Stia Comercializadora

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: Godsx Uyzqopfx Aa Iott ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 3,476 h, OM Crusher Apollo Year 2004 Maximum production: 240 t/h – Minimum production: 35 t/h Hydraulically adjustable jaw crusher Feed opening size: 1050x730 mm Discharge opening adjustment: 35–145 mm 6-cylinder diesel engine, 186.5 kW Operating hours: 3476 Good condition Immediately available We consider trade-ins of vehicles of all makes—MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA—with CIFA, SERMAC, PUTZMEISTER equipment; or earthmoving machines from CATERPILLAR, FIAT HITACHI, KOMATSU. Gtodsx Uyymspfx Aa Ist

Condition: used, functionality: fully functional, MB 3 m³ Concrete Mixing Plant Horizontal twin-shaft mixer – Output: 3 m³ per cycle Composition: - Mixer unit and accessories - Support frame with service walkways on operating levels - Cement and water weighing system, aggregate pre-loading Godpfxox Uyxij Aa Iett - Machine-side distribution panel located in insulated cabin with doors and windows Good condition, available immediately WE CONSIDER TRADE-INS OF VEHICLES OF ALL MAKES, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, PUTZMEISTER SYSTEMS, OR EARTHMOVING MACHINES BY CATERPILLAR, FIAT HITACHI, KOMATSU

Condition: used, Year of construction: 2008, lifting height: 16,150 mm, fuel type: diesel, Weights Empty weight: 8.946 kg Functional Lifting capacity: 680 kg Working height: 1.815 cm CE mark: yes Condition Gtsdjx Uyw Ejpfx Aa Iot General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): 4,78x2,29x3,15 Additional information Please contact Christian Theißen for more information Manufacturer: Genie Model: GS5390 Year of build: 2008 Condition: Used Data: Max. working height: 18,15 m Platform height: 16,15 m Movable up to working height: 18,15 m Lifting capacity: 680 kg Platform dimensions LxW: 4,78 x 1,83 m Platform length pushed out: 7,36 m Transport dimensions LxWxH: 4,78 x 2,29 x 3,15 m indoor use only: no Drive type: Diesel Empty weight: 8.946 kg Special features: All-wheel drive, attachment points for restraint systems (PSA), supports, double extension.

Condition: good (used), Year of construction: 2013, lifting height: 16,150 mm, fuel type: diesel, Empty weight: 8.946 kg Lifting capacity: 680 kg Working height: 1.815 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Transport dimensions (LxWxH): 4,78x2,29x3,15 Please contact Christian Theißen for more information Manufacturer: Genie Model: GS5390 Gtodpfx Aasx Uywxj Iot Year of build: 2013 Condition: Used Data: Max. working height: 18,15 m Platform height: 16,15 m Movable up to working height: 18,15 m Lifting capacity: 680 kg Platform dimensions LxW: 4,78 x 1,83 m Platform length pushed out: 7,36 m Transport dimensions LxWxH: 4,78 x 2,29 x 3,15 m indoor use only: no Drive type: Diesel Empty weight: 8.946 kg Special features: All-wheel drive, attachment points for restraint systems (PSA), supports, double extension.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details cutting diameter 730 mm saw band length 9195 x 67 x 1,6 mm cutting width 830 mm Control Kasto EasyControl saw band speed 12 - 120 m/min total power requirement 30 kW weight of the machine ca. 11,6 t dimensions of the machine ca. 4800 x 2600 x 2870 mm Godpfox Uywrex Aa Istt Additional information Machine is in good condition. On 7th. October 2025 the bearings of the roller wheel (belt tensioning side) have been replaced by KASTO and the switch for the belt tension was replaced. The machine can be demonstrated under power in our warehouse. Heavy-duty, high-performance band saws with a horizontally and parallel-traversing saw blade for cutting solid material, profiles, and pipes of all qualities, including difficult-to-cut materials such as titanium, Hastelloy, Inconel, etc. The optimal use of carbide or bi-metal saw blades was consistently considered during the development of these machines. Cutting range Cutting diameter: 730 mm Cutting width: 830 mm Saw blade size: 9195 x 67 x 1.6 mm Total power requirement: 30 kW Machine weight: 11600 kg Machine dimensions (L x W x H): 4800 x 2600 x 2870 mm Equipment: Carbide package With driven heavy-duty roller conveyors for the infeed and outfeed sides. Roller conveyor on the inlet side, dimensions (LxWxH) 4000x1000x500 mm Roller conveyor on the outlet side, dimensions (LxWxH) 3000x1000x500 mm Weight 2000 kg Chip conveyor

