Roll Laminator Cold/Hot

GBC Ultima 65

Condition: used, Year of construction: 2002, Stanzmaschine für Mappen - Puching machine for wallets GBC Velo BindYear 2002 - . GE04190Stanzkapazität 45 Blatt pro Vorgang / Punch Capacity Up to 45 sheets of 20 lb. Bond per lift Maschinenabmessung 27,3 cm H x 49,5 cm T x 49,5 cm B / Dimensions 27.3 cm H x 49.5 cm Dx 49.5 cm W 10 Gewicht 40 kg / Weight 40 kg. (88 Lbs.) Anschlusswerte 230 V, 50Hz, 3,5A / Electrical 115 V,50 Hz,3.5 A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test B98Twmn7Nv

Condition: good (used), GBC Catena 105 Roll Laminator Machine in very good condition, double-sided lamination, cold and hot, original base included, Lamination width 1050 mm Un2Unaijf2 Roll laminator equipped with hot rollers covered with silicone. Lamination with foil thickness 25 to 250 mic., hot or cold. Possibility of laminating with ready-made foil, making „cromalins” and also sticking on foam cardboard (adjustable working gap – up to 5 mm). Maximum lamination speed 1.5 m / min. Direction change switch. Microprocessor control of temperature and speed of work, modern control panel with liquid crystal display. Easy-to-use roller pressure and foil tension adjustment system. Lamination width up to 1050 mm. It has a safety system preventing direct contact with heating rollers. Power supply 230V / 50Hz.

Condition: excellent (used), Year of construction: 2007, ⦁ format B1 Urbnhxmb0V ⦁ year of production - 2007 ⦁ condition - very good ⦁ stacker

Condition: excellent (used), Bezel (28371) Center height 200mm diameter 65mm weight 9 kg more data, see picture S9Spn

Condition: good (used), Year of construction: 2006, Functionality: fully functional, 2006 GBC Quantum P70IX Automatic Punch with 3 punching dies 2:1, 3:1, 4:1 Speed: Up to 105 cycles / minute, 60,000 sheets per hour Sheet size: Punch edge 14 to 30 cm”, side edge 14 to 23 cm Paper: 70 gsm to 300 gsm Dimensions: 60”W x 55”L x 52”H (152cm x 140cm x 132cm) Die Sets: Interchangeable die sets can be switched in seconds without tools Weight: (386kg) Un2Qvzr9Et Power Supply: 220VAC, 50/60Hz, Single Phase, 2.7 Amps,

Year of construction: 2008, Condition: excellent (used), centrifugal vertical cantilever pump chemcial pump FIP ALFA 65-40 V2CM construction of year:2008 DN:50 Nominal flow 40 m³/h Nominal head:45 m p [bar]: 16 T [°C]: -25 ÷ + 140 RPM: 1470 electrical power 16,5KW 400V 50Hz 34,7 A engine speed: 1470 Execution: Cbxoys0Uzo vertical, radially split volute casing pumps sump pump or channel impeller Applications: handling of paint, aggressive and process liquids, even with the presence of solid particles in suspension, in chemicals and petrochemicals industries length: 1700mm width: 700mm weight:450 kg

Condition: used, Year of construction: 2002, Machine/vehicle number: 13116, Bindemaschine - Binding machine GBC Sure BindYear 2002 Online-Video-Inspection by Skype-Video Jx3Hay We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 2004, Functionality: fully functional, - Offer number: 65/113 - High voltage tester - Manufacturer: Schleich - Type: GLP2-e - Serial number: 3342 Gov7Bjv - Year of manufacture :2004 - Power :220-240V 50-60 Hz max 10A - up to 100 KV - Dimensions :W450 x D380 x H180mm - Weight :36 Kg - without power cord - optical condition according to photos (the knob of the main switch and the switch lever for the overcurrent are broken off during loading see photo but both are working ) - Used - functional Notes: The goods offered here usually come from company liquidations and insolvencies. Due to missing nameplates it is not always possible to give exact item data. The item pictures are original photos that show the actual item condition. If several identical items are offered, only one of the items is photographed. There may be slight variations in the item condition of the individual item. Should an item be opened or repaired/rebuilt by the buyer, any warranty claim will be void. This also applies if repairs and modifications are carried out by third parties without prior agreement. Company names and trademarks used are the property of their owners. They serve exclusively for the identification and description of the existing goods.

