Jrs servis

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 7,000 rpm, travel distance X-axis: 630 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 415, number of axes: 3, This 3-axis HERMLE U 630 T was manufactured in 1999. It features a Heidenhain TNC 415 control system, ensuring precision and reliability in operation. The machine is in very good condition and fully operational. If you are looking to get high-quality milling capabilities, consider the HERMLE U 630 T universal milling machine we have for sale. Contact us for further details. Crodozbu I Dopfx Aipjc • Machine Type: Universal Milling Machine • Condition: Very good / Fully operational • Control System: Heidenhain TNC 415

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 6,000 rpm, travel distance X-axis: 850 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, number of axes: 3, This 3-axis RECKERMANN VMC 850 was manufactured in 1999. It features an internal coolant supply and is equipped with a Heidenhain TNC 430 control system, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the RECKERMANN VMC 850 universal machining centre we have for sale. Contact us for further details. Crsdpfx Aezbu Abjipjc • With internal coolant supply • Condition: Very good / Fully operational • Control System: Heidenhain TNC 430 Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 8,000 rpm, travel distance X-axis: 1,050 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530, number of axes: 3, This 3-axis RECKERMANN RBZ 1050 was manufactured in 2007. It features a Heidenhain TNC 530 control system, ensuring precision and reliability in operations. The machine is in very good condition and fully operational. If you are looking to get high-quality milling capabilities, consider the RECKERMANN RBZ 1050 universal milling machine we have for sale. Contact us for further details. • Condition: Very good / Fully operational • Control System: Heidenhain TNC 530 Crjdpfx Aszbuymoipjc

Condition: ready for operation (used), Year of construction: 1999, operating hours: 52,732 h, spindle speed (max.): 14,000 rpm, overall weight: 17,500 kg, table width: 700 mm, table length: 2,000 mm, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, table load: 1,200 kg, number of axes: 5, This 5-axis Huron EX-C was manufactured in 1999. It features a clamping surface of 2000 mm x 700 mm and a maximum table load capacity of 1200 kg. The machine offers impressive X-axis travel of 1600 mm, Y-axis travel of 800 mm, and Z-axis travel of 600 mm. If you are looking to get high-quality machining capabilities, consider the Huron EX-C universal machining centre we have for sale. Contact us for further details. - Spindle Taper: HSK-A 63- Work Feeds: 1-30000 mm/min- Rapid Feed: 30000 mm/min- Total Installed Power: 60 kW- Machine Weight: 17500 kg (18 Tonnes gross)- Short Circuit Power: 5.5 kW- Electrical Supply: 3 x 400 V- Frequency: 50 Hz- Maximum Power: 60 kW- Cable Cross Section: 35 mm²- Network Type: TN Schema- Coolant Tank: Included- Overhead Chip Conveyor: Included- Maintenance/Repair History:* 2025: Y-axis feed spindle with bearings and mounting parts replaced.* 2024: X-Y axis roller shoes replaced, X-axis linear guide replaced, geometry realigned, Z-axis roller shoes, Y-axis roller shoes. Csdpjzbr Unefx Aipsrc

Condition: ready for operation (used), Rivelica spray drilling machine, including a sharpening device for sinking tools, for sale in good condition! Crjdszbhf Aepfx Aipsc

Condition: used, Sunnen brand honing machine, model MBB 1400 EMS. Cjdpfxeza Hd Io Aiporc

