Galler Zerspanungstechnik GmbH & Co.KG

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000 Year of manufacture: 2012 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.10 – 0.33 mm Wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Includes AGIEJOGGER handbox for convenient setup Includes AGIESETUP 3D Includes automatic wire changer AWC (using 2 wire spools) VISION 5 control AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg Bedpfx Aozbbmteggswn The machine will be completely cleaned, overhauled, and thoroughly tested. Subsequently, a laser measurement of the axes will be performed at our facility. We would be happy to carry out an individual test on the CUT 3000 for you. Includes operator training at Techma on your overhauled machine. Optionally, we offer you: - Transport - Commissioning - Cooling unit - Clamping devices - Consumables

Condition: used, Year of construction: 2022, Mitsubishi MV2400R High-Precision Wire Electro-Discharge Machine. Serial No. 52DU2438 (2022), Mitsubishi D - Cubes Series Control, Max Workpiece Dimensions 1050 x 820 x 305mm, Max Workpiece Weight 1500kgs, Travel X/Y/Z/U/V = 600/400/150/150mm, +/-75mm, Machine Weight 3500kg. Please note: This lot has been professionally decommissioned Bodpfxozbat Se Aggjwn Location: This lot is located in Burton-on-Trent. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2022, Mitsubishi MV2400R High-Precision Wire Electro-Discharge Machine. Serial No. 52DU2438 (2022), Mitsubishi D - Cubes Series Control, Max Workpiece Dimensions 1050 x 820 x 305mm, Max Workpiece Weight 1500kgs, Travel X/Y/Z/U/V = 600/400/150/150mm, +/-75mm, Machine Weight 3500kg. Please note: This lot has been professionally decommissioned Bodpfxjzbamxo Aggown Location: This lot is located in Burton-on-Trent. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2002, Voltage: 400V / 50/60Hz / 3 phases Machining method: Immersion Maximum workpiece size: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table dimensions: 900x600 mm Distance from floor to table: 900 mm Total dielectric fluid volume: 1200 L Axes X, Y, Z, U and V Travel ranges X, Y, Z: 550 x 350 x 400 mm Travel ranges U, V: 550 x 350 mm Collision protection: Axes X, Y, U, V, Z Tapered cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (Option 0.1/0.2/0.3 mm) Wire guide type: Closed diamond guide, gap-free Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 kg (P5) Dielectric fluid Paper filter: 2 cartridges Bodpfx Aeza U Nloggjwn Dielectric fluid temperature: +/- 1°C Total volume of ion exchange resin: 20 L Maximum injection pressure: 20 bar Generator: Dual source Isopulse Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 microns Ra Measuring system: Glass scales Measuring resolution: 0.5 microns Servo motors: AC type All technical specifications are subject to change without notice; errors and omissions excepted. The machine was fully functional until it was dismantled. Warranty is excluded.

Condition: like new (used), Year of construction: 2020, operating hours: 60 h, functionality: fully functional, machine/vehicle number: MW2035019, workpiece weight (max.): 500 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,160 mm, total length: 2,200 mm, total width: 2,100 mm, workpiece height (max.): 215 mm, overall weight: 2,850 kg, input frequency: 50 Hz, input current: 25 A, The machine is in almost new condition. It has been completely inspected, and all functions have been tested. The machine is sold with a 12-month warranty, including installation, commissioning, and training. We will arrange transport to your location. Bsdpfx Agoy U N D Uegswn The machine has only been used for demonstration purposes. Special feature: approximately 60 operating hours.

