FGT Graphic Machinery - Labelpress

Gallus TCS 250

Condition: used, Year of construction: 2016, The Gallus TCS 250, manufactured by Gallus in 2016, is a high-performance label printing press designed for efficiency and precision. With a format of 265 mm and a print count of 2 million, this machine is currently available in stock and located in Germany. This press is equipped with a range of advanced features to meet various printing needs. It operates at a speed of 11,000 impressions per hour and has a cylinder circumference of 254 mm, accommodating a web width of 265 mm. The hotfoil stamping speed is 8,000 cycles per hour, with a maximum print size width of 265 mm and a minimum of 130 mm, allowing for precise format adjustments in increments of 0.01 mm. The machine operates at a voltage of 400V for the main unit and 230V for peripherals, with a net frequency of 50Hz. Key features include a feeding unit with web cleaning, corona pretreatment for enhanced adhesion, and trimming and suction capabilities. The press can handle paper weights ranging from 80 to 180 g/qm2 and carton up to 300 g/qm2 with a maximum thickness of 0.3 mm. It is compatible with commercially available adhesive bonds and supports UV offset printing. The configuration includes 4 printing units, 1 coating unit, 1 rotary die cutter unit, and a rotary hotfoil embossing unit. Additional features include web inspection via the Powerscope 4000 manual system, a Uviterno Coldstar water-cooled drying model with UV capabilities, 4 trimming knives, mesh pulling monitoring, and an IR dryer. The maximum web diameter is 800 mm, and the press is equipped with remote maintenance capabilities, a plate tool, and maintenance tools for ease of use and upkeep. Format: 265 mm Equipment: Speed: 11.000 T/h Cylinder circumference: 254mm Web Width: 265mm Hotfoil Stamping Speed: 8,000 cycles/h Max print size width: 265 mm Min print size width: 130 mm Format length graduation: 0,01 mm Machine Voltage: 400V Voltage Peripherals: 230V Net Frequency: 50hz Feeding Unit Web Cleaning Corona Pretreatment Trimming and Suction Paper: 80 bis 180 g/qm2 Carton: up to 300g/qm2 at max. 0.3mm Adhesive Bonds: commercially available UV Offset Printing Units: 4 Coating Units: 1 Rotary Die Cutter Units: 1 Rotary Hotfoil Embossing Unit Web Inspection Web Inspection type: Powerscope 4000 manual Drying Model: Uviterno Coldstar Water cooled IR or UV: UV Trimming Knives: 4 Mesh Pulling Monitoring IR Dryer Max. Web Diameter: 800mm Remote Maintenance Plate Tool Itsdpfxovfx A Ae Ad Dep Maintenance Tools

Condition: good (used), Year of construction: 2006, 6 printing units letterpress Ijdpfx Asw T Rnked Dstp 1 coating unit 7 UV units (IST) 1 die-cutting station with GAP-Master (GAP-Master renewed in 2022) 1 rewinder, Serame, 2006 1 documentation

Condition: used, Year of construction: 2005, Web handling system with web guide, web cleaning, and corona treatment unit 1 screen printing unit (semi-rotary) Itjdpfewvv H Sex Ad Djp 5 offset printing units (semi-rotary) 1 hot foil stamping unit (semi-rotary) 1 additional screen printing unit (semi-rotary) 1 embossing unit (flatbed) 1 flatbed die-cutting unit Matrix stripping and dual rewinding system A complete overhaul was carried out in 2017, including full mechanical and electronic refurbishment. Replacement and upgrade of the control system to Version 3

Year of construction: 2000, condition: used, Max. speed: 11.000 cycles/h, web width: 130-265mm, max. print width: 254mm, format length: 101.6-254mm, max. processing width: 254mm, paper strength: 100-180g/m², max. cardboard strength: 300g/m², length: 10,509mm, height: 2806mm, weight: 9.5t. Itedpodv Nigjfx Ad Dep