Condition: ready for operation (used), Year of construction: 2020, operating hours: 4,726 h, spindle speed (max.): 15,000 rpm, travel distance X-axis: 900 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle motor power: 51,000 W, table load: 500 kg, number of slots in tool magazine: 90, number of axes: 5, This 5-axis Quaser UX630 was manufactured in 2020. It features a powerful HSTec HM-15A spindle with a speed of 15,000 rpm and a robust rotary/tilt table capable of handling workpieces up to Ø630 × 540 mm. The machine is equipped with a 90-position tool magazine and includes advanced options like a Renishaw 3D workpiece probe. If you are looking to get high-quality machining capabilities, consider the Quaser UX630 universal machining centre we have for sale. Contact us for further details. • 5-axis simultaneous machining; B-axis ±120°, C-axis 360° continuous • Spindle: HSTec HM-15A built-in, HSK-A63, 162 Nm • Rotary/tilt table: Peiseler (Germany), Direct Drive, Ø480 mm; max load 500 kg; max workpiece Ø630 × 540 mm • Control: Heidenhain TNC 640 with options DCM, Kinematics Opt, LAC, DNC (Opt. 18) • Tool magazine: 90 positions (HSK-A63) Cjdpfx Aeza E U Soipsrc • Through-spindle coolant: 20 bar • Heidenhain linear scales on all axes • Spindle operating hours: 4,726 • Note: Dust extractor shown in images is excluded Additional equipment • Renishaw 3D workpiece probe • Blum laser tool measurement • Schunk Vero-S zero-point clamping system • NP clamping system • BMO robot interface installed and programmed (robot not included) • HSK63 tooling included

Condition: ready for operation (used), Year of construction: 1969, Immediately available ex location: Hydraulic Vertical Honing Machine Nagel Type VS 8 – 50 / S Year of manufacture: 1969 Honing diameter: 10 – 120 mm Honing length: 10 – 750 mm Codpfx Aiozap T Espjrc Table clamping surface: 920 x 350 mm Throat depth: 440 mm Automatic feed Complete set of honing tools, honing heads from 10 – 120 mm, honing mandrels, clamping pots Spindle drive: 4 HP Spindle rotation: 3 HP Weight: 5 tons Priced at EUR 4,500.— plus VAT ex location

Condition: like new (used), The Supfina 200 superfinishing device is an attachment for processing cylindrical shafts using stone finishing techniques. It is suitable for machining pre-ground or finely turned surfaces. The device performs an oscillating motion; workpiece infeed is realized via a pneumatic cylinder or via the lathe’s support. Its easy mounting on a lathe makes the Supfina 200 superfinishing device particularly suited for repair operations, single-part production, and small batch manufacturing. The device is very robust, making it well-suited for continuous and multi-shift operation. The oscillation stroke, infinitely adjustable between 0 and 5 mm, remains almost constant even under load. This allows grooving operations between shoulders to be carried out cleanly and without overlapping stroke, even with narrow reliefs (less than 1 mm). For economical machining, diameters from 1 to 300 mm are recommended for short workpieces. Cedpfx Ajzaipteipjrc

Condition: excellent (used), functionality: fully functional, The Supfina Type 110 superfinishing unit is an attachment for stone finishing. Designed for mounting on small to medium-sized carrier machines for finishing ground or finely turned surfaces. Vibration frequency 2000 – 2200 rpm Stroke 3–5 mm Required pneumatic pressure 4 bar Weight 12 kg The superfinish attachment has been cleaned and inspected. It is in very good condition Csdoy U Uguopfx Aipsrc

Condition: used, Year of construction: 2002, honing diameter 200 mm stroke 600 mm Cjdpfxey Umato Aiporc 2 Honing spindles -both with two step expansions mechanic/hydraulic -Rotary table with 4 stations. 2 x 180° or 4 x 90° -air gage measuring made for honing liners with max diameter 120mm Machine is like new because it worked only few months.