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, wire diameter (max.): 0.3 mm, overall weight: 3,900 kg, number of axes: 5, wire diameter (min.): 0.15 mm, This 5-axis AGIE Classic 3s wire EDM machine was manufactured in 2002. It features an X-axis travel of 500 mm, Y-axis travel of 350 mm, and Z-axis travel of 426 mm. The machine is equipped with a submerged head and includes a chiller, resin filters, and a wire feed/recovery system. If you are looking to get high-quality wire EDM capabilities, consider the AGIE Classic 3s machine we have for sale. Contact us for further details. • U/V axes travel: ±70 mm • Number of controlled axes: 5 (X, Y, Z, U, V) • Taper cut: up to ±30° • Generator: MC 3S (Lista 030.844) • Axis driver (DA): DA MC 3S (Lista 030.834) • Electrical cabinet: Cabinet Classic 3S (Lista 027.254) • Power supply voltage: 3×400 V / 50 Hz Bodsy Ulp Tjpfx Aggjwn • Installed power: 9 kVA • Rated current: 14 A • Dielectric: Deionized water • Heads type: Submerged with wire guide nozzles • Wire drive motor: +GF+ / Maxon Motor (Swiss made) • Circuit diagram: 628.992 Additional equipment • MTA chiller (included in the sale) • Resin filters • Deionizers • Wire feed/recovery system

Condition: good (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 4,100 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, CNC Control without coolant device Bwsdpfx Aey S Tp Aoggen Technische Daten – technical details: Verfahrweg X / travel X 350 mm Verfahrweg Y / travel Y 250 mm Verfahrweg Z / travel Z 250 mm Verfahrweg U / travel U +-45 ° Verfahrweg V / travel V +-45 ° max. konischer Schnitt / max. cone cutting +-10 ° Max. Dimensionen des Werkstücks / max. dimensions of the workpiece 820x680x250 mm Tischabmessungen / table size 700x480 mm max. Werkstückgewicht / max. workpiece weight 4100 kg Gewicht ca. / weight ca. 2640 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2013, Wire erosion / EDM Travel distance X: 600 mm Travel distance Y :400 mm Travel distance Z: 350 mm Bwedpfjy S Tgzex Aggon max. workpiece size X: 800 mm max. workpiece size Y: 570 mm max. workpiece size Z: 340 mm max. workpiece weight: 1000 kg table size X: 1050 mm table size Y: 710 mm with AWF ( Automatic Wire Feeding ) U / V axis: 150 x 150 mm submerged CNC Control: SPW

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Wire EDM machine type Agiecut Classic 2s, year of manufacture 2004, for sale. The machine is in good condition and operates flawlessly. An inspection under power is gladly possible. A video is also available upon request. Technical machine data: Agiecut Classic 2S • Manufacturer: AGIE SA, CH-6616 Losone (Made in Switzerland) • Model / Type: AGIECUT CLASSIC 2S • Year of manufacture: 2004 (with CE marking) • Serial number (unit): 663 • Equipment list No.: C32.102 • Circuit diagram No.: 629.412 Electrical connection values & performance • Voltage: 3 x 400 V • Frequency: 50 Hz • Power: 9 kVA Bsdjy Snm Nspfx Aggswn • Rated current: 14 A • Short-circuit current: 10K Weight & components • Total weight: 2,580 kg • Subcomponents (serial numbers): o MC 2S CLASSIC (unit): Serial 663 / Equipment List 002.354 o DA CLASSIC 2S: Serial 659 / Equipment List 033.804 o CABINET CLASSIC 2S (control cabinet): Serial 665 / Equipment List 028.254 Loading can be arranged by us upon agreement. If you have any questions, please feel free to contact us at any time.

Condition: good (used), Year of construction: 2006, MACHINE Wire EDM Machine Manufacturer: Mitsubishi Machine Model: FA 20 Control: Year of Manufacture: 2006 TECHNICAL DATA Travel distances - X-axis: (mm) 500 - Y-axis: (mm) 350 - Z-axis: (mm) 300 Bedpfsy Snbmsx Aggewn Machine Table - Table size, fixed table L x W: (mm) 780 x 630 - Max. table load: (kg) 1,500 - Workpiece dimensions: (mm) 1,050 x 800 x 295

