Used Mark Dryer for sale (27)

Condition: used, Year of construction: 2010, operating hours: 75,774 h, functionality: fully functional, Used Mark compressor with dryer. Used, in working condition. Available at the end of July 2025. Guodpowprvisfx Afpoh

Year of construction: 2007, condition: good (used), max. compressed air: 13 bar Guodpfx Afsd E S H Eepeh capacity: 390 m³/h max. inside temperature: 55°C max. outside temperature: 43°C electr. drive: 220 V, 1,64 kW weight: 80 kg space requirement: 600 x 600 x 1000 mm

Year of construction: 2009, condition: used, Used machine environmentally friendly due to the use of R404A Energy savings thanks to rotary refrigerant compressor (20-30% more efficient than conventional piston models) intelligent condensate drainage max. operating pressure 13 bar Gsdpow Rhi Tofx Afpjuh treated compressed air output 5,200 l/min, 7,312 m²/h Motor power 1.58 kW, 230 V max. inlet temperature 55°C Dimensions 557 x 460 x 789 mm Availability: short-term Location: Flörsheim

Condition: good (used), Year of construction: 2006, Compressed air dryer, refrigeration dryer, dryer, compressed air refrigeration dryer -Drying capacity 1200 L / min -Max. Pressure: 13 bar Godsd R N H Tepfx Afpouh -Operating voltage: 240 V -Dimensions: 485/350 / H450 mm -Weight: 23.5 kg

Condition: good (used), Year of construction: 2014, operating hours: 15,792 h, functionality: fully functional, machine/vehicle number: DRY(C55)A3 5015, overall weight: 310 kg, total length: 1,535 mm, total width: 665 mm, total height: 1,550 mm, power: 7.5 kW (10.20 HP), fuel type: electric, fuel tank capacity: 270 l, operating pressure: 13 bar, pressure (min.): 13 bar, pressure (max.): 13 bar, noise level: 64 dB, type of cooling: air, Equipment: refrigerant dryer, Very good compressor with refrigeration dryer Gjdevtn Azjpfx Afpsuh

Year of construction: 2018, condition: refurbished (used), Digital hybrid press with 4 color digital + one Flexo UV LED Station + die cutting station + laminate + Cold Stamping Width: 330mm 4x charge corona unit 4x drums 2x fuser belt 1x belt cleaning blade 3x 2nd transfer upper roll 1x fusing roll 2x setting toner No 2 1x set of steal gears for Konica Minolta printing unit 1x sheet one assy 1x suction dustproof filter 1x 2nd transfer earth plate 1x set of fuser heat insulting sleeves 2x waste toner Gsdjh Ug U Eopfx Afpeuh 3x Teknek cleaning rolls (web cleaning system) 1x FUSER UNIT (used working well spare part) + Magnetic Cylinders from Rotometal company • Die Cutting – 9,10,11,12,13,14,15 Inch • Printingcylinder– 12,13,11 Inch

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: siehe Bilder, Screw compressor in technically and visually good condition, due to low operating hours. External 500L tank (Atlas Copco) with filter. Gjdpoxcxb Nofx Afpsuh

Condition: excellent (used), Year of construction: 2023, Mark MSM5.5 Year of manufacture 2023 Power (kW): 5.5 Gusdjw Ahwpopfx Afpeh Operating pressure: 10 bar Weight: 185 kg

Condition: excellent (used), Year of construction: 2012, MARK MSM 3 screw compressor with air dryer mounted on a 200L tank, post-service Technical data: Capacity: 320 L/min; Motor power: 3 kW; Pressure: 10 bar; Operating hours: 3230h!!! Guedew Nn Umepfx Afpeh Year: 2012; Compressor is fully operational. Net price: 8,100 PLN Gross price: 9,963 PLN Video link below.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: API170347, overall weight: 1,570 kg, volume flow: 736.8 m³/h, pressure (max.): 10 bar, Equipment: type plate available, Compressor MARK RME75 S/N API170347 S002313 Compressor MARK Type RME75 Godjwn A Tvopfx Afpeuh S/N API170347 Year of manufacture: 2012 Power (kW): 75 kW Capacities (m/min): 12.28 Pressure (bar): 10 bar

Condition: ready for operation (used), Stainless steel vessel, Used machine Overall dimensions: 760 x 770 x 930 mm Weight: 119 kg Electrical data: 400V; 8 kW Material: Corrosion-resistant stainless steel Gjdpfou Hkrcex Afpsuh Year of manufacture: 2000 Vessel capacity: 60 liters Temperature range: 0-120 °C.

