Flingk KHM2 2400 #782200

FLINGK KHM2 2400 #782200

Suitable for Kramer KL35.8T/37.8T KT 407/457.

The KHMⅡ is suitable for loaders, telescopic handlers, and front loaders with a machine weight of 5 to 10 tons. With the introduction of the new Series Ⅱ, the digging depth has been increased, resulting in a larger capacity. Furthermore, the bucket teeth have a finer toothing, which requires significantly less force for cutting. Thanks to the well-thought-out design, the weight is kept to a minimum. The bucket can be equipped with a solid bucket and with teeth. The addition of the letter "T" to the model number indicates a toothed bucket.

THE 5 UNIQUE ADVANTAGES OF THE FLINGK BUCKET
❶ The pivot points of the bucket and the cylinders are fitted with ball joints. This means that the pivot points are not susceptible to tearing, and any deformation due to external forces can be absorbed. The pivot points are easily accessible for maintenance.
❷ The bucket of the bucket is rounded on the inside. This ensures that the roughage can be easily unloaded and does not stick in the corners. This reduces wear on the loader or telescopic handler and improves the comfort of the operator.
❸ The buckets have a large “overbite,” which ensures that the silage is cut cleanly.
❹ The front knives, made of wear-resistant hardened steel, have a fine toothing. This provides a clean cut and requires little force. As a result, the silage wall will remain fresh for longer and less force will be exerted on the bucket. The knives are screwed in and can therefore be easily replaced if damaged or worn.
Dodj Agtipjpfx Aa Ejkw
❺ The sharply milled lower knife is made of Hardox 500 material, making it extra wear-resistant. Due to the sharp knife, the bucket can be easily pushed into the silage. Because the angled side of the knife is placed on the underside, the knife is less vulnerable and will remain sharp for longer.

The listing was translated automatically. Translation errors are possible.