BÜMA & VEMA Engineering und Maschinen GmbH

Year of construction: 2023, condition: like new (used), functionality: fully functional, machine/vehicle number: 018-2310-0001, Sono TEK ultrasonic spray coating system with conveyor belt or workpiece carriage - 6-head spray system Rodpfsyl Rr Hsx Afcjp - Was set up for anti-fingerprint / hydrophobic spray coating for display glass, but has seen little use as product launch was postponed - Conveyor approx. 2 m - Flexible gantry design, allowing spray width to be easily and precisely adjusted - Siemens Simatic touch panel - Commissioning / installation support can be provided - Documentation available System is dismantled and ready for transport.

Year of construction: 1999, condition: good (used), functionality: limited functionality, !!! Important!!! The systems have now been dismantled. The system components are available for inspection. Offered here are two functional SLC (Surface-like Chrome) vacuum coating systems/evaporation systems from PVT GmbH. The third, non-functional system is no longer for sale. The system documentation is available in paper form and will be provided upon purchase. Rjdoyhf Inepfx Afcjp To operate the systems, a compressed air supply, power supply, and water cooling are required, which must be provided by the buyer. All other PVT processes are, of course, also possible. The system was primarily used to treat wheel rims. Other workpieces made of aluminum, steel, or plastic are also possible, such as bathroom/kitchen fixtures, motorcycle and car components, door and window handles, etc. What is the advantage of the SLC process compared to chrome plating: - SLC coating is a high-gloss coating that is visually comparable to a galvanic chrome coating. The SLC coating is a high-gloss coating that is visually comparable to a galvanic chrome coating. - Significantly less susceptible to scratches and chipping - The process is more environmentally friendly and offers outstanding corrosion resistance - Costs are significantly lower Technical data: Chamber dimensions: approx. 1600 mm diameter and approx. 900 mm height Type: PVT 1600 SLC Manufacturer: PVT GmbH Year of manufacture: 1998/1999 Documentation: Available Control system: Allen Bradley PLC (automatic coating process including hardware)

Year of construction: 2000, condition: excellent (used), For sale: Professional closed powder feeder Sulzer Metco / Oerlikon Metco – model 9MPE-DJ (Closed Loop Powder Feed Unit). The device is designed for precise and stable dosing of powders in thermal spray processes (HVOF, APS, plasma, etc.). Nameplate data: • Model