Condition: used, Year of construction: 2010, Agie Charmilles FI 640 CC Wire-Cut Electro-Discharge Machine. Serial No. 113 (2010) Bsdpfxsy Rz Iwo Aggewn Please Note: this lot has been professionally decommissioned and secured for transit Location: This lot is located in Birmingham, UK. A charge of £550 for decommissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2007, Wire EDM machine Sodick AQ537L, year 2007, with low operating hours. It is equipped with a total operating hours counter (powered-on hours), which shows approximately 4,500 hours. Of these, about 70% are actual wire EDM machining hours, equating to roughly 3,100–3,500 true working hours. Bsdpoy Rxtkjfx Aggown

Condition: used, Year of construction: 2007, Wire EDM machine Sodick AQ537L, year 2007, with low operating hours. It is equipped with a total operating hours counter (powered-on hours), which shows approximately 4,500 hours. Of these, about 70% are actual wire EDM machining hours, equating to roughly 3,100–3,500 true working hours. Bwodpfx Agsy Rxr Hegon

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total width: 1,050 mm, wire diameter (max.): 0.3 mm, overall weight: 3,500 kg, controller manufacturer: MITSUBISHI, controller model: D‑CUBES / M800 series, product length (max.): 3,030 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Mitsubishi MV2400R wire-cut EDM machine was manufactured in 2017. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 310 mm, accommodating workpieces up to 1050 × 820 × 305 mm and weighing up to 1500 kg. If you are looking to get high-quality wire-cutting capabilities, consider the Mitsubishi MV2400R machine we have for sale. Contact us for further details. • Axis travels: U ±75 mm, V ±75 mm • Max. workpiece dimensions (W × D × H): 1050 × 820 × 305 mm Bsdpey Rrcfjfx Aggswn • Max. workpiece weight: 1500 kg • Table dimensions (W × D): 840 × 640 mm • Max. taper angle: 15° at 260 mm workpiece height • Wide‑angle taper (option): up to 45° at 60 mm (with special guides) • Positioning accuracy: ≤ ±2 μm over full stroke (MV‑R series spec) • Dielectric tank capacity: 860 L • CNC control: Mitsubishi D‑CUBES / M800 series; Industry 4.0 ready (networking and monitoring interface) • Machine condition: Excellent condition; very low hours • Industry 4.0: Prepared for connectivity

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 410 mm, controller model: Fanuc Alpha 180is-WB, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified deadline, by 08.06.26! TECHNICAL DETAILS Workpiece weight: 1,000 kg Travel distance X-axis: 550 mm Travel distance Y-axis: 370 mm Travel distance U-axis: 410 mm Travel distance V-axis: 120 mm Travel distance Z-axis: 120 mm Maximum cutting angle: 30° Number of axes: 5 Rapid traverse X-axis: 900 mm/min Rapid traverse Y-axis: 900 mm/min Bsdpfjy Nmxxox Aggewn Rapid traverse U-axis: 450 mm/min Rapid traverse V-axis: 450 mm/min Rapid traverse Z-axis: 900 mm/min MACHINE DETAILS Control system: Fanuc Alpha 180is-WB Operating hours: approx. 32,000 h Machine weight: 3,100 kg EQUIPMENT Automatic wire threading Note: Sale does not include the monitor above the control unit.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 55DM2752, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 400 mm Travel range Z-axis: 310 mm Travel range U-axis: ±75 mm Travel range V-axis: ±75 mm Wire diameter: 0.1 - 0.3 mm Max. workpiece dimensions: 1,050 x 820 x 305 mm Max. workpiece weight: 1,500 kg Table dimensions: 840 x 560 mm Table design: U-shaped Taper angle: max. 15° Taper angle at workpiece height: max. 260 mm MACHINE DETAILS Dielectric tank Tank capacity: 860 l Filtered particle size: 3 µm Water purifier: 10 l Dry weight: 350 kg General power supply: 13.5 kVA Bwodpoy I Uvcefx Aggjn Air pressure: 0.5 - 0.7 MPa Air consumption: 75 l/min or more Dimensions & Weight Dimensions (W x H): 2,022 x 2,150 mm Weight: 3,500 kg