Condition: used, functionality: fully functional, mileage: 235,000 km, first registration: 01/2011, Year of construction: 2011, SCANIA G440 with Sermac 28m concrete pump Year 2011 Euro 5 4 axles 235,000 km Fitted with Sermac 28m concrete pump PTO (power take-off) 40/50% tyres Gjdpfjx Uywfjx Aa Iett Valid MOT/inspection Good condition Immediately available WE CONSIDER TRADE-INS OF VEHICLES OF ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, WITH CIFA, SERMAC, PUTZMEISTER EQUIPMENT OR EARTHMOVING MACHINES CATERPILLAR, FIAT HITACHI, KOMATSU

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: M274150, cutting length (max.): 6,100 mm, total length: 9,500 mm, total width: 1,800 mm, total height: 1,800 mm, input voltage: 400 V, rotational speed (max.): 2,800 rpm, overall weight: 3,000 kg, power: 7 kW (9.52 HP), input frequency: 50 Hz, input current: 18 A, EMMEGI TWIN ELECTRA SUN TU/6 double mitre saw Godpfsx Uyvzsx Aa Istt Note: The item can be collected from 16.02.2026 on a date to be arranged. FCA D-73529 Schwäbisch Gmünd – loaded onto truck

Condition: used, functionality: fully functional, mileage: 498,000 km, first registration: 01/1993, Year of construction: 1993, IVECO Magirus 330 with CIFA INVETTA 36 m concrete pump Gsdpfx Aaox Uyu Rj Istt First registration 1993 – Euro 1 498,000 km 7,836 operating hours CIFA INVETTA 36x equipment Tyres 40/50% Good condition Available immediately WE CONSIDER TRADE-INS FOR VEHICLES OF ALL BRANDS (MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA) WITH CIFA, SERMAC, PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY (CATERPILLAR, FIAT HITACHI, KOMATSU)

Condition: used, functionality: fully functional, mileage: 357,000 km, first registration: 08/2014, Year of construction: 2014, MERCEDES AROCS 3351 truck with tipper and crane behind the cab First registered August 12, 2014 – Euro 6 3 axles TKE three-way tipper body HIAB XS288 E6 HI PRO crane behind the cab 357,000 km 60/70% tyres Valid inspection In good condition Available immediately Godex Uyuqepfx Aa Istt WE CONSIDER TRADE-INS FOR VEHICLES OF ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, WITH CIFA, SERMAC, PUTZMEISTER EQUIPMENT, OR CATERPILLAR, FIAT HITACHI, KOMATSU EARTH-MOVING MACHINES

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 66.7 kW (90.69 HP), type of cooling: air, overall weight: 1,060 kg, total width: 1,100 mm, total length: 2,600 mm, total height: 2,400 mm, warranty duration: 6 months, heating capacity: 49.4 kW (67.17 HP), Aircooled chiller/Heat pump CLIMAVENETA MEHP IS G07 0082 66.7 kW/49.4 kW Cooling capacity: 66.7 kW / 18.97 tons (12/7 — 35°C) Heating capacity: 49.4 kW / 14.05 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Hydraulic module. Kiplink. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi BVK110FBAMT (scroll, inverter) + 1 pcs. Mitsubishi BV110YBAMT (scroll) Type of refrigerant: R32 Number of fans: 3 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Grundfos MGE80A 1-56C-IA-110 (Frequency inverter) Gedpsx Uyudofx Aa Iett Dimensions: 2.6x1.1x2.4 m Weight: 1060 kg Working hours: 0/0 h. Condition: New