Condition: excellent (used), Machine/vehicle number: 2802048, Bind Machine Plastic Comb Binder Model 16-DB Caous0Pbsu s.- No: 2831384

Condition: used, Size: 51 mm Equipments: punching tool for DTP 340 M round hole 6 mm, division 2: 1 as is Closing jaws Bn0Olaviydz punching tool for DTP 340 M round hole 6 mm, division 3:1

Condition: used, Dans cette offre, vous achetez un système de perforation d'occasion "GBC SteamPunch Ultra". D902E9D3V État : Il s'agit dans cette offre d'un appareil d'occasion qui peut présenter des traces d'utilisation. (petites éraflures ou jaunissement). Le fonctionnement de l'appareil a été testé. Emballage et expédition : Vous pouvez volontiers venir voir l'appareil pendant nos heures de bureau. Veuillez prendre rendez-vous à cet effet ! Un emballage résistant à la mer et une expédition dans le monde entier sont possibles sur demande ! Pour plus d'informations, vous pouvez bien sûr nous contacter personnellement.

Year of construction: 2019, Condition: new, Wraparound heat-shinkable Feyu3Gycc MIS - 65 1120 - 650 CW BK/T SP 127030 - 12200650026-040 Prize per unit carton

Condition: used, Year of construction: 2018, Rollen-Laminiergerät / Roll Laminator Cold/Hot GBC CATENA 35Year 2019 - Serial-No. PCG0226 D7Pwvs0 Formatbreite / Size width max. 650mm Heiß-/Kaltlaminierung / Hot and Cold laminationSpecifications Operation Mode Roll film laminator Heating System 2 heated rollers Laminating Speed (variable) max. 3000mm/min Max. Pouch Thickness max. 2 x 250 micron rolls Photo friendly Warm up Time 10min Power Supply 220/240 V/AC Laminating Thickness max. 6.0mm Laminating Width max. 330mm Anti-Jam Technology Manual Reverse Approx. lamination time (A4) 6 secs (A4 75 microns) Dimensions (WxHxD) 685 x 330 x 457mm Weight 37.8kgs Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2001, Condition: excellent (used), TRAUB TNC 42/65 CNC lathe Bhic3C3W Scope of offer: TRAUB TNC 42/65 CNC lathe Resy belt filter system / high pressure pump Chip conveyor Siemens fire extinguishing system Tool holder set (12 pieces) TECHNICAL DATA Max. turning length: 450 mm Max. turning diameter: 42 mm Rotational speed: 5600 rpm Turret, number of tools: 2 x 14 Driven tools, speed: 8000 rpm Dimensions: 3450 x 2400 x 2100 mm Weight: Approx. 5000 kg We do not take any responsibility for the correctness, completeness and actuality of the information.

Condition: ready for operation (used), Functionality: fully functional, A Pini & Kay frame sawmill with various infeed and cross conveyors is for sale Everything already removed and stored. Pini & Kay with overhang adjustment, 65cm clearance and 500 stroke, complete infeed incl. saw blades, clamping carriage also available Uqzbavfpav

Condition: used, Machine/vehicle number: 8802, Inlet cross section approx. 650x1000 mm 3-knife rotor (staggered knives) Jwlzha 2 stator knife rows Rotor diameter 500 mm Rotor width 1000 mm

Year of construction: 2000, Condition: excellent (used), HAUG Sauer Compressors AG High-pressure piston compressor with associated pressure vessel and control cabinet 2Vuefq Type: QTOX 120/65/35 WM-W Max. final pressure: 66 bar Volume flow: 50m³/h Nominal power: 18.5kW Nominal speed: 1450min Voltage/frequency: 400/50V/Hz Year of construction:2000 Maschinen- und Behälterbau GmbH High pressure tank up to 65bar Type MB 00320-2,10 1000 liters Year of construction:2017

Year of construction: 1996, Condition: used, Machine/vehicle number: 216301, degree:1000 weight of the machine ca.:13 t Consisting of: Chamber furnace 1000 C Washing machine Bjepc0H8Xq Tempering furnace 600-800 C Capacity 350 kg

Mileage: 379,802 km, Power: 140 kW (190.35 HP), First registration: 12/2018, Fuel type: diesel, Number of seats: 17, Gearing type: automatic, Emission class: euro6, Color: blue, Brakes: retarder, Condition: used, Equipment: Abs, Air Conditioning, Original kilometers Engine: Mercedes Benz Euro standard: Euro 6 Gearbox: Automatic Seats: 12+1+4 high/fixed Dpg0Jp Standing room: 9 Safety * Retarder * Cruise control * ABS, ASR, EBS * reversing camera Passenger compartment * Air conditioning * Double glazing * Stroller parking space * Wheelchair ramp * Wheelchair space * Request to stop Exterior * Matrix * Double-width center door * Power steering * Tachograph with card * Sun visor * Electric exterior mirrors * Driver's door * Roof hatches Audio & Communication * Navigation system * Radio * USB connection Miscellaneous * German vehicle documents * Twin tires * Tires: VA: approx. 40%, HA: approx. 40% * Our internal vehicle number: 10555 Errors excepted. Pictures and text may differ from the vehicle. Constantly over 300 vehicles on offer.

