Eposetci

Condition: excellent (used), three-jaw chuck diameter: 250 mm, through hole: 75 mm, Diameter: 250mm 3 Chuck: x Spindle bore:75mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Gjdpfxozdidte Ahvouc

Condition: excellent (used), Year of construction: 2012, Vaccum Lifting Device COVAL VAC 12 FH Year of construction: 2012 Maxi loading capacity: 80 KG Suction cups diameter: Ø 150 mm Maxi spacing: 910 mm Mini spacing: 350 mm In very good condition Voltage: 380 V Dimensions (L x W x H): 1100 mm Depth: 900 mm Total height on frame: 1000 mm Guedpfx Ahozdidgsvec Total weight with support: 100 KG

Condition: ready for operation (used), Year of construction: 2017, overall weight: 3,800 kg, Edgebander manufactured in 2017. This HOMAG Optimat KDF 440 C features a workpiece thickness capacity of 8 - 60 mm and edge material compatibility of 0.4 - 8 mm. It offers a variable feed speed of 8 - 18 m/min and includes several units for joint trimming, glue application, and corner rounding. If you are looking to get high-quality edge banding capabilities, consider the HOMAG Optimat KDF 440 C machine we have for sale. Contact us for further details. • Condition: Used • Workpiece thickness: 8–60 mm • Edge material: 0.4–8 mm (depending on unit configuration) • Feed speed: 8–18 m/min (variable) • Min. workpiece length: approx. 120 mm • Min. workpiece width: approx. 60 mm • Glue application: EVA hot-melt adhesive; PUR-compatible (optional) • Glue pot: Teflon-coated; quick-change capability • Total connected load: approx. 15–20 kW (depending on configuration) • Compressed air requirement: 6–7 bar • Control system: powerControl / powerTouch • CE marking: Yes • Unit configuration: • Joint trimming unit • Glue application unit • Pressure zone • End trimming unit • Top/bottom trimming unit • Corner rounding unit Godpfx Ahszdidasvouc • Scraper unit • Buffing unit

Condition: good (used), Year of construction: 1990, three-jaw chuck diameter: 455 mm, through hole: 115 mm, Metal cutting Tooling PRATT BURNED MACH-ID 3005 Make: PRATT BURNED Year: 1990 Diameter: 455mm 3 Chuck: x Godpfx Aezdic Ashvjuc Spindle bore:115mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, mileage: 489,000 km, emission class: euro3, Year of construction: 2003,

Condition: used, Column-Mounted Crane VERLINDE type XC2 Capacity 500 kg Column Ø 250 mm Column height 4400 mm Height under arm 3700 mm Trolley useful length 2700 mm Delivery with one fixing plate Ø 810 mm (see photo) Gedpfjzdicpex Ahvjuc Total weight approx 2 T

Condition: used, mileage: 675,000 km, emission class: euro3, Year of construction: 2007,

Condition: used, Edwards Truecut 10 x 3000mm Shear Capacity mild steel 10mm Capacity in Stainless Steel 8mm. Capacity in Aluminium 13mm. Powered backgauge Elgo readout Shadow line Wandering foot pedal 1 x squaring arm Gsdjzdicdepfx Ahvjuc 2 x support arms Rake adjustment Rear safety fencing

Condition: good (used), ECKOLD - LFR 1508 T MACH-ID 3772 Make: ECKOLD Type: LFR 1508 T Guedjzdib Djpfx Ahvsc Year: 90 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: not inspected (used), Eckold tool Gjdpszdhbisfx Ahvouc ECKOLD - LFA1505T MACH-ID 3773 Make: ECKOLD Type: LFA1505T Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, mileage: 310,000 km, emission class: euro6, Year of construction: 2015, Year of construction: 2015 Guedpozdgn Uefx Ahvoc

Condition: used, mileage: 380,000 km, emission class: euro6, Year of construction: 2017, Year of construction: 2017 Gsdpfjzdgn Isx Ahveuc

Condition: used, Adira GH0640 4000mm x 6mm Guillotine (2015) Maximum Mild Steel Capacity (450 N/mm²) 6.5 mm Maximum Stainless Steel Capacity (700 N/mm²) 4.0 mm Cutting Length 4,050 mm Frame Gap 260 mm Blade Clearance Adjustment 0.05 – 1.1 mm Number of Hold-Down Cylinders 19 Backgauge Range 1,000 mm Cutting Angle (Rake Angle) 1° 3' Machine Length 4,980 mm Machine Width 2,840 mm Transport Width 2,180 mm Gsdozdgnzepfx Ahveuc

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, pressing force: 100 t, stroke length: 215 mm, table length: 4,100 mm, Equipment: CE marking, High quality fully serviced Bystronic 4metre cnc pressbrake for sale Gsdpfezdgnnjx Ahvouc PR100 100 x 4100 Make: Bystronic Edwards Pearson Model: PR 100 Pressure Reference Year / new: 2005 Total axis: 4 – 2axis back gauge X R – complete with 2 additional fingers on the back gauge, 4 fingers in total. With built in hemming table for producing sheet metal flashings or safety edges on sheet metal Hydraulic crowning Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 100ton Cnc control: Cybelec Modeva 10S control Max stroke 215mm Rapid approach 180mm/s Bending cycle 10mm/s Rapid return 150mm/s