Condition: ready for operation (used), Year of construction: 2010, Large semi-automated Pace cutting system Polar 137 XT-Autotrim with pile lifter, jogging system with count scale, gripper transport system, rotary gripper, and delivery unit Year: 2010 Approx. 5.43 million cuts Workflow: Itodpfx Adjxd U Saj Dep The material to be cut is raised to an optimal working height using a loading lift, placed into the jogger by the operator, automatically jogged, and then transported via the Autotrans gripper system from behind the jogger to the rear table of the high-speed cutter and rotated. After cutting, the Transomat automatically stacks the layers onto a pallet, allowing continuous cutting operations. Polar Stack Lift LW 1200-4 Platform size: 80 x 126 mm Load capacity: 1200 kg Equipped with steplessly adjustable photoelectric sensors for automatic lifting and lowering. Jogger RAH-4 with air removal roller and unloading for rear-table feeding Working format up to 75 x 105 cm Unloading of the jogged cutting material occurs automatically to the rear into the STR stacking rack. The Autotrans gripper transport system then handles layer transport onto the rear table of the high-speed cutter. Sheet scale – Polar count scale Avery Weigh-Tronix For creating quantity-accurate cutting layers Gripper transport system POLAR Autoturn – clamp transporter for rear-table loading and rotary gripper Takes over the prepared cutting layer from the stack rack or buffer table Via air tables, which use air cushion for optimized material handling, the cut material is transported directly onto the rear table of the high-speed cutter and placed with precision. The cutting layer is held firmly by the grippers during transport, ensuring even pre-aligned layers remain precisely squared during movement. Cutting machine Polar 137 XT-AT with touch control And Autotrim function for automatic waste removal under the front table during cutting - Lowerable side gauge left (required for rear-table loading); also allows handling of formats with a diagonal of...

Year of construction: 2000, condition: like new (used), Gallus TCS 250 Itjdpfx Ajgy H Axjd Djp Age: 2000 Available: Immediately Size : 254 mm - Size Length ;max.: 254 mm; min.: 101.6 mm - Stock: Paper:100 to 180 g/m² Cardboard: up to 300 g/m² , max. 0.3 mm Thickness - 2 Letter Printing Units - 1 Flexo Printing Unit - 3 UV Drying Units Type Uviterno - KB Rotary Die Cutting Unit - Magnetic Cylinders: Z72,74,76,78,80,84,88,92,96,100,104,108,112,116,120,124 - Unwinder with Roll Diameter 1.040 mm - Web and Side Trimming Unit - Webguide - Rewinder with max. roll diameter 300mm - Speed up to 11.000 printings / h - Touch Screen

Year of construction: 2005, condition: like new (used), Gallus TCS 250 Label Printing Machine Year of Manufacture: 2013 _____ Machine Specifications and Equipment:  Unwinding with web control, cleaning and corona unit  1 screen printing unit (semi-rotary)  5 offset printing units (semi-rotary)  1 foil stamping unit (semi-rotary)  1 screen printing unit (semi-rotary)  1 relief embossing unit (flat)  1 punch (flat)  Matrix take-off and 2 rewinders Isdpfxjvw R Eaj Ad Dstp The machine was put into operation in 2005 and the relief embossing unit was added in 2008. The machine was completely overhauled in 2017. As part of this, the control system was also replaced and upgraded to the latest version 3. It is currently still in full operation and in good condition. _____ Accessories Included:  Manuals  Keyes  Etc. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment)

Condition: good (used), Mohr 66 Plus Polar Guillotine This machine is ready for production, after a complete overhaul, and in like-new condition. Manufactured in 2016. Mohr Polar is the most recognizable and highly valued brand of bookbinding guillotines in the world. Made in Germany. Working width: 660mm Stack height: 80mm Machine weight: 620kg Power supply: 380V Equipment: Programmer with an 18.5″ display and the ability to store 1998 programs Chrome-plated table Photocells Itodpfxexmu Ums Ad Dop Air table Intuitive operation Documentation, tools.

Year of construction: 2010, condition: excellent (used), MECTEC A2220/B-C160-110/110-L ID.NO. 2504 Mectec label applicator without wave function year mod 2010 including conveyor belt. Ijdpfoki Tqvox Ad Dstp Dimensions 150 x 100 H 180 cm.

Condition: good (used), Year of construction: 2004, 1x unwinder 6x offset printing units Itodpfx Adsxlzdrs Djp 1x flexo coating unit for varnishing 1x rotary screen printing unit (doctor blade unit missing) 1x hot stamping unit (one hot bar defective – currently heats up to approx. 100°C) 1x laminating unit 1x semi-rotary die-cutting unit with GAP-Master 1x BST inspection camera 1x edge trimming knife 1x waste matrix rewinder 1x rewinder 1x TechoTrans cooling unit ▪ Spare parts such as motors, cylinders, and new rollers for the printing units ▪ Accessories such as folding machine and plate perforation ▪ Including extraction system, motor, and platform Web width: 340 mm Repeat length: min. 155 mm Repeat length: max. 304.8 mm Max. print width: 330 mm