Double Label Machine

Fischer

Condition: used, Year of construction: 2009, - Veneer strip lengths (fiber direction): 350-1500 mm - Veneer strip widths (cross-fiber direction): 50-500 mm - Veneer surface width (cross-fiber direction): min. 260 mm - Veneer strip thickness: 0.3-1.5 mm Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR 15 / DAR 22 Year of manufacture: 2009 Cross-feed splicer For the most efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued, using PVAc or urea adhesives. This cross-feed splicer is the most economical alternative to longitudinal splicers for cross-fiber applications. Production Approx. 17-20 joints/min Kodpfxozuz Hlo Andona Technical data Veneer strip lengths (fiber direction): 350-1500 mm Veneer strip widths (cross-fiber direction): 50-500 mm Veneer surface width (cross-fiber direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips. Panel automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or undulating veneer - Unique, tried-and-tested horizontal pressing system that results in completely closed, solid glue joints - Solid, robust construction for a long service life, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate pressure gauge with direct access, etc. - Liftable pressure beams for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross-cutter For cutting to a pre-set format width (across the fiber direction) immediately after splicing. The straight alignment of the veneer must be observed and, if necessary, corrected by pressing a button. When working in endless mode, the required distance to the direct stacking device is set. Direct stacking device DAR-22 For outputting and stacking the veneer surface immediately after splicing or cutting. The spliced surfaces are gently output and stacked without this compact direct stacking device exerting any mechanical forces. Min. veneer sheet lengths (fiber direction): 350* - 1500 mm Veneer sheet widths (across the fiber direction): 260 - 500* - 2200 mm Stack removal from the left, right, or rear Max. stack height: 500 mm *Reliable stack alignment not guaranteed Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR15 / DAR 12 Year of manufacture: 2006 / 2014 Cross-feeding splicer For highly efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or urea adhesives. This cross-gluer is the most economical alternative to longitudinal gluers for cross-grain applications. Production Approx. 17-20 joining points/min Technical data Veneer strip length (grain direction): 350-1500 mm Veneer strip width (cross-grain direction): 50-500 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feed device for efficient and convenient semi-automatic feeding of veneer strips. Plate automation for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer Ksdpfxozuz Hfj Andjna - Unique, tried-and-tested horizontal pressing system that results in fully closed, solid glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate manometer with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain). The width is determined by two photoelectric cells that are mounted at the required distance from the cutter. Direct stacking device DAR-22 For outputting and stacking the veneer surface directly after splicing. The spliced surfaces are gently outputted and stacked on this compact direct stacking device without mechanical intervention. Min. veneer sheet length (grain direction): 350 mm Veneer sheet width (across the grain): 250 - 1200 mm Max. stack height approx. (small sheets are not perfectly aligned): 500 mm Max. stack width (across the grain) for discharge to the rear end: 1200 mm Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2007, - Cutting length: 3,400 x 1,300 x 35 mm (depending on the wood type) - Incl. 3 spare blades - Incl. milling cutter Ksdpfx Aezuzqqondena - Incl. gluing station - New energy chains installed in 2020 Veneer shear Manufacturer: Fischer & Rückle / Monguzzi Year of manufacture: 2007 Veneer shear with milling unit and gluing unit for butt joint gluing - Cutting length: 3,400 x 1,300 x 35 mm (depending on the wood type) - Incl. 3 spare blades - Incl. milling cutter - Incl. gluing station - New energy chains installed in 2020 - Length: 7 m - Width: 3 m - Height: 2 m Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Veneer machine Manufacturer: Fischer & Rückle Type: FZR 21 Year of manufacture: 2015 For the most efficient edge gluing of parallel-connected veneer strips into continuous or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or UREA adhesives. This edge feeding joining apparatus is the most economical alternative to longitudinal joining apparatuses for cross-grain applications. Production Approx. 17-20 joints/min. Technical data Veneer strip lengths (grain direction): 350-2150 mm Veneer strip widths (cross-grain direction): 50-600 mm Veneer surface width (cross-grain direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips Panel Automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - The Furnimaster-plus has a veneer alignment function (reverse transport movement) - Perfect joining of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, proven horizontal pressing system that results in fully closed, strong glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to touchscreen panel, clear symbols, separate manometers with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Kjdozuzptopfx Andena Cross cutter For cutting to a pre-set format width (across the grain) directly after splicing. Short widths can be pre-set and measured with the integrated encoder. Larger widths are determined by two photoelectric sensors that are mounted at the required distance from the clipper on the direct stacking device. Direct stacking device DA-12R, belt system For unloading and stacking the veneer surface directly after joining. The joined surfaces are gently unloaded and stacked on this compact direct stacking device without any mechanical impact. Min. veneer sheet length (grain direction): 350 mm Veneer sheet widths (across the grain): 250 - 1200 mm Max. stack height: 500 mm Max. stack width (across the grain) for unloading to the rear end: 1200 mm Note: The technical data and descriptions are taken from the original order confirmation. The data is for informational purposes only and is not binding. Another Fischer & Rückle machine, type: FZR 21, year of manufacture: 2009, is also available.