Condition: new, Year of construction: 2026, functionality: fully functional, Nebes L125 - New, adjustable belt sander Made in Italy Belt: 1500 x 120 mm Technical specifications of the NEBES L125 belt sander: Belt dimensions: 1500 x 120 mm No-load speed: 1400 rpm Csdpfxjy Takcj Aipsrc Belt speed: 15 m/s Table dimensions: 410 x 185 mm Diameter and number of teeth of the milling cutter: Ø 180 mm - Z 120 Noise level: 70 dB Number of dust extraction outlets: 1 Power supply: 400 V 50 Hz Motor power: 750 W Packaging dimensions: 450 x 830 x 1050 h mm Net weight: 65 kg

Condition: good (used), Year of construction: 2012, travel distance X-axis: 1,800 mm, travel distance Y-axis: 700 mm, Vertical Machining Center Machine type: DMG DMF 180|7 Control system: Siemens 840 D solutionline Year of manufacture: 2012 TECHNICAL DATA: Travel distances: X-axis: 1,800 mm Y-axis: 700 mm Z-axis: 700 mm Feed rate (X/Y/Z): 40 m/min Rapid traverse (X/Y/Z): 40 m/min Spindle speed range: 20 - 14,000 rpm Spindle motor: 18.9 / 14 kW Tool holder: SK 40 Tool positions: 30 Table size: 2,100 x 700 mm Crsdpfxoy Rk Nwj Aipec Max. workpiece weight: 1,500 kg Workpiece height: 550 mm Connected load: 19 kW Space requirement (LxWxH): 5.533 x 4.231 x 2.693 m Machine weight: 13,000 kg Features: Chip conveyor

Condition: good (used), Year of construction: 1969, functionality: fully functional, Used vintage electric forklift Make/Brand: PEG Model: F1040 EB Year of manufacture: approx. 1969-1970 Load capacity: 1,000 kg at 400 mm load center Lift height: approx. 3.30 m Unladen weight: approx. 1,540 kg Cjdpoy Rdvwofx Aiperc with charger