Condition: new, Year of construction: 2024, Functionality: fully functional, Warranty duration: 24 months, DGUV certified until: 08/2026, Baguette - long roller Model: Ultima with 3 rollers Capacity: min 50 - 1200 g max (depending on the type of dough) Unrolling width: up to max. 750 mm stainless steel design, Connection: 400V, 1.1 kW, 16A-CEE plug Dimensions: 966 x 855 x 714 mm, WxDxH NEW machine with 24 months warranty Option: 3Lv87Mf base speed controller infeed conveyor discharge tours Discharge belt with drive feed guides Visit our large bakery machine park!

Year of construction: 2016, Condition: good (used), Item: M-3525-APV-Pump-W+65/350-235 STD Crbz8Z3Nil APV Centrifugal Stainless Steel Pump Type: W+65/350-235 STD, Year: 2016 2 pieces identical! 11 kW, 1450 Rpm Used!

Condition: reconditioned (used), Vertical lathe MORANDO 2 posts Mod. KR 50/65 CNC SIEMENS 840 SL. Machine dimensions complete with guards (approximate): Width : 12.000 mm. Depth: 7.500 mm. Height: 11.000 mm. Machine equipment : Table diameter: 5,000 mm. Dxmggq N.1 RAM turning tool holder. N.1 RAM with drilling/milling spindle ISO 50. Working capacity : Spindle capacity : 100 Ton. Max turning diameter between columns : 6.500 mm. Turning height: 4,000 mm. Max. passage under crossbeam: 4,100 mm. Vertical travel of the crossbeam: 3,800 mm. Spindle motor power: 80 Kw. Spindle rotation speed 3 ranges : 1° 0-7 rpm. 2° 7-20 rpm. 3° 20-60 rpm. X and X' axis carriage characteristics: Stroke : 3,400 mm. Feed speed : 0 - 6.000 mm/min. RAM Z and Z' axis characteristics: Stroke : 2,000 mm. Feed rate : 0 - 6.000 mm/min. Drilling RAM spindle : Tool attachment ISO 50, hydraulic, internal/external coolant passage. Rotation speed : 0 - 2.000 rpm. Motor : 28 kw. Spindle rotation speed with 2 ranges : 1° 0 -500 rpm. 2° 500-2000 rpm. Spindle RAM features : Hydraulic tool coupling, internal-external coolant passage. Electrical characteristics : CNC Siemens 840 SL. SIEMENS SINAMICS motor package. Optical scales HEIDENHAIN. Installed power : about 120/130 Kw.

Year of construction: 2023, Condition: new, CNC precision turning center with 2 turrets and a Y-axis. Number of axes: 8 - X1,X2,Y1,A,Z1,Z2,C1,C2 Bar capacity: 51 or 65 mm Max. Machining diameter: 250 mm Max. Machining length: 210 mm Main spindle speed: 5,000 1/min Main spindle motor power: 18.5/15/11 kW Bar passage / max. bar diameter counter spindle: 42/41 mm Counter spindle speed: 5,000 1/min Counter spindle motor power: 9.0/7.5/5.5 kW Travel X1,X2,Y1,A,Z 162/170/70/550/500 2 turrets per 12 stations Turret speed: 4,000 1/min Motor power turret: 3.7/2.2 kW Switching time: 0.2 sec. Bssh73Htsb Tool holder: BMT 45 Speed: 4,000 1/min Jaw chuck main spindle / counter spindle: 6 inch / 6 inch Control: Fanuc 31i-B

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, Sword folding unit Z2/65 The mobile knife folding unit Z2 with M1-Control and pneumatically driven knife can be swiveled through 180° and enables folding from above as well as from below. It can be used for various applications. The Z2 has an optional fine lateral adjustment of the entire knife unit. The larger infeed width of the Z2/65 allows wider formats to be processed. This opens up even more application possibilities, especially on buckle plate folding machines as folding unit II or on large combination folding machines as folding unit IV. C9Z3Xt3

Condition: ready for operation (used), Mettler Toledo ICS425 K-3XS/ DR/F/m/65 Precision industrial scale Jutoh3Lvqz There are 3 pieces available. Description see picture 2 Description was taken over. You are welcome to come by for a viewing You will receive a proper invoice. For foreign customers can also be a net invoice. Prerequisite is a valid Ust.Indent.Nr. Subject to prior sale. Visit our store and see our other offers. Indicated company names and trademarks are the property of their owners and serve only for identification and description of the products. Deviations from technical data and errors in the description of the article can happen and remain reserved.