Condition: good (used), Year of construction: 2005, Eckold tool ECKOLD - LFR1508T MACH-ID 3774 Make: ECKOLD Type: LFR1508T Year: 2005 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Gusdpfx Ahozdgnhjvjc

Condition: used, Safan 120-4300 TS-1 CNC Pressbrake Year 2004 Pressing Force 120 Ton Bending Length 4,300 mm Distance between Uprights 3,600 – 3,700 mm Maximum Stroke 180 mm Open Height (Table to Ram) 510 mm Throat Depth 400 mm Table Width 160 mm Gedpfx Ahozdgnbjvouc Main Motor Power 7.5 kW Control System Safan TS-1 CNC Number of Controlled Axes Typically 4 Axis (Y1, Y2, X, R) Electrical Supply 400V / 3 Phase Machine Weight Approx. 11,700 – 12,300 kg Machine Dimensions (L × W × H) Approx. 4,500 × 1,650 × 2,900 mm

Condition: good (used), Year of construction: 2005, Eckold tool ECKOLD - LFA 1505T MACH-ID 3775 Make: ECKOLD Type: LFA 1505T Year: 2005 Guedpfjzdgm Rex Ahvjc Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2004, condition: excellent (used), Known K&S 8020 Specifications Specification Value Bonding type Automatic thermosonic ball bonder Wire material Gold wire (Au) Bond head Voice-coil direct-drive bond head Ultrasonic transducer 120 kHz unibody transducer with adaptive USG Vision system 20/20 vision system Camera Sony XC-75 CCD Bond pitch capability Sub-70 µm pitch kit available Bond area 2.0 × 2.3 in (≈ 50.8 × 58.4 mm) Optics Universal optics with increased depth of field Illumination LED Workholder 250-series heated manual workholder Power 208 V, 50/60 Hz Control Software-controlled automatic bonding programs Typical Process Capability The 8020 was developed to provide: Fine-pitch bonding Long, low wire loops Improved process control High throughput for leadframe and laminate packages Automated vision alignment and pattern recognition These capabilities were key selling points of the 8000 family. Applications Plastic IC packages SOIC, QFP, TSOP Memory devices ASICs Hybrid microelectronics Chip-on-board assemblies Physical Characteristics Unfortunately, a complete factory datasheet with dimensions, weight, XY-table resolution, bond-force range, and supported wire diameters is not readily available in public archives. Most of the available information comes from listings of used equipment and K&S annual reports. Gedozdgm Djpfx Ahvouc If you need details such as: Bond force range (grams) Wire diameter range (e.g., 0.7–2.0 mil) XY positioning resolution Air requirements Maintenance manual Error codes or calibration procedures

Condition: good (used), Year of construction: 1990, Eckold tool ECKOLD - SW4T Eckold beak shaped stretching tool for 2 - 4 mm Guodpozdgmkofx Ahvoc MACH-ID 3776 Make: ECKOLD Type: SW4T Year: 1990 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2010, Eckold tool ECKOLD - FWA 602 / 4X Eckold elastic forming tool FWA 2 mm MACH-ID 3783 Make: ECKOLD Type: FWA 602 / 4X Godpfx Ahezdgmdovjuc Year: 2010 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, EUROPA 4-roller conveyor with variable speed drive Specifications: • Condition – used, after technical inspection • Manufacturer – EUROPA • 4 drive rollers, dimensions 120 x 50 mm • Forward/reverse rotation • Speed adjustment on the variable speed drive belt, range 3-21 m/min • Motor powered by 380V (3-phase) current Gjdpfxezdgl Tj Ahvouc • Weight approx. 70 kg Additional information: • Good technical condition • The photos shown reflect the actual condition of the item for sale • Possibility to switch on and test the device on site • The price stated in the auction does not include VAT and transportation costs Financing and transport: • We arrange transport using the MDD fleet, courier companies, or external carriers • We offer financial support in the form of leasing or a leasing loan

Condition: used, The K&S 8030 was a wire bonder, likely a specialized or less common variant. Based on the architecture of the 8000-series bonders, the typical specifications were approximately: Parameter Typical 8000-Series Capability Bonding method Thermosonic wire bonding Wire types Gold (Au), Aluminum (Al) depending on configuration Bond type Ball bonding or wedge bonding (model-dependent) Positioning Vision-assisted X-Y motion control Bonding area Typically 50–100 mm class work envelope Applications IC packaging, hybrids, chip-on-board, microelectronics Guedpfx Aszdgl Hjhvec Automation Programmable automatic bonding sequences

Condition: good (used), functionality: fully functional, SCM Sandya 30 RT wide belt sander Working width: 1100mm Working height: 3-160mm Number of sanding heads: 2 Steel calibration roller Sanding head with a segmented platen divided into 20 sections Motor power: 1.15 kW 2.11 kW Optical oscillation Dust extraction system on the second sanding head Spare segmented platen Gsdpfjzdgltex Ahvjuc Belt dimensions: 2620x1115mm Feed speed adjustable by means of a variator Machine dimensions: 180x300x230cm (H) Machine weight: 2700kg

Condition: good (used), Year of construction: 2005, Eckold tool ECKOLD - SW4T MACH-ID 3787 Make: ECKOLD Guedpfx Ahszdglmovec Type: SW4T Year: 2005 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Spare parts, accessories, and expert support for your GUBISCH machines. Gedpfezdglgsx Ahvsuc