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: M275930, cutting length (max.): 6,000 mm, total length: 9,000 mm, total width: 2,000 mm, total height: 2,000 mm, input voltage: 400 V, rotational speed (max.): 2,820 rpm, overall weight: 3,500 kg, power: 7.7 kW (10.47 HP), input frequency: 50 Hz, input current: 19 A, EMMEGI COMBI 5 AXIS STAR TU/6 Double Mitre Saw Attention: The item can be collected from 16.02.2026 onwards, with the specific pickup date to be agreed upon. Gtodox Uyr Njpfx Aa Iet FCA D-73529 Schwäbisch Gmünd – loaded onto truck

Condition: good (used), functionality: fully functional, Year of construction: 1994, machine/vehicle number: 94094175, sheet thickness (max.): 6 mm, input voltage: 380 V, overall weight: 7,000 kg, total length: 3,500 mm, total width: 2,200 mm, total height: 1,600 mm, HACO TS 3006 Guillotine Shear - Max. sheet thickness: 600 mm - Max. sheet width: approx. 3200 mm Note: The item can be collected from 16.02.2026 on a date to be agreed. Gedpfx Aajx Uymme Iett FCA D-73529 Schwäbisch Gmünd – loaded onto truck

Condition: used, Year of construction: 2018, 6 x Stork injection moulding machines Machine type Commissioning Age in months 4400-2150 19/12/2002 278 4400-2150 28/11/2012 159 4400-2150 14/08/2015 126 6600-5650 01/11/2011 171 9000-5650 30/05/2014 141 9000-5650 01/11/2018 87 Gtedpjx Uymaofx Aa Ijt

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details measuring range X-axis 400 mm measuring range Y-axis 400 mm diameter max. 350 mm weight of the machine ca. 420 kg dimensions of the machine ca. 1,23 x 0,75 x 1,91 m Additional information Used Tool Presetter in very good condition. Checked by a service engineer from SPERONI. Test report available. Gjdpfxjx Uyl Ns Aa Iett Automatic measuring Pneumatically Activated Axis Movement Spindle Disk Brake Camera CCD LCD Monitor 22" Label Printer DYMO 1 off toolholder for HSK 32 Other tool holders in other sizes are available from the manufacturer. Axis Resolution 1µ Software: Speroni Pro Vision PC DELL Optiplex GX 745 – Pentium Dual-Core CPU E 5200 / 2,50 GHz, 1,00 GB RAM (PC was changed approx. 5 years ago) Optionally, the following adapter can be obtained from the manufacturer: ISO 40 holder HSK 63 A/C holder

Condition: good (used), Stock number: 2852 Manufacturer: Poland Year of manufacture: 1974 Gedpfx Aajx Uykxs Istt Machine number: 33891 Type / Model: TUD 50 Centre distance: 2,000 mm Spindle bore: 56 mm Centre height: 250 mm Swing over bed: 500 mm over cross slide: 300 mm Speed range: 18 to 1,800 rpm Longitudinal feed: 0.08 to 3.26 mm/rev Cross feed: 0.04 to 1.63 mm/rev Power connection: 7.5 kW Accessories/Equipment: 3-jaw chuck Condition: good Weight: approx. 3.5 t Dimensions: 3,500 x 1,150 x 1,600 mm