Condition: used, Year of construction: 2018, Technical details: x-travel: 650 mm y-travel: 450 mm z-travel: 420 mm control: MAKINO Hyper i U-axis: ± 75 mm V-axis: ± 75 mm max. size of workpiece LxWxH: 1000 x 800 x 400 mm workpiece weight: max. 1500 kg Table dimensions: 910 x 710 mm weight of the machine ca.: 5 t Dimensions (L/W/H): 3 x 3 x 2,3 mm Bedpfx Aey I Ak Ieggown Accerories Memory 10 GB Ethernet I/P Interface Wire EDM in good condition. *

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, overall weight: 2,650 kg, input frequency: 50 Hz, Possible accessories can be discussed on site. Bsdpsy Irdkofx Aggjwn

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1320, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,080 mm, total length: 1,650 mm, total width: 2,225 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 400 mm, workpiece length (max.): 600 mm, table width: 400 mm, table length: 600 mm, feed length X-axis: 350 mm, feed length Y-axis: 250 mm, feed length Z-axis: 220 mm, tank capacity: 600 l, Equipment: compressor, cooling unit, documentation/manual, fridge, For sale: SODICK CNC Wire EDM Bwedey Ib Ewepfx Aggen - Model: AQ325L LN 1W - Year: 2002 - Serial No.: 1320 The machine has been regularly maintained by BTS COMPANY d.o.o. and CELADA d.o.o.. It has been used for machining workpieces up to 5 kg and various toolmaking tasks. Due to its high precision, it can also be used as a measuring machine. It is connected to the electrical grid and ready for operation.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 0120, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, type of input current: three-phase, overall weight: 4,400 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 13 A, Equipment: documentation/manual, We offer this used AGIE AGIECUT EVOLUTION 3 wire EDM machine, year of manufacture 1998. Serial number: 0120 Machine list: C31001,8 Year of manufacture: 1998 Wiring diagram number: 627232,2 Weight: 4,400 kg Voltage: 3 x 400 V Frequency: 50 Hz Power: 9 kVA Rated current: 13.1 A Bjdpfx Ajy Hfa Aeggjwn If you have any questions or require further information, please feel free to contact us by message or phone.

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 310 mm, Wire EDM machine Fanuc a-1iB Type A04B Year of manufacture: 2003 Technical data: x = 550 mm y = 370 mm z = 310 mm Machining area approx. 550x400 mm Table load: 1,000 kg Rapid traverse x/y/z: 450-900 mm/min Bwsdpfxjy Hb T Sj Aggsn Machine weight: 3.0 t Space requirement (WxDxH) approx. 2.60x2.90x2.2 m electronic handwheel Additional photos available upon request.

Condition: reconditioned (used), Year of construction: 2006, operating hours: 3,422 h, functionality: fully functional, machine/vehicle number: 214, workpiece weight (max.): 400 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 430 mm, wire diameter (max.): 0.3 mm, No minimum price – guaranteed sale to the highest bidder! Bwodpjy Ed E Isfx Aggon The machine was overhauled in 2025! The corresponding invoice is included. TECHNICAL DETAILS Maximum workpiece weight: 400 kg Travel X-axis: 500 mm Travel Y-axis: 350 mm Travel Z-axis: 430 mm Maximum wire diameter: 0.3 mm Table load: 400 kg Maximum workpiece height: 420 mm Positioning accuracy: 0.001 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 17 A Voltage: 3 x 400 V Power: 12.1 kVA Rated current: 17.5 A Short-circuit current: 10 kA Total weight: 2,650 kg Operating hours: 17,800 h EDM hours: 3,422 h EQUIPMENT Wire alignment device