Condition: ready for operation (used), Year of construction: 2015, operating hours: 11,223 h, spindle speed (max.): 20,000 rpm, total height: 800 mm, table width: 650 mm, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 75 MonoBlock was manufactured in 2015. It features an X-axis travel of 750 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine is equipped with a spindle speed of 20,000 rpm and a tool magazine with 60 positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 75 MonoBlock universal machining centre we have for sale. Contact us for further details. • 5-axis simultaneous machining • Spindle taper: SK 40 • Tool magazine: 60 positions • Internal coolant supply: 40 bar • Spindle Hours: 11,223 h • Machine on hours: 32,851 h • A-axis Range: +/- 120 degree • C-axis Range: 360 degree • Table: Integrated CNC rotary table (diameter 650 mm) within an 800 x 650 mm table surface • Clamping: Hydraulic clamping for the swivel rotary table • Probing: HEIDENHAIN touch probe • Chip Management: Chip conveyor • Coolant: Internal Coolant Supply (ICS / IKZ) 40 bar • Coolant Tank: 600-liter capacity with paper band filter • Cleaning: Wash-down gun (spray pistol) • Extraction: Extraction unit (mist collector) • Table type: Integrated swivel rotary table Additional equipment • Infrared measuring probe • Electronic handwheel • Chip conveyor • Internal coolant supply system with paper band filter • 3D Quickset preparation Cjdpsy Ndg Tefx Aipsrc • Coolant ring nozzle • Air blast • Operating Mode 4 (BA4) • Safety glass window • DMG Netservice client • Optional: approx. 80 tools available Technical Specification Through-spindle Coolant Yes Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2002, operating hours: 3,875 h, spindle speed (max.): 10,000 rpm, total height: 2,950 mm, total width: 2,200 mm, overall weight: 9,000 kg, travel distance X-axis: 700 mm, travel distance Y-axis: 590 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530, product length (max.): 2,650 mm, number of slots in tool magazine: 32, number of axes: 5, This 5-axis Quaser MV204U/10 was manufactured in 2002. It features an impressive XYZ travel of 700 x 590 x 400 mm and a maximum spindle speed of 10,000 rpm. The machine is equipped with a 32-tool automatic tool changer and a Heidenhain iTNC530 control system. If you are looking to get high-quality machining capabilities, consider the Quaser MV204U/10 universal machining centre we have for sale. Contact us for further details. Codpfxey Nbg De Aiperc • Rotary axes: A ±110°, C 360° • Through-spindle coolant: 20 bar Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2005, operating hours: 16,700 h, spindle speed (max.): 6,300 rpm, total height: 2,750 mm, overall weight: 10,200 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle motor power: 16,000 W, product length (max.): 6,600 mm, table load: 600 kg, number of axes: 5, This 5-axis DECKEL MAHO DMU 80P hi-dyn was manufactured in 2005. It features impressive travels of 800 mm in X, 700 mm in Y, and 600 mm in Z. The machine is equipped with a Heidenhain iTNC 530 control and a maximum spindle speed of 6,300 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 80P hi-dyn universal machining centre we have for sale. Contact us for further details. Codpfx Aoy I Aqujipsrc • Spindle torque: 475 Nm (40% DC) • Tool changer: 60 positions (chain magazine) • Rapid traverse (X/Y/Z): 50 m/min • Feed rate (X/Y/Z): 50,000 mm/min • Table: NC swivel rotary table (d 630 mm) • Swivel range: -45° to +30° • Cooling: 40 bar internal coolant supply (IKZ) through spindle center • Power consumption: 50 kVA • Defect: Transmission damage Additional equipment • Chip conveyor: Scraper belt type, discharge height 956 mm Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2023, machine/vehicle number: 855-23-01, spindle speed (min.): 10 rpm, spindle speed (max.): 250 rpm, total height: 1,600 mm, total width: 2,500 mm, total length: 11,000 mm, overall weight: 4,000 kg, rotational speed (min.): 416 rpm, rotational speed (max.): 250 rpm, Machine Data Installation dimensions: approx. 10000 × 2500 × 1600 mm Weight: approx. 3000 kg Capacity Max. outside diameter: 650 mm Max. stroke/travel: 4500 mm Max. honing length: 4000 mm Performance Data Speed: 10–250 rpm Drive power (rotary): 4 kW Stroke speed: 1–25 m/min Drive power (stroke): 3 kW Pneumatic Data Air pressure (min.): 5 bar Air pressure (max.): 9 bar System: pneumatic feed unit (automatic friction control) Control / Technology HMI: SIMATIC HMI Technical Data Csdsy H I Ipjpfx Aipsrc Voltage: 400 VAC Control voltage: 24 VDC Frequency: 50 Hz Connected load: 63 A Conformity: CE Cooling System Tank capacity: 1000 l with filtration system Weights Net weight: approx. 3500 kg Gross weight: approx. 4000 kg Transport Dimensions Dimensions: approx. 11000 × 1000 × 2100 mm

Condition: ready for operation (used), Year of construction: 1989, operating hours: 38,800 h, spindle speed (max.): 4,000 rpm, total height: 2,995 mm, total width: 3,650 mm, overall weight: 15,100 kg, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle motor power: 22,500 W, product length (max.): 4,330 mm, tool weight: 15,000 g, number of axes: 3, This 3-axis MAHO 1600S universal machining centre was manufactured in 1989. It has approximately 38,800 machine hours and was operational until 2025 without notable issues. The machine features a functional coolant system and comes with available manuals and documentation. If you are looking to get high-quality machining capabilities, consider the MAHO 1600S machine we have for sale. Contact us for further details. • Main spindle drive power kW 22.5 • Tool interface ISO 50 • Tool clamping force kN 23 • Spindle speed range rpm 20–4000 • Spindle speed override % 80–120 • Feed rate X Y Z mm/min 1–4000 • Minimum programmable feed mm/min 0.01 • Rapid traverse m/min 10 • Feed and rapid override % 0–140 • Tool holder ISO 7388 Type B • Max tool diameter mm 160/210 • Max tool diameter adjacent free mm 125 • Max tool length mm 400 • Machine weight with tool changer kg 15500 • Max tool weight kg 15 • Compressed air approx bar 7 • Table size mm 980×1800 • T-slot spacing mm 100 • Max workpiece weight kg 3000 • Voltage V 220/380 • Frequency Hz 50 • Total connected load kVA 37.5 • Total load with coolant kVA 45.0 • Positioning resolution mm 0.001 • Last operational year 2025 Cjdpfxoy Hizwj Aipjrc • Condition ran until 2025 without notable issues • Documentation manuals available • Coolant system available functional • Tool changer/chain magazine not present/ included

