: 32900 PLN Net price: 7477 EUR depending on the price 4.4 EUR (Prices may change with higher fluctuations)

Condition: new, Functionality: fully functional, - Offer number: 100/116 - Filter for Nilfisk Attix 200 H Zone - Manufacturer: Nilfisk CFM - Type: Z8 17264 H 14 Zone - Capacity : 1200 m³/h - Dimensions: AU 410 x 400 mm - Weight: 5 kg Buonfrqtcc - optical condition according to photos - New OVP - functional - Shipping Germany-wide 8,90€ Notes: The goods offered here usually come from company liquidations and bankruptcies. Due to missing type plates, it is not always possible to provide exact item data. The item pictures are original photos that show the actual condition of the item. If several identical items are offered, only one of the items will be photographed. There may be slight variations in the condition of the individual items. If an item is opened or repaired/rebuilt by the buyer, any warranty claim will be void. This also applies if repairs and modifications are carried out by third parties without prior agreement. Company names and trademarks used are the property of their owners. They serve exclusively to identify and describe the goods.