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, total height: 1,843 mm, total width: 1,970 mm, wire diameter (max.): 0.3 mm, overall weight: 4,200 kg, number of axes: 5, wire diameter (min.): 0.15 mm, This 5-axis Sodick AQ535L wire EDM machine was manufactured in 2007. It features an X-axis travel of 550 mm, Y-axis travel of 350 mm, and Z-axis travel of 300 mm. The work table size is 790 x 500 mm, with a maximum workpiece weight capacity of 800 kg. If you are looking to get high-quality wire EDM capabilities, consider the Sodick AQ535L machine we have for sale. Contact us for further details. • Axis travels: • U: 80 mm • V: 80 mm • Table / Tank: • Work table size (W x D): 790 x 500 mm • Work tank dimensions (W x D): 1100 x 720 mm • Distance from floor to table top: 1005 mm • Workpiece capacity: • Maximum workpiece height: 290 mm (standard) / 270 mm (submerged) • Maximum workpiece weight: 800 kg (standard) / 680 kg (submerged) • Wire system: Bwodpfx Ajy D Rvdoggsn • Taper angle: 20° / 80 mm • Wire tension: 300 g to 2300 g • Max wire feed speed: 250 mm/sec • Max wire spool weight: 6 kg • Dielectric tank: • External dimensions (W x D x H): 640 x 2400 x 1843 mm • Empty weight: 350 kg • Capacity: 730 L • Deionizer: 10 L • Filtration system: 2 replaceable paper filters

Condition: ready for operation (used), Year of construction: 2006, operating hours: 37,021 h, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, total height: 2,220 mm, total width: 2,400 mm, wire diameter (max.): 0.33 mm, overall weight: 4,400 kg, controller manufacturer: AGIE, controller model: Software version 07.08.01., product length (max.): 2,800 mm, number of axes: 3, wire diameter (min.): 0.07 mm, This AGIE Agiecut VERTEX 3 Erosion machine was manufactured in the year 2006 in Switzerland and has 37021 erosion hours. It is equipped with an Agievision 5 Software version 07.08.01 control unit. • Control: Agievision 5 (software version 07.08.01) • Condition: Excellent; regular maintenance; major service recently completed; fully operational; can be tested under power • EDM operating hours: approx. 37,021 h • Travels (U/V): ±70 / 70 mm • Distance for clamping: 1,100 mm • Max workpiece dimensions: 1050 × 650 × 250 mm • Max workpiece weight: submerged 400 kg / non-submerged 800 kg • Max cutting height: up to 250 mm • Taper capability: ±30° / 100 mm • Positioning • Max manual speed: 2 m/min • Max programmable speed: 3 m/min • Resolution: 0.0001 mm • Geometric tolerances: per manufacturer specifications • Wire system • Wire diameter range: 0.07–0.33 mm (standard 0.20 mm) • Wire spool capacity: up to 25 kg • Wire tension: 0–25 N • Wire speed: 60–300 mm/s • Wire feed: semi-automatic • Wire disposal: chopper system • Equipment & features • Automatic wire threading system • Threading nozzles: 2 mm (optional 1 mm / 0.6 mm) • Combined wire guide system and cylindrical wire guide Bjdpfx Asy D N I Eeggown • Electronic handwheel (manual control) • Remote control with LCD display • TFT control screen (1024 × 768) • Keyboard and mouse control Dimensions Machine Depth 2800 mm

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, wire diameter (max.): 0.3 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis ONA U 400 wire EDM machine was manufactured in 2000. It features a table travel of 600 x 400 mm and a Z-axis travel of 400 mm, accommodating a maximum workpiece size of 1200 x 880 x 400 mm with a weight capacity of 850 kg. If you are looking to get high-quality wire EDM capabilities, consider the ONA U 400 machine we have for sale. Contact us for further details. Bwodpfx Agsy Dgrzegjn • Auxiliary table travel (U/V): 80 x 80 mm • Maximum workpiece size (X/Y/Z): 1200 x 880 x 400 mm • Maximum workpiece weight: 850 kg • Taper cutting angle at 100 mm (Z): 18° • Maximum taper cutting angle: 30° • Wire characteristics (bare): Cu 63% / Zn 37% • Wire tensile strength: 900 N/mm² • Wire spool type: DIN 125 / DIN 160 • Guide type: Closed diamond • Position resolution (X/Y/U/V): 0.001 mm • Minimum programmable increment: 0.001 mm