EMCO VMC 300EMCO
VMC 300
Machine data
- Machine type:
- EMCO VMC 300
- Manufacturer:
- EMCO
- Model:
- VMC 300
- Year of construction:
- 2003
- Condition:
- ready for operation (used)
Price & Location
- Location:
- , Austria
Technical details
- Travel distance X-axis:
- 420 mm
- Travel distance Y-axis:
- 330 mm
- Travel distance Z-axis:
- 240 mm
- Controller manufacturer:
- SIEMENS
- Controller model:
- SINUMERIK 810D
- Workpiece height (max.):
- 190 mm
- Total height:
- 2,450 mm
- Total width:
- 2,400 mm
- Table width:
- 325 mm
- Table length:
- 850 mm
- Table load:
- 150 kg
- Overall weight:
- 2,900 kg
- Spindle speed (max.):
- 5,000 rpm
- Spindle motor power:
- 9,000 W
- Number of slots in tool magazine:
- 12
- Tool weight:
- 5,000 g
- Positioning accuracy:
- 0.004 mm
- Product length (max.):
- 2,300 mm
- Number of axes:
- 3
Details about the offer
- Listing ID:
- A209-97307
- Reference number:
- AT-MIL-EMC-2003-00001
- Update:
- 16.07.2026
Description
• 2x units available (one newer and one older) with different Control Brands
• Distance from Spindle Nose to Table: 210 – 450 mm
• Number of T-Slots: 3
• T-Slot Width: 14 mm
• T-Slot Spacing: 100 mm
• Spindle Bearing Diameter: Ø60 mm
• Bearing Type: Angular Contact Ball Bearing
• Tool Taper: SK40 (DIN 69871 / ISO 7388-I)
• Pull Stud: M16 (DIN 69872 / ISO 7388-II)
• Automatic Tool Clamping
• Tool Clamping Force: 6,000 N
• Spindle Overhang: 330 mm
• Spindle Motor Power: 9 / 11 kW (100% / 60% Duty Cycle)
• Optional Spindle Speed: 0 – 8,000 rpm
• Maximum Torque: 100 Nm (5,000 rpm) / 78 Nm (8,000 rpm Option)
• Noise Level: 72 dB(A) at 5,000 rpm
• Milling Capacity in Steel (16MnCr5 – 790 N/mm²): 220 cm³/min
• Maximum Drilling Capacity in Steel: Ø25 mm
• Maximum Tapping Capacity in Steel: M20
• AC Servo Drives with Ball Screw Spindles
• Feed Rate (X/Y/Z): 0.01 – 12,000 mm/min
• Rapid Traverse (X/Y/Z): 12 m/min
• Feed Force X/Y: 6,000 N
• Feed Force Z: 8,800 N
• Resolution: 0.001 mm
• Tool Carrier: Drum Type with Direction Logic
• Automatic Tool Changer
• Maximum Total Tool Weight in Magazine: 36 kg
• Maximum Tool Diameter: 100 mm
• Maximum Tool Length: 220 mm
• Tool Change Time: T1: 5.8 s / T2: 3.9 s / T3: 3.9 s
• Chip-to-Chip Time (VDI 2852): T1: 8.9 s / T2: 7.0 s / T3: 7.0 s
• Coolant Tank Capacity: 100 L
• Coolant Pump Flow Rate: 10 L/min
• Maximum Coolant Pressure: 3.7 bar
• Coolant Supply: 4 External Nozzles
• Automatic Central Lubrication for Guideways and Ball Screw Spindles
• Grease Lubricated Main Spindle Bearings
• Power Supply: 3/PE ~ 400 V / 50–60 Hz
• Maximum Voltage Fluctuation: +5% / -10%
• Connected Load: 15 kVA
• Rated Current: 22 A
Ndedpfxeya Hg Ne Agrsb
• Maximum Current: 25 A
• Main Fuse: 35 A (Slow-Blow)
• Required Short-Circuit Power: 1600 kVA
• Pneumatic System Pressure: 5 – 10 bar
• Minimum Air Flow: 750 L/min
• Average Air Consumption: 180 L/min
Additional Equipment
• Automatic 12-Position Tool Changer
• Automatic Central Lubrication System
• Coolant System with 4 External Nozzles
• Automatic Tool Clamping System
• SK40 Spindle Interface
Machine Benefit:
• Reliable 12-Station Automatic Tool Changer
• Integrated Automatic Lubrication System for Guideways and Ball Screw Spindles
Dimensions
Machine Depth 2300 mm
Technical Specification
Taper Size SK 40
Seller
Registered since: 2017
1,384 listings online
Send inquiry
Telephone & Fax
Korbußen EMCOVMC 300 D
Austria AIRCRAFTOptimill MF 4-B
Oberweis EMCOVMC 300 D
Weiterstadt EmcoVMC 300
Austria EMCOMILL E350
Germany EmcoTurn E25
Netherlands EMCOE25
Příbram 1 TOS ZebrákFNGJ 32
Reiden CamproCPV-850B
Lebach FLOTTBC 40 Super
Used-Machines Trust Seal
What is the trust seal?
Used-Machines certifies selected sellers with the Used-Machines trust seal. Before approval, a standardized and comprehensive check is carried out by experienced Used-Machines staff.
What do we verify?
Check of
trade licence or commercial register extract
Verification of the dealer's
postal address
Validation of the
banking details
Verification of
accessibility to
main phone number
Credit report
may not contain negative criteria
Buyer complaints
can lead to withdrawal of the sealWhat does this mean for you as buyer?
The Used-Machines trust seal enables you, as a buyer, to identify trustworthy sellers who are very likely to do honest and righteous business, without having to do your own investigation.
Disagreements may of course still arise during the purchasing process. Used-Machines is not liable for any legal violations by buyers or sellers active on Used-Machines.