Condition: used, mileage: 680,740 km, power: 338 kW (459.55 HP), first registration: 10/2015, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 7,000 mm, fuel: diesel, brakes: engine braking, color: yellow, gearing type: automatic, emission class: euro6, suspension: other, total length: 9,650 mm, total width: 2,550 mm, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Jaw coupling - Hub reduction - PTO - Radio - Reversing camera - Sun visor - Toolbox = Notes = Hooklift: VDL S-40-6100 Gtedpjx Uyhkjfx Aa Ist 40,000 kg Length: 600 cm Length with extended bumper: 675 cm Quick coupler for container Crane: Palfinger Epsilon Type: Q170Z84TI 3.00 m - 5,290 kg 4.00 m - 3,980 kg 5.00 m - 3,170 kg 6.00 m - 2,640 kg 7.00 m - 2,210 kg 8.00 m - 1,550 kg = Further Information = Technical Specifications Number of cylinders: 6 Axle configuration Brakes: drum brakes Front axle 1: Tire size: 385/65R22.5; Steering axle; Tread left: 30%; Tread right: 30%; Suspension: leaf suspension Front axle 2: Tire size: 385/65R22.5; Steering axle; Tread left: 25%; Tread right: 25%; Suspension: leaf suspension Rear axle 1: Tire size: 315/80R22.5; Twin tires; Tread inner left: 30%; Tread outer left: 30%; Tread inner right: 30%; Tread outer right: 30%; Suspension: hydraulic suspension Rear axle 2: Tire size: 315/80R22.5; Twin tires; Steering; Tread inner left: 30%; Tread outer left: 30%; Tread inner right: 30%; Tread outer right: 30%; Suspension: hydraulic suspension Weights Unladen weight: 20,000 kg Payload: 22,000 kg gross vehicle weight (GVW): 42,000 kg Functional Crane: Palfinger Maintenance APK (periodic technical inspection): certified until 11/2026 Identification Type number: X6 4242 CTSE 8x4 / 40T HOOKLIFT + = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Russian spoken. We strive to provide accurate information, but no rights can be derived from the texts provided.

Condition: new, Year of construction: 2017, functionality: fully functional, cooling capacity: 16 kW (21.75 HP), type of cooling: air, overall weight: 227 kg, total width: 700 mm, total length: 1,100 mm, total height: 1,400 mm, warranty duration: 6 months, heating capacity: 18 kW (24.47 HP), Aircooled chiller/heat pump Blue Box Epsilon Echos 16 kW / 18 kW Cooling capacity: 16 kW (12/7 — 35°C) Heating capacity: 18 kW (40/45 — 7°C) Year of manufacture: 2017 Options: heat pump Heat exchanger: plate Gjdpfxjx Uyf Aj Aa Istt Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Siam ( scroll, inverter) Type of refrigerant: R410A Number of fans: 2 pcs. Dimensions: 1.10 x 0.70 x 1.40 m Weight: 227 kg Working hours: 268 h Condition: excellent, new

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 2443818, load capacity: 454 kg, lifting height: 13,610 mm, platform length: 910 mm, platform width: 2,440 mm, overall weight: 8,623 kg, transport length: 9,470 mm, transport width: 2,480 mm, transport height: 2,590 mm, fuel type: diesel, color: blue, Equipment: UVV, Technical specifications Year of manufacture: 2018 Engine: diesel Working height: 15.61 m Platform height: 13.661 m Platform dimensions (L x W x H): 0.91 m x 2.44 m x 2.59 m Overall dimensions (L x W x H): 9.47 m x 2.48 m x 2.59 m Load capacity: 454 kg Slewing range: 160° Basket arm length: 1.52 m Gtedpfx Aox Uylvea Iot Driving speed: 1.1 - 3.28 km/h Climbing ability: 45% Weight: 8,623 kg Overall condition: typical used condition, UVV

Condition: excellent (used), functionality: fully functional, Drilling machines for turned parts TRIADE FR-3 V-V Gtjdpfx Asx Uyfpea Ijt