Condition: good (used), Year of construction: 2013, MARK ANDY XP 5000 / 13" - 4-color  Year: 2013  Webwidth: 330mm / 13" Godpfx Afetubz Uopouh Equipment:  UNWINDER  4 x FLEXO PRINTING  BST CAMERA  UV-DRYER  HOT AIR  1 x DIE-CUTTING GAPMASTER  1 x DIECUTTING GAPMASTER  100% TUBE SCAN CONTROL  REWINDER  Web edge control  Control Panel  Lot off printing/magnetic cylinder  Anilox Please contact me if you have any questions. Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)

Condition: good (used), Year of construction: 2006, Screw compressor MARK Gsdotx Aknepfx Afpouh Type: MAS 7,5KW Year 2006 Power 7,5KW Pressure : 10 Bar Dimensions: L100cm X W 62 cm X H 105 cm Weight: 215 KG Ready to use condition.

Year of construction: 2022, condition: excellent (used), Screw compressor Elmag / Mark MSM 4 D-270 AD 2000 m. ES 4000 Basic, year of manufacture 2022, 127 operating hours, 7489 standby switch-on hours, max. Operating pressure 10 bar, Effective delivery 516 l/min, with refrigerant dryer, Gjdpfxjma Hv So Afpouh

Condition: excellent (used), Year of construction: 2005, MARK MSA11 screw compressor, machine with air dryer on 500L tank after servicing Technical data: Capacity: 1400 L/min; Motor power: 11KW; Pressure: 13 bar; Operating hours: 4133h!!! Year: 2005; Compressor fully operational. Net price: 9500 PLN Gujdpfew Nn Tvsx Afpsh Gross price: 11685 PLN See video link below.

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: WCF300810, overall weight: 1,300 kg, volume flow: 1,029.6 m³/h, pressure (max.): 9.5 bar, Equipment: type plate available, PROD. Mark TYPE RME 110 IVR G7 AIR S/N WCF300810 YEAR 2006 CAPACITY (kW) 110 OUTPUT (m3/min) 17.16 Gedpfx Aewn Duzsfpouh CIS (bar) 9.5 INVERTER no BUILT-IN DRYER no EXCHANGER no COOLED (AIR/WATER) yes ON TANK no DOCUMENTS no NEW/USED USED

Condition: excellent (used), Year of construction: 2012, volume flow: 2.2 m³/h, pressure (min.): 8 bar, MARK MSA 15 IVR screw compressor Variable speed (inverter) Gsdpov A U I Aofx Afpouh 15 kw engine Efficiency 2.2 m3/min Pressure 8 bar Mileage 11285 mtg Fully functional compressor

Condition: good (used), MARK ANDY XP 5000 / 13"  Year: 2008 Gujdpfotubz Aex Afpeh  Webwidth: 330mm / 13" Equipment:  UNWINDER  7 x FLEXO PRINTING  Add. 1 x WATER COOLING  2 x DIE-CUTTING  LABELSHIFTER  BST CAMERA  UV-DRYER  REWINDER  Web edge Control  Control Panel  Optican for Sheeter  Lot off Printing/Magnetic Cylinder  Anilox

Year of construction: 2004, condition: excellent (used), MARK MSC37 37kw Wave Compressor!!! Screw compressor MARK MSC37 IVR (ATLAS COPCO screw stage) machine with inverter Technical data: capacity: 6,08 m3/min; Gedpoh Ngc Ejfx Afpeuh 37KW motor; pressure 8 bar; mileage 12942h!!! 2004; compressor fully operational. net price: 18500zł gross price: 22755zł