Condition: excellent (used), functionality: fully functional, total width: 800 mm, total length: 1,200 mm, table height: 860 mm, plate height: 160 mm, For sale is a used measuring table in very good condition. The stone plate is undamaged and in very good condition. Plate dimensions: Knjdpozuxt Nefx Andja Length: 1200mm Width: 800mm Height: 160mm Height from the floor to the top edge of the plate: 860mm Center height: 200mm Flatness: DIN 876, accuracy class: 1

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: SFV 80-N, Included with the machine: A wide selection of different forming dies for packaging timber products with various cross-sections. Machine documentation and operating manuals. Suitable for packaging planed timber and various other wood products. Ksdpfozuwcpox Andona The machine can be inspected and tested on-site: Observe the machine in operation. Perform a test run. Inspect the operation of the rollers, chains, and other mechanisms. Inspect all included forming dies. The machine is operating correctly and is ready for production.

Condition: ready for operation (used), Year of construction: 2001, A Fischer CNC 5-axis multi-machining center is available. Spindle power: 7.5kW, spindle speed: 18000rpm, tool positions: 12, clamping elements: 8, working length: 7000mm, clamping stroke: 60mm, clamping range: 380mm, max. spindle tilt: 90°, stop stroke: 60mm, stop width: approx. 250mm, tool holder: HSK-40E, max. saw blade diameter: 200mm, machine dimensions X/Y/Z: approx. 8200mm/2450mm/3200mm. Documentation available. An on-site inspection is possible. Kedpfx Anozdumqedsna

Condition: ready for operation (used), Year of construction: 2005, A complete 8-color Fischer & Krecke flexographic printing system is available. Number of colors: 8, max. print width: 1250mm, max. material width: 1300mm, repeat print length min./max.: 320mm/800mm, max. mechanical speed: 360m/min, printable materials: PET (min. 12µm)/PP/OPP/LDPE/laminate materials. Inks: solvent-based, drying: thermal oil. Roll diameter: 800mm, core diameter: 76mm/152mm. Including BST Video Web Inspection System Premius, cleaning system Flexpress AutoClean (ACA), viscosity control Bloss Viscolor 1300, automatic roll change and rewind Flying Splice as well as an additional chill roll with a diameter of 460mm. Documentation available. On-site inspection is possible. Knodpfx Anevva E Hodoa

Condition: used, table length 4000 mm table width 3000 mm table height 400 mm Arrival table with linear guide and height indicator dimension Length: 4000mm Width: 3000mm Knodpfx Aegrnbgsndsa

Condition: excellent (used), Differential pressure indicator, transmitter, monitor, sensor, differential pressure indicator, differential pressure switch -Manufacturer: Fischer, Digital Differential Pressure Switch -Article No.: DE45520040PK03MW -Basic measuring range: 0...4 mbar -P max.: 50 mbar -Operating voltage 24 V DC/AC -Number: 2x pressure switches available -Price: per piece -Cardboard dimensions: 200/160H140 mm Knsdpeghb Ezofx Andja -Weight: 0.5 kg/piece