Condition: used, Year of construction: 2021, operating hours: 729 h, 2021 | FAE PT475 Forestry Mower / Tracked Carrier with Mulcher | Used Forestry Mower | 729 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 470000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 64 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is in very good condition, but the Linguet on the winch hook is missing. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38548 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? Gedpsx Uyfijfx Aa Iott We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, SCM Sandya 600 RCS 110 Wide-Belt Calibrating and Fine Sanding Machine The advanced sanding center for calibration, solid wood sanding, and fine veneer sanding TOP Equipment 1. Calibrating sanding unit with RA angled-grooved steel contact roller 2. Combination sanding unit with contact roller, 140 mm diameter, 85 Shore hardness, elastic MESAR sectional sanding pad with sector-wise electronic control Working width 1100 mm Main motor power 15 kW Version "B" for RCS Godpfx Aaox Uyfco Iett MESAR elastic sectional sanding pad electronic programming unit "LOGIC SC screen control" electrically adjustable working height with automatic workpiece detection Roller table in infeed and outfeed for long workpieces Machine from a small workshop / LEASE REPOSSESSION First delivery 2017 available from stock Lieboch

Condition: good (used), Year of construction: 2001, functionality: fully functional, Technical details grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Control SIEMENS 840 D magnetic clamping plate 4200 x 1300 mm segment head diameter 1400 mm grinding motor turning speeds up to 320 U/min. grinding motor 306 kW Godpfex Uyd Ssx Aa Iett weight of the machine ca. 50,0 t Additional information Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: * CNC-control SIEMENS Sinumerik 840 D * Automatic hydr. swivelling of the grinding motor from hollow to cross grinding * NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. * Dresser with adjustment axis in the machine bed * Coolant system * Electro-magnetic table * Switch cabinet * Oil mist extraction * Documentation Dimensions (length x width x height) Bed: 11800x2200x1400 mm, weight 27500 kg Grinding head: 3000 x 2500 x 3100 mm, estimated weight 14 t 2 x Oil mist extraction: 1200 x 800 x 2000 mm each Control panel: 1200 x 800 x 400 mm Small control cabinet: 1400 x 1400 x 800 mm 2 x gears each 1200 x 800 x 500 mm Control cabinet: 1600 x 800 x 2000 mm Control cabinet: 3400 x 600 x 2400 mm

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: CAI710777, power: 7.5 kW (10.20 HP), operating pressure: 9 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The Atlas Copco GA7 FF lubricated compressor is an ideal solution for businesses seeking reliability and efficiency in their operations. Designed by Atlas Copco, this pre-owned model delivers a power output of 7.5 kW, ensuring robust performance suitable for a wide range of industrial applications. Operating at a maximum pressure of 9.75 bar, the GA7 FF can meet the demanding requirements of your pneumatic system. The rugged construction of this equipment ensures long service life and optimal operation, even in challenging environments. Its compact design enables easy integration into most facilities without the need for major modifications. This Atlas Copco compressor stands out for its ability to reduce energy consumption while maintaining high production levels, ultimately helping to lower operating costs. This product is a wise choice for those seeking reliable and high-performance equipment on the used machinery market. Gtsdpfx Aox Uydroa Ist

Condition: excellent (used), mileage: 200,000 km, first registration: 10/2022, fuel type: diesel, maximum load weight: 7,500 kg, fuel: diesel, color: white, emission class: euro6, number of seats: 3, Equipment: ABS, Bluetooth, air conditioning, airbag, onboard computer, power mirror, spoiler, GUARANTEED USED VEHICLE!!! Contact: For further information call: 3441197960 – 030933077 Franco / Nicola Follow us on Facebook and Instagram. Specifications: Gjdpfx Aex Uybdoa Istt EXCELLENT IVECO EUROCARGO 75E21P CURTAIN SIDED WITH SLIDING TARPAULIN AND TAIL LIFT, EURO 6D Supplied features: ABS, Airbag, Electric windows, Radio, Board computer, Central locking, Traction control, Air conditioning, ESP, CD player, MP3, Suspension seat, Power steering, Steering wheel controls. Internal dimensions (mm): Length 6060 Width 2490 Height 2450 Rossini Service: Founded in 1960 as a FIAT / OM workshop, since 1992 Rossini Service is an ISO-certified authorized IVECO workshop. Our qualified and specialized staff have decades of experience in repairing and servicing passenger cars and commercial vehicles of all manufacturers. Each Rossini Service vehicle is thoroughly inspected and prepared before delivery.