Condition: ready for operation (used), Year of construction: 1985, operating hours: 29,192 h, spindle speed (max.): 4,000 rpm, total height: 2,988 mm, total width: 4,288 mm, overall weight: 9,000 kg, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, product length (max.): 4,152 mm, number of axes: 3, This 3-axis MAHO MH 1000 C/A was manufactured in 1985. It has approximately 29,192 machine hours and includes manuals and documentation. The protective doors are partially disassembled but included. If you are looking to get high-quality machining capabilities, consider the MAHO MH 1000 C/A universal machining centre we have for sale. Contact us for further details. Tool interface ISO 50Quill stroke vertical spindle mm 100Spindle speed range rpm 20–4000Spindle speed override % 80–120Feed rate X Y Z mm/min 1–4000Feed force X Z N 8000Feed force Y N 24000Rapid traverse m/min 10Feed and rapid override % 0–140Table diameter mm 1250Table length mm 800Center bore mm 42 H7T-slots 7T-slot spacing mm 100Manual cross adjustment mm 275Table indexing ratio 1:120Table rotation per handwheel turn deg 3Table rotation per division deg 2Positioning resolution deg 0.001Increment per division mm 0.026Table swivel X-axis deg ±30Table swivel Y-axis deg ±30Table rotation deg 360Table clamping pressure bar 80Max table load kg 800Table weight kg 1100Frequency Hz 50Total connected load kVA 36Total load with coolant kVA 41Total load with coolant and tool changer kVA 46Positioning resolution mm 0.001Machine hours approx h 29192Condition currently idle not in operationDocumentation manuals availableProtective doors partially disassembled includedIncluded accessories none tool holders not includedTable axis one axis manual only not referenceable error present Credpfjy Hizqox Aipjc

Condition: like new (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2D1-1116, total height: 1,905 mm, total width: 1,626 mm, total length: 1,219 mm, overall weight: 725 kg, For sale: as new, barely used, highly precise (±0.001 mm) automatic hole honing machine, sold together with numerous precision instruments, measuring devices, and extensive accessories for honing bores from D6 to D25 mm. The machine is connected to the power supply and ready for immediate operation. Credpjy E N R Njfx Aipjc

Condition: ready for operation (used), Year of construction: 2011, operating hours: 34,062 h, spindle speed (max.): 10,000 rpm, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle motor power: 44,000 W, number of axes: 5, This 5-axis DMG DMC80U DuoBlock was manufactured in 2011. It features a maximum workpiece diameter of 800 mm and a height of 600 mm, with a load capacity of 800 kg per pallet. The machine is equipped with a dual pallet system and a rapid traverse rate of 60 m/min. If you are looking to get high-quality machining capabilities, consider the DMG DMC80U DuoBlock universal machining centre we have for sale. Contact us for further details. • Spindle type: Motor spindle without gearbox (Motorspindel ohne Getriebe) • Spindle speed ranges: • Operating mode 1: 0–10,000 rpm • Operating mode 2: 0–800 rpm • Operating mode 3: 0–5,000 rpm Cedpfx Aiey Egblopjrc • Spindle performance: • 40% duty cycle: 44 kW / 288 Nm • 100% duty cycle: 32 kW / 187 Nm • Spindle hours: 34,062 h • Machine on hours: 79,252 h • Spindle: New spindle installed end of 2025 • Workpiece dimensions (max): Diameter 800 mm, height 600 mm • Feed force (X/Y/Z): 10 kN • Rapid traverse: 60 m/min • Tool magazine: Chain type (60 or 120 slots, per technical documentation) • Cooling units: Machine cooling 3.3 kW; cabinet cooling 1.0 kW • Delivery: January 2027 Additional equipment • Dual pallet changer system • Internal coolant supply (ICS) with 980 l tank and band filter • Clamping hydraulics • Infrared measuring probe Technical Specification Taper Size SK 50

