Sliding table saw

FORMAT4 TEMPORA 60.12

Condition: as good as new (ex-display), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 8 mm, workpiece width (max.): 60 mm, workpiece length (max.): 140 mm, with approximately 4000 m of operating time. Comes with a new machine warranty. The machine is sold without the illustrated return system. Min. workpiece width (mm): The minimum workpiece width varies depending on workpiece length, height, and surface quality: 70 Processing of roll material in thick PVC/ABS from 0.4–3.0 mm & strip material with a thickness of 0.4–12 mm "e-motion" control system with an 18" touch-screen color display with integrated maintenance software and optional network connectivity Stable machine frame made of steel Extendable workpiece support makes it easier to work with large workpieces Motor-controlled positioning pressure beam with 2 offset arranged roller tracks for even pressure distribution on the workpiece Chain feed with a feed rate of 12 m/min & rubberized support pads for optimal grip on the workpiece Ball-bearing roller support plate with a diameter of 770 mm Infeed guide rail with sliding rollers for sensitive materials Edge milling unit with tool-controlled diamond milling cutters and 2 motors, each with 1.5 kW at 12000 rpm. Chip removal is motor-controlled and adjustable from 0–3 mm, incl. 2 diamond milling cutters Ø 80 mm H 49 mm Z2+2 Edge detection by means of an infrared sensor Shear cutting unit for pre-cutting thick PVC/ABS edge materials Teflon-coated gluing unit with a capacity of 1.5 kg, application by means of a finely adjustable gluing roller & quick-change system and heating cartridge monitoring (~ 250 m per 1 kg of granules on a 19 mm board). Reversing function for the glue tank. Ideally suited for applying solid wood edges or laminate edges Pneumatically tool-controlled gluing unit Motor-controlled positioning pressing unit with 1 large driven pressure roller and 2 conical counter-pressure rollers, pneumatically pre-tensioned Cutting saw unit with 2 independent motors, each with 0.50 kW at 12000 rpm, pneumatically swiveling 0–15° Multi-function milling unit for radius, flush and bevel milling of thin edges with 2 independent motors, each with 0.75 kW at 12000 rpm, motor-controlled positioning edge adjustment & pneumatic retraction function from the control panel Corner processing unit for soft-forming and post-forming workpieces for processing the end edges with edge thicknesses of 0.4–3.0 mm & workpiece heights of 10–60 mm 2-axis motor-controlled positioning radius drawing blade unit incl. pneumatic retraction function Polishing unit with 2 motors Gjdjzcymhspfx Aagjbn Special equipment 020 Surface drawing blade, pneumatically tool-controlled 032 Spray device for cleaning agents before the polishing unit 042 Spray device for release agents on the machine infeed side (PUR adhesive) 046 Extended infeed guide rail (+400 mm) 047 Edge milling cutter with replaceable cutting inserts 64 mm height instead of 49 mm, 2 motors with 2.2 kW instead of 1.5 kW each 051 Multi-function milling unit with vertical multiple feeler rollers for processing workpieces with pot-hole drills 053 Spray application of lubricant Pneumatic-mechanical infeed stop to prevent premature feeding of the machine 059 Automatic lubrication for the chain conveyor 067 Reversing function for the glue tank. Ideally suited for applying solid wood edges or laminate edges 050A Additional quick-change glue tank, counter-rotating 090 "classic" multi-function & radius drawing blade unit e-motion with radius 1+2 mm 071 Motorized adjustment and positioning for corner rounding milling cutter 085 Preparation for u-motion professional 086 Tool preparation R=1.