Universal folding machine

FASTI

Condition: good (used), Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° work height max. 900 mm total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop Good/well-maintained condition (!!) Features: - Robust electro-hydraulic guillotine shear “swing cut” - Electric motorized backgauge - Electric cutting length limiter - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment - from the front - Front support table incl. recessed handles Isdoxabvqjpfx Aacehu - 1x stable side stop, with scale and tilt cam - 3x stable front support arms - 1x freely movable foot switch - Front finger guard - EMERGENCY STOP button at the front - Operating instructions * Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: used, functionality: fully functional, Year of construction: 1997, Update: On 23.01.26: Price reduced from 2450 to 1550 Euros. Very nice hand-operated three-roll bending machine Brand: Fasti Model: 103-20-1.25 Working range: 2040 x 1.25 mm According to nameplate, year of manufacture: 1997 VERY LITTLE USED! The roller surfaces are consistently smooth, even if the image might suggest that there are "grooves" in the left section. Location: Bremen _____ Our general terms and conditions apply. The seller does not assume liability for typing or data transmission errors. The information and images were provided by the owner and released for publication. The appearance of the offered items corresponds to their age and the images shown. The technical condition and wear of the items offered are consistent with their age. Used machines are sold exclusively to commercial customers and without warranty. Iodpfx Aaowu Euvecohu

Condition: good (used), Technical Specifications: Working length: 6040 mm Bending capacity (steel): 2.0 mm NC control Bending angle adjustment: 0 – 180° Upper beam opening: 500 mm Iodpfx Aasyiaucocohu Dimensions (L x W x H): approx. 8300 x 1350 x 2000 mm Weight: approx. 11 t Accessories: various segmented tools rear outfeed table The seller assumes no liability for typing or data transmission errors. The machine is in a condition commensurate with its age in terms of appearance, technology, and wear; used machines are sold without any warranty.

Condition: ready for operation (used), A high-performance crank plate shear with a low operating hours count is offered. Design: all-steel welded construction, stroke rate: 50 strokes/min, control FM 1S, backgauge manual or motorized (MAH 51/52), pneumatic hold-down device, rear safety light barrier. Inspection possible by arrangement. Ihjdpfox Hfgvjx Aaceu

Condition: ready for operation (used), A two-roll plate rolling machine Fasti is available. Roll diameter: 130mm, working width: 2150mm, max. sheet thickness: 3.5mm. Machine dimensions X/Y/Z: approx. 2900mm/650mm/1100mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Iodpjx U Dwvjfx Aacjhu

Condition: good (used), Year of construction: 1999, sheet width 2040 mm plate thickness 3 mm daylight upper clamping 350 mm bending angle max. 0-135 ° adjustment of lower and bend clamping 80 mm control Fastimatic M200 power requirement 2,2/1,5 kW weight of the machine ca. 2460 kg dimensions of the machine ca. 3,2 x 2,8 x 2,1 m Motorized machine with motorized bending beam adjustment for setting the sheet thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the top cheek stroke, the bending angle and the back gauge with max. 30 working steps, emergency stop switch with magnetic holder, back gauge with ball screw spindles, CE mark. The bending performance refers to sheets of strength of 400 N / mm². Inox less due to its greater strength. Little used machine, very good condition - original colour! Ihedpfx Ajvgnm Hsaceu Please notice that the price of a new CNC-machine in this dimension with back gauge is about 65000,--. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 1984, sheet width 3040 mm Ihjdpfexwzbbsx Aaceu plate thickness 4 mm distance between columns 3040 mm stroke of upper beam 200 mm adjustment of lower and bend clamping 100 mm total power requirement 6,4/3 kW weight of the machine ca. 6,3 t dimensions of the machine ca. 4,3 x 1,2 x 1,8 m Motorized folding machine with double-sided bending beam drive, lower, upper and bending beam adjustable, drive motors as brake motors - slip clutches as overload protection, bending angle adjustment via potentiometer, individual switching for each work step by hand switch, SEGMENTED TOP RAIL 120 mm height (Photo 7).Please notice that such a machine now costs about €70.000,--. As usual, the sheet thickness is based on a strength of 40 kg / mm². Machine dealer with own stock of 2500 m².

Condition: used, Year of construction: 1993, Max. bending length: 3240 mm Iedpeyhqhtjfx Aacehu Max. sheet thickness: 2 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bent rail and machine in top condition Weight: approx. 3000 kg

Condition: used, Max. sheet thickness: 3 mm steel Iodjyhcrqepfx Aacehu Roller center distance: 125 mm Maximum projection: 500 mm Right and left rotation Weight: about 500 kg Further sets of rollers available on request

Condition: used, functionality: fully functional, Year of construction: 1975, Mechanical Swing Bending Machine Make: FASTI Model: 208 2040x3mm Year: 1975 Technical Data Manufacturer: Fasti Model: 208-20-3 Year of Manufacture: 1975 Working length: 2040 mm Sheet thickness: 3 mm Upper beam stroke: 200 mm Stroke speed: approx. 7 mm/s Dimensions: Weight: Equipment • Swiveling upper beam • Motorized upper beam • Maximum upper beam opening: 200 mm • Lower beam adjustable beneath pivot point, 100 mm • Bending beam adjustable beneath pivot point, 100 mm Ijdpjx An Tujfx Aacshu • Bending beam swivels up to 180° • Backgauge adjustable from 0 to 600 mm • Various bending rails as shown in photo All information provided without guarantee. A powered demonstration is available at any time in our exhibition hall.