Powder Process Design Services Ltd

Condition: used, Used LABOR-PILOT 2000/4 type in stainless steel-NR 03-4470H-Manufactured in 2003-With LABOR PILOT CONTROLLER-3 x 380 Volts-On mobile frame Fgodpfxsxlgkwo Afpsh

Condition: used, Used Christy Turner hammer mill model LB7. Infeed is 252mm dia by 295mm length. Unit driven by 15kW, 1460rpm motor. Rotor housing is 205mm diameter by 400mm long. Unit has mild steel blunt swinging hammers approximately 10mm thick. Includes discharge hopper. All mounted on a mild steel stand. Weight: Estimated: Lbs250.0 Fedpfx Afjxlgg Sopjgh Dimensions: 700 X 1450

Condition: used, Hollow body granulator and secondary granulator for pre-shredded material. Rotor diameter 450 mm Rotor width 600 mm Fodpfx Ajxgrx Nofpogh 3 rotor knives (diagonal cut), 2 stator knives Drive motor 22 kw

Condition: used, The Herbold PU 500 pulverizer is suitable for fine grinding of plastics and soft to medium-hard materials. Drive power 55 kw Fedpfxjxgrqfe Afpegh Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Condition: used, Multiple knife mill / granulator with rotor with 16 knives Fsdpjxgrn Rsfx Afpjgh 6 stator knives Drive 90 kW With equipment

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required Fgsdpfexgrnqex Afpsh With feed device (pendulum arm) Drive power: 90–200 kW

Condition: used, Drive 37kw (ca be changed to max. 75 kw) Fjdoxgrgyopfx Afpsgh rotor diameter 500 mm rotor width 600 mm 5 knive scissor cut, housing hingeable, with 2 stator knives Opening inlet 500 x 600 mm

Condition: used, power: 160 kW (217.54 HP), Cutting mill TRIA 120-80 FN / Cutting mills New hydraulics, new knives, new bearings Drive: 160.0 kW Rotor knives: 7x2 Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Inlet: 800 x 1200 mm Fjdpfx Aexgrfvsfpegh

Condition: used, Condux Granulator type CS 300/600-4 WK Rotor diameter: 300 mm Rotor width: 600 mm Rotor knives: 3 Housing with 4 stator knives Drive motor 11 kW (on request max. 30 kW) Fgedpfxoxgrfij Afpoh

Condition: used, Drive motor 37 kW (can be increased to 75 kW) Fgjdpoxgrd Eofx Afpeh Rotor diameter: 500 mm Rotor width: 600 mm Inlet opening: 500 x 600 mm 5 knives, diagonal cut Hinged housing, with 2 stator knives.

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size Fsdpjxgrdfjfx Afpjgh

Condition: used, Cutting mill / cutting mills Manufacturer: HERBOLD MECKESHEIM Fgsdpfxjxgq Uce Afpjh Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Condition: used, HERBOLD single-shaft shredder EWS 45/200 With pressing device (pendulum arm) Working width 2000 mm Fedpfxoxgq S Ue Afpsgh Rotor diameter 450 mm Drive 2 x 90 kW Machine in very good condition, ready for operation

Condition: used, Used Alpine Model 630AFG stainless steel Aeroplex fluidized bed opposed jet milling system. Stainless steel classifier wheel belt driven by 15kw, 400/690volt, 2/50, 2940rpm motor. Unit includes (4) jet nozzles. Includes product feeding vessel approx 230 litre capacity with stainless steel screw feeder driven by 1.5kw, 400volt, 3/50, 1440rpm motor. Unit all mounted on common mild steel frame. Specifications: Motor Power: 20.1 hp Fgjdpfxoxgftms Afpoh

Condition: used, Used JetPharma Model MC JetMill50 stainless steel mobile jet mill. Process gas maximum pressure 12 bar at 0 to 50 deg.c. Mounted on stainless stand. Fsdjxdw H Tjpfx Afpegh Specifications: Grinding Air Pressure: 174 PSI

Year of construction: 2021, condition: like new (used), functionality: fully functional, machine/vehicle number: 100654, Rematec 800 hammer mill Fgodpfx Ajxb Dhlefpeh As good as new with low operating hours Recently overhauled Double number of hammers (436 pieces) Included: Feed screw Magnet Discharge screw Spare hammers Frame Frequency inverter

Condition: used, Granulator / Granulators Manufacturer: HERBOLD Model: SMS 45/100-H5-3 Feed opening: 600 x 980 mm Rotor: 450 mm diameter x 980 mm width Fedpoxb Aggjfx Afpjgh 5 rotor knives, 3 stator knives Double inclined cut Drive motor: 75 kW Tiltable machine housing Externally mounted rotor bearings Pre-adjustable knives Hopper for manual or conveyor belt feeding

Condition: used, Year of construction: 1976, functionality: unexamined, machine/vehicle number: TM5, input voltage: 380 V, Used Molteni Milano TM5 Multipurpose Mixer Manufacturer: Molteni Milano Model: TM5 Voltage: 380 Volt Fedpfxew H I Tls Afpegh Last inspection: June 2017 Year of manufacture: 1976

Condition: used, functionality: unexamined, machine/vehicle number: Pulverisette 05102, Used Fritsch Pulverisette ball mill with cabinet and accessories Manufacturer: Fritsch Model: Pulverisette 05102 Fgedpfsw Hct Hex Afpeh Voltage: 220V Includes mobile cabinet with contents

Year of construction: 2006, condition: excellent (used), Used Tietjen GD12 ex Atex Hammer Mill Including 200kW 1500 rpm motor (other options possible upon request) Year of manufacture: 2006 Atex compliant Fgodpfow Dv Aisx Afpjh Including DA576 feeder Magnetic separator and air gravity separator

Year of construction: 1999, condition: good (used), Wijnveen GHM 1250 Total width of grinding chamber: 1250 mm 150 kW motor with 1500 rpm (other motors available upon request) Fedpfx Aow Dv Acjfpjgh 1000 mm + 250 mm configuration for various screen perforations for coarse/fine grinding as desired. Including feeder with magnet Refurbished in 2014

Year of construction: 2024, condition: new, functionality: fully functional, Hosokawa Alpine MZM 1-40 classifier system by Alpine Rentals. Fgedpfxowxwwks Afpsh Stand-alone lab scale air classifier, perfect for highly precise separation of small batches into a coarse and fine fraction. Adjustable cutting point, ranging from 0,1 to approx. 6 mm. Can be used for sorting and separating different materials. Thanks to the plexiglass cover it is ideal to observe the classification process inside the classifying tube. Technical details Stainless steel, plexiglass and glass Non ATEX, Non Pressure Shock Resistant (NPSR) Air flow 6-60m³/h Throughput approx. 3-30kg/h Maximum feed size approx. 10mm Scope of supply Hosokawa Alpine MZM 1-40 zigzag classifier complete with supporting frame, including feeding bin, cyclone, glass collecting bottles and vacuum cleaner. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 2800245-10, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, Fsdpjwxd Icefx Afpjgh for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: ready for operation (used), An old rectangular ball mill for barrel and dip finishing of mass-produced articles is available. Process: Deslagging/deburring, filling weight range: approx. 30kg-50kg, drive: belt-driven, machine length: approx. 1200mm. On-site inspection is possible. Fedpfx Afswut E Aspogh

Condition: used, Hammer mill Rematec Fsdpfxewpgace Afpogh Power: 75 kW Manufacturer: Rematec Model: RPM 650