Condition: ready for operation (used), Year of construction: 2014, operating hours: 20,030 h, spindle speed (max.): 8,000 rpm, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, spindle motor power: 23,000 W, table load: 1,200 kg, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DECKEL MAHO DMF 260/11 was manufactured in 2014. It features an impressive X-axis travel of 2600 mm, Y-axis travel of 1100 mm, and Z-axis travel of 900 mm. The machine is equipped with a vertical motor spindle with a spindle speed range of 20 – 8000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMF 260/11 universal machining centre. Contact us for further details. • Control interface: Heidenhain ERGOline, 19" screen • Rapid traverse: 40 m/min; Acceleration: 4 m/s² • Main spindle: Vertical motor spindle power 23 / 5 / 13.5 kW (25 / 100% ED) • Tool magazine: 30 tools; chain magazine with double gripper; chip-to-chip 9 s • Tool magazine (optional): 60 tools SK40 / HSK-A63 • Table: 3200 x 1100 mm • Rotary table integrated: 1050 mm diameter • Clamping: Hydraulic • Measuring system: Direct measuring systems • Machine design: Full enclosure with coolant tank; 2 rotating viewing windows • Air supply: Sealing air for linear measuring systems • Through-spindle air: Selectable via M-function • Operating mode: Process monitoring in production • Language: German / English screen texts • Workpiece clamping release: Automatic mode enable Csdjy D Ilcspfx Aipsrc • Condition/Service history: • New spindle and new guideways, completely renewed by DMG (January 2026) • Geometry remeasured and adjusted by DMG (January 2026) • New spindle less than 100 hours Additional equipment • Chip conveyor: Scraper belt type • Touch probe: Heidenhain TS 649 infrared measuring probe • Tool measurement: Blum laser tool measurement system • Kinematic calibration: 3D quickSET • Machine protection: MPC Machine Protection Control • Internal coolant supply: 40 bar / 600 l with paper band filter • Coolant/mist extraction: Oil and emulsion mist extraction system; extraction capacity 2 x 1600 m³/h • Electronic handwheel • Coolant flushing gun (included) Technical Specification Taper Size SK 40

Condition: good (used), functionality: fully functional, Honing machine SZS 200X500D Cjdpfx Aisy D A Niopsrc

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 15,000 rpm, total height: 2,720 mm, total width: 2,630 mm, overall weight: 10,000 kg, table width: 630 mm, table length: 500 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, product length (max.): 4,500 mm, table load: 600 kg, number of slots in tool magazine: 60, swivel angle B-axis (max.): 180 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis DECKEL MAHO DMC 60U was manufactured in 2004. It features a spindle speed of 12,000 rpm and a tool magazine with 60 positions, enhancing its versatility for various machining tasks. The Y-axis was replaced in 2023, ensuring improved performance. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 60U universal machining centre we have for sale. Contact us for further details. Codpfx Aioy A Ip Esperc • Spindle taper: SK40 (replacement spindle, max ~2,500 operating hours) • Y-axis replaced in 2023 • Kinematics measured and within specification • Tool magazine: 60 stations • On-machine 3D probe: Hexagon • Year of manufacture: 2004 Additional equipment • Tooling, chuck, vises (details to follow; see attached PDF and Excel) • No robots/automation/chip conveyor/bar feeder information provided in the text above Technical Specification Taper Size SK 40 Through-spindle Coolant Yes