Condition: new, Year of construction: 2023, machine/vehicle number: ITJ781231, pressure: 10 bar, PRODUCT - MARK TYPE - MSM15D TM500 S/N - ITJ781231 YEAR - 2023 POWER (kW) - 15 OUTPUT. (m3/min) - 1.68 m3/min CIS (bar) - 10 BUILT. DRYER - yes ON TANK - 500L DOCUMENTS - YES Gedpjqiz Acefx Afpsuh

Condition: good (used), Year of construction: 2009, MARK ANDY LP 3000 - 10" We present this Mark Andy LP 3000, Flexopress max format 254 mm / 10', year of manufacture 2009. Machine details:  Year of construction: 2009  Printing process: 6 x flexo printing  Roll width: 254mm / 10'  2 x Die-Cutting  Unwinder  Rewinder  VESTRA TURRET REWINDER  Max. Material web width: 260.35mm / 10.25'  Min. print length: 177.8mm / 7'  Max. Print length: 609.6mm / 24'  Max. Speed: 230 m/min  Drying system: 6 x UV Dryer  Web monitoring: BST Power Scope 3000 mot. Guedpfx Afeumbl Eopjh  With analog screen on one side  Web break control  Turnbar  Machine dimension: 10,4m x 2,0m The machine is equipped with  Printingcylinder: 6x 68", 74", 80", 88", 100", 120", 124", 132"  Printingcylinder: 3x 90", 104", 2x 110", 112", 7 x 96"  10 x Anilox  Magnetic Cylinder: 80", 88", 96", 100", 102", 104", 108", 110", 112", 120", 124", 132", 134", 136", 148" Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 315 kg, volume flow: 85.2 m³/h, pressure (max.): 10 bar, hopper volume: 500 l, Equipment: documentation/manual, refrigerant dryer, type plate available, PROD. MARK TYPE MSM11 D TM500 S/N ITJ874644 YEAR 2024 CAPACITY (kW) 11 OUTPUT (m3/min) 1.42m3/min CIS (bar) 10 HRS (DOC/GENERAL) 0 INVERTER NO BUILT-IN DEHUMIDIFIER YES ON TANK YES 500L Guodpovrfdtofx Afpoh DOCUMENTS YES

Condition: good (used), Year of construction: 2006, MARK ANDY LP 3000 – 10” We present this Mark Andy LP 3000, Flexopress max format 254 mm / 10', year of manufacture 2006. Machine details:  Year of construction: 2006  Printing process: 6 x flexo printing Gjdpfx Ajwi Ttiefpeuh  Roll width: 254mm / 10’  2 x die cutting  6 x UV dryer  Hot Air  Gymnastics bar  Unwinder  Rewinders  Max. Material web width: 260.35mm / 10.25’  Min. print length: 177.8mm / 7’  Max. Print length: 609.6mm / 24’  Max. Speed: 230 m/min  Web break control The machine is equipped with  Printing cylinder:  Anilox  Magnetic Cylinder Technical and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 300 kg, volume flow: 60 m³/h, pressure (max.): 10 bar, tank capacity: 500 l, Equipment: documentation/manual, refrigerant dryer, type plate available, PROD. MARK TYPE MSM7.5D TM500 S/N ITJ874643 YEAR 2024 CAPACITY (kW) 7.5 OUTPUT (m3/min) 1 m3/min CIS (bar) 10 BUILT-IN DEHUMIDIFIER YES ON 500L TANK Gsdpfx Ajvrcucsfpouh DOCUMENTS YES NEW/USED NEW

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 330 kg, volume flow: 100.8 m³/h, pressure (max.): 10 bar, type of cooling: air, hopper volume: 500 l, Equipment: documentation/manual, refrigerant dryer, type plate available, PROD. MARK TYPE MSM15D TM500 S/N ITJ874646 YEAR 2024 Gedpfx Afovrcnvepeuh CAPACITY (kW) 15 OUTPUT (m3/min) 1.68 m3/min CIS (bar) 10 BUILT-IN DEHUMIDIFIER YES ON 500L TANK DOCUMENTS YES NEW/USED NEW