Tauernholz Forstservice GmbH

Condition: used, Machine: CSF Product feeding pump Guodpfez Ataaox Adtjg

Condition: used, Borelli cap chute for MCA 28 mm. Item number: ID6133. Godpfoz Ar U Nsx Adtoug

Condition: like new (used), functionality: fully functional, 1 unused crushing jaw, presumably for a Pegson 800 x 500. Dimensions approximately 1100 x 800 x 100 mm. Toothed design. One-time special price. Available immediately. Gujdpfxsz Ar U Aj Adtsg Subject to prior sale.

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,050 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, controller manufacturer: FANUC, table load: 1,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 60, number of axes: 4, This 4-axis OKK HM630 was manufactured in 2011. It features an X-axis travel of 1050 mm, Y-axis travel of 900 mm, and Z-axis travel of 900 mm. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine capacity of 60 tools. If you are looking to get high-quality machining capabilities, consider the OKK HM630 horizontal machining centre we have for sale. Contact us for further details. Gedpfx Aoz Ar Uvedtoug Technical Specification Taper Size BT 50

Condition: used, Machine: Cooling unit Godpfxez Ar Upj Adtoug

Condition: used, Year of construction: 2004, Handle applicator for carton, tray and six pack Guedpfx Aez Ar Uiodtsg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 1,045 mm, spindle motor power: 18,500 W, spindle speed (max.): 6,000 rpm, spindle bore: 82 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 1,045 mm, total height: 2,900 mm, total length: 4,500 mm, total width: 2,400 mm, overall weight: 9,200 kg, Multi-tasking lathe MAZAK - INTEGREX 200-4 S MACH-ID 9810 Make: MAZAK Type: INTEGREX 200-4 S Control: MAZATROL MATRIX Year: 2010 The Mazak INTEGREX 200-IV S is a multi-tasking CNC turning and milling center with a second/sub-spindle. The “S” indicates the sub-spindle, allowing complete machining of both sides of a workpiece in a single setup. Typical specifications include a maximum machining diameter of approximately 660 mm, a machining length of around 995 mm, and X/Y/Z travels of approximately 580 / 160 / 1,045 mm. The machine features a B-axis milling head, a main spindle and sub-spindle up to approximately 5,000 rpm, and a milling spindle typically capable of 12,000 rpm. It normally uses Capto C6 tooling and is often equipped with a 40-position automatic tool changer. Machines manufactured around 2006–2010 are commonly equipped with the Mazatrol Matrix CNC control. The INTEGREX 200-IV S is designed for complete machining of complex components, combining turning, milling, drilling, tapping and 5-axis positioning in one machine. This significantly reduces the number of setups and eliminates the need to move components between separate turning and milling machines. Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1045mm B Axis: 225° Spindle bore: 82mm Speedrange: 5000Rpm Guodpfx Ajz Ar Ucsdtog Spindle power: 18.5kW Subspindle speeds:6000Rpm Subspindle bore: 82mm Subspindle power:18.5kW ATC / revolver: 80 Speed live tools:12.000Rpm Length: 4500mm Width: 2400mm Height: 2900mm Weight: 9200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1978, Liter per hour: 7000 Gsdpfxez Ar T So Adtoug

Condition: excellent (used), Year of construction: 2013, operating hours: 18,000 h, functionality: fully functional, machine/vehicle number: 05200, travel distance X-axis: 2,300 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 900 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 50 rpm, table width: 1,300 mm, table load: 10,000 kg, table length: 2,500 mm, mount diameter: 50 mm, total height: 5,000 mm, total width: 6,000 mm, total length: 7,000 mm, type of input current: AC, workpiece weight (max.): 10,000 kg, overall weight: 35,000 kg, distance table to spindle center: 1,200 mm, quill travel distance: 500 mm, quill diameter: 130 mm, year of last overhaul: 2013, input voltage: 400 V, spindle motor power: 35,000 W, Compact portal milling machine with pivoting spindle head in very good condition, CNC HDH 426. Gusdpfx Aoz Ar T Eodtsg

Condition: used, bottom outlet NW 50 pressure gauge with outlet Optional: various fittings Gusdpfx Asz Ar Txsdtsg

Condition: used, Year of construction: 2003, machine/vehicle number: RRB338000, Machine: Bertolaso Sigma 105 5er Schraubverschließer Sigma 105 Gedpfsz Ar Trjx Adtsug

Condition: used, Year of construction: 1992, In- and outlet on the right side set to 28 MCA 6 heads Capacity: about 10.000 bph amount of capping heads: 6 capacity / hour ca.: 10000 working direction: rotating turret Drive: Treibriemen / variabel Gjdez Ar Tljpfx Adtsug

Condition: used, Year of construction: 1994, Deckel FP4 MA Universal Milling Machine Universal Milling Machine Deckel Type/Model FP4 MA Condition Used Year of Manufacture 1994 Godpfx Asz Ar Tfodtsug Technical Data Travel in X / Y / Z axis 485 x 385 x 380 mm Quill stroke approx. 70 mm (manual) Table surface 460 x 800 mm Spindle speed 50 to 3,150 rpm Tool holder SK 40 Operating voltage 3-phase 380 V 50/60 Hz Feed rate 2 to 1,000 mm/min Continuously adjustable Rapid traverse 2 m/min Machine weight approx. 1,850 kg Feature - Deckel Dialog / Contour control Inquiry item: Transportation costs in a separate quote.

Condition: good (used), Year of construction: 2022, operating hours: 8,555 h, load capacity: 1,600 kg, lifting height: 11,000 mm, fuel type: electric, mast type: triplex, construction height: 4,300 mm, with camera Gsdpfx Asz Ar S Iodtoug

Condition: used, Year of construction: 1997, machine/vehicle number: 800.167, Capsule type: champagne cap applicator, champagne cap folding capacity / hour ca.: 8000 Godjz Ar Szepfx Adtoug working direction: rotating turret Working type: fullautomatic amount of capping heads: 8 electrical power supply kW: 5

Condition: used, with 5 capping heads amount of capping heads: 5 capacity / hour ca.: 10000 type of closures: 28 x 15 working direction: right-left (CCW) Guodpfx Adjz Ar Suotsg

Condition: used, The machine is equipped with a storage hopper for sparkling-wine corks. The corks are automatically oriented and conveyed through the feed channel to the corking unit. Godpfx Adjz Ar Snjteug

Condition: used, Year of construction: 1993, Machine: Cames Macchine Enologiche P.Y-15-93 Champagne cork orientator Gsdpfx Ajz Ar Shodtjug

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 102 299940 0889, total length: 3,000 mm, total width: 800 mm, total height: 1,500 mm, input voltage: 380 V, overall weight: 620 kg, type of input current: three-phase, Lisec butylextruder, technically refurbished at our warehouse. Gsdpfxez Ar Sbe Adtoug

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10 mm, input voltage: 400 V, overall weight: 130 kg, warranty duration: 6 months, temperature: 80 °C, Kärcher HDS 850-4M Hot Water Pressure Washer The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 180 bar and a flow rate of 900 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features unique, actual photos; you are buying the exact machine shown. TECHNICAL DATA: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 900 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 80 Connected load [kW]: 6.5 Detergent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 130 EQUIPMENT: NEW heavy-duty spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE Gsdpfx Asz Ar R Rodtoug KEY FEATURES: Open oil system – no operating time limits Built-in chemical tank allows for direct detergent dosing via the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service Water softener tank (for RM110) prevents corrosion and scale buildup inside the heating coil and other lines.

Condition: excellent (used), Year of construction: 2007, operating hours: 5,500 h, functionality: fully functional, turning length: 1,545 mm, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, total height: 2,600 mm, total length: 5,200 mm, total width: 2,550 mm, overall weight: 14,000 kg, Equipment: documentation/manual, Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis 0,001 Degrees 5500 Cutting hours ! The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Gujdpfxjz Ar R Do Adtog Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Weight: 14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Machine: Mecamarc Optimeca rec 2962 C5 12 Mecamarc Optimeca Gedjz Ar Rwopfx Adtjug Technical data: working direction: left-right, linear capacity bph max.: 3000 labels: self adhesive labels number of labelling stations: 2 speed adjusment: frequence converter

Condition: used, minimum range for wine: 15,000 litres/hour Gsdpfx Adjz Ar Rqotjug

Condition: new, Year of construction: 2018, functionality: fully functional, turning length: 3,060 mm, turning diameter: 494 mm, spindle speed (max.): 2,000 rpm, overall weight: 17,500 kg, controller model: Fanuc 0i-TD, An unused CNC turning machine is for sale! TECHNICAL DETAILS Maximum turning diameter: 800 mm Turning diameter: 494 mm Maximum turning length: 3,060 mm Spindle speed: max. 2,000 rpm Bar capacity: 115 mm Travel X-axis: 300 + 20 mm Travel Z-axis: 3,100 mm Chuck: 15″ Spindle nose: A2-11 Tool stations: 12 Guedpfxsz Ar Rko Adtjg Boring bar diameter: 50 mm Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 20 m/min Tailstock diameter: 110 mm Tailstock taper: MK 5 Incline: 45° MACHINE DETAILS Control model: FANUC 0i-T C-axis: Duplomatic BMT75 Spindle motor power: 30 kW Motor power X-axis: 4 kW Motor power Z-axis: 7 kW Electrical connection: 55 kVA Dimensions & Weight Dimensions (L x W x H): 6,500 x 2,120 x 2,310 mm Machine weight: approx. 17,500 kg

Condition: excellent (used), 4-step bridge ladder. Gusdpfxez Ar Rdo Adtjg