Injection molding machine

ENGEL Victory 330H/200V/140 combi Ecodrive

Condition: excellent (used), Year of construction: 2018, Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 8,000 h in automatic mode Year of construction: 2018 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit : Clamping force: 140 t Distance between tie bars: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition, the machine worked in a so-called clean room Operating hours: approx. 8,000 in automatic mode Total number of operating hours: 12,005 h Euromap 67 Robot interface Air valve x 6 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Screw diameter in the vertical injection unit: ⌀25 mm - approx. 58 g/hp It is possible to purchase the original Foboha turntable for an additional charge Turntable diameter: 740 mm In both injection units there is an option to replace the screw diameter with a smaller or larger one Robot Sepro Multi Inject 20 Year of construction: 2018 4-axis robot: 4 axes are driven by servomotors (electric): X, Y, Z, B (rotation) Travel distances in axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Redpjyli N Rjfx Afcjp Purchase of the robot for an additional charge Dimensions Weight: 10300 kg Length/width/height: 5.56x1.76x3.46 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), The machine was built in 2007 and has only worked 5,000 hours. It was used exclusively to test casting molds, which explains the low operating hours. The machine can be inspected and tested under power in Germany – 64850 Schaafheim. Rodpfx Afsxldtiocep For further information, please contact us. In addition to the machine, plastic granulates as well as various accessories and spare parts (see photos) are also available for purchase. ENGEL Victory 1050/220 Power, year of manufacture 2007. Location: The machine is located fully assembled in 64850 Schaafheim (Germany). Condition: The machine can be connected to power and demonstrated. Overall dimensions: Length: approx. 6,950 mm Width: approx. 1,800 mm Height: approx. 2,250 mm Weight: approx. 12,900 kg Platen and tool specifications: Clamping plates: approx. 820 × 820 mm Tie bar spacing: approx. 570 × 570 mm Minimum mold height: 250 mm Maximum mold height: 700 mm Daylight: 950 mm Center bore: Ø 125 mm Main technical data Feature Description Manufacturer ENGEL AUSTRIA GmbH Machine type Victory 1050/220 Power Year of manufacture 2007 Machine no. 167023 Control system ENGEL CC control (touch panel, graphical user interface) Clamping force 2,200 kN (220 t) Screw diameter Suitable for HP 1 nozzle (Ø 50–120 mm) Injection pressure Up to 3,000 bar at 400 °C Injection volume (PS) Up to 1,600 cm³/s The machine can be inspected and tested at any time at our facility in Schaafheim by prior arrangement. Best regards

Condition: like new (used), Year of construction: 2015, clamping force: 1,200 kN, Engel E-Victory 170H/50V/120 combi (2015) 2k machine Robot Engel Viper 20 Linear CC300 controll Clamping force: 1200 kN Opening stroke: 505 mm Ejector stroke: 130 mm Ejector force: 39.8 kN Pump drive power: 21.361 kW Injection unit 1 Screw diameter: 25 mm Max. swept volume: 59 cm³ Redpexyi Rvofx Afcjp Screw speed max: 400 r/min Screw speed max (current): 400 r/min Injection rate: 109 cm³/s Injection rate (increased): 109 cm³/s Specific injection pressure: 2400 bar Specific injection pressure (increased): 2400 bar Injection unit 2 Screw diameter: 20 mm Max. swept volume: 25 cm³ Screw speed max: 450 r/min Injection rate: 104 cm³/s Specific injection pressure: 2400 bar Machine with conveyor. Working hours : 41.427 h

Year of construction: 2002, condition: ready for operation (used), Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible. Redpoum U S Eofx Afcep

Condition: excellent (used), Year of construction: 2014, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: 194413, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,578 bar, injection weight: 440 g, mold height (min.): 300 mm, ejector stroke: 180 mm, opening stroke: 750 mm, overall weight: 12,740 kg, heating capacity: 13.4 kW (18.22 HP), Here, as a specialized dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: As part of our business, we also purchase well-kept injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Tax Information – Special Depreciation Benefits for Used Machines From 01/07/2025, used machines can also be tax-deducted in Germany with a special depreciation of 30% per year. In addition to the lower purchase price compared to a new machine, you can apply the same depreciation allowances as for new machinery. Keyword: Growth Booster, (§ 7 Paragraph 2 EStG-E) Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 ccm - Shot weight: 430 g - Heating capacity: 13.4 kW - Heating zones: 5 - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN - Opening stroke: 757 mm - Max platen distance: 1050 mm - Min mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Extras - Core pull The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: - Free loaded onto buyer’s truck or delivered free to site against reimbursement of freight costs Rodpfx Afsyc Ewxecop Information about our machines and company: - We only sell machines we have purchased from active production, stocked at our Hanover warehouse - All offered machines are tested and inspected before dismantling - We do NOT sell insolvency assets or act as brokers dealing in third-party property - All machines originate from successful, well-maintained operations - All machines offered can be inspected in our warehouse

Condition: good (used), Year of construction: 2015, clamping force: 2,200 kN, Equipment: documentation/manual, Controll : CC300 Clamping force: 220 t Injection unit Screw diameter: 45 mm (S8 Screw Geometrie G1, LD20) 30% GF Shot volume: 318 cm3 Type: Horizontal Drive: Hydraulic Rodpfx Asx H Awlsfcsp Clamping unit Min mould height: 300 mm max opening : 758 mm Equipment: Euromap 67 Mould heating controll 8 zones 2x Pneumatic valve 4x hydraulic valves 4x Core pullers Hours: ca 37000 Wittmann W818-4597 available Complete machine data on request.

Condition: good (used), Year of construction: 2014, functionality: fully functional, clamping force: 2,200 kN, Equipment: documentation/manual, Specification: Machine type: VC 750/220 spec Year of construction: 2014 Microcomputer CC200 Maschinenstunden aktuell: 41,869 h (pro Monat werden noch ca. 350 h dazukommen) Kernzug: 1 Kreis auf BAP (wurde nachgerüstet) Screw diameter: 55 mm S8 Schnecke – Geometry G1 Hydraulische Antriebsvariante HV1 Ölwartungseinheit OM 1.0 Redpfx Asycf H Tjfcjp Ölkühler mit erhöhter Kühlleistung Getrennter Kühlwasseranschluss für Maschinen- und Werkzeugkühlung. Durchflussregler 10-fach, 0-10 l min. Form height: 300mm incl. Material funnel

Condition: ready for operation (used), Year of construction: 2000, operating hours: 63,929 h, clamping force: 2,000 kN, controller manufacturer: ENGEL, controller model: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2000. It features a clamping force of 2000 kN, a tie-bar distance of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with dual injection units, hydraulic locking system, and a rotary table control, it ensures precise and efficient operation. If you are looking to get high-quality injection molding capabilities, consider the Engel ES650H/200W-200HL-2F machine we have for sale. Contact us for more information. • Condition: Well-maintained and serviced • Clamping unit: • Mold weight: 1500 kg • Total weight: 3000 kg • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1150 mm • Opening stroke: 700 mm • Daylight (opening): 700 mm • Min. mold height: 450 mm • Max. mold height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Return force: not specified • Centering diameter (A side): 110 mm • Centering diameter (B side): 90 mm • Locking system: Hydraulic / Pneumatic • No. of cores: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Stroke volume: 392 cm³ • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1240 bar • Injection speed: 120 g/s • Plasticizing rate: 41 g/s • Nozzle orifice: 15 mm Rsdpsyf Htysfx Afcop • Pump installed: 30 / 12.3 kW • Injection unit 2 (200W): • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection speed: 60 g/s • Plasticizing rate: 12 g/s • Nozzle orifice: 15 mm • Pump installed: ~6.8 kW • Controls and functions: • SPC (Statistical Process Control): Yes • Pressure interface: Yes • 2nd injection barrel: Yes • Mold monitoring: No • Special programs: Yes Additional equipment • Take-out device (robot): ERC 23/1-E • Travels: X = 500 mm, Z = 1400 mm • Max. mold dimensions (Y-axis): 1000 mm • Hot runner control: 18 zones • WZ sensor system: p–z–t–σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Condition: excellent (used), Year of construction: 2009, operating hours: 78,100 h, functionality: fully functional, screw diameter: 25 mm, Arburg 520S 1600 290/70 2-Component 78,099 hours, automatic Injection Unit 1: horizontal, 290mm, diameter 25mm, max. 71 cm³ Injection Unit 2: vertical, 70mm, diameter 18mm, max. 21 cm³ Opening stroke: 925 mm Electric table indexing 12-zone integrated hot runner 3x core pulls 2x air blow (control for needle shut-off) Various customer-specific inputs and outputs Interfaces: - ALS Rsdsx A Dy Rspfx Afcsp - Temperature control units - Dryers Multilift H 6kg: - 2x vacuum - 5x double-acting grip - Z-axis servo 800mm - C, G, X, and B axis pneumatic - Various customer-specific inputs and outputs (gripper monitoring, etc.) At Maschinen-Handel, we offer a commissioning guarantee for every machine purchased from us, meaning the machine will be started up by the manufacturer. This offers you, as a customer, maximum security on the used machinery market. Important Note!!! Current legal update – Tax advantage for used machinery Effective from 01.07.2025, used machines can also be subject to an annual special depreciation of 30%. In addition to the lower price compared to a new machine, you can benefit from the same depreciation allowances as with a new machine. Keyword: growth booster (§ 7 Paragraph 2 EStG-E)

Condition: used, Year of construction: 2001, Vertical injection moulding machine Arburg 900T 800-150, year 2001 Year of manufacture: 2001 Control: Selogica Clamping force [kN]: 800 Screw diameter: 25 Rodpfoxuq Uxjx Afcep Core pull: No Integrated hotrunner zones: 6 Total power [kW]: 26 Opening stroke [mm]: 300 Selecting unit: - Max. mould height [mm]: - Min. mould height [mm]: 250 Specific injection pressure [bar]: 2500 Max. shot weight [g for PS]: 45 Free space between tie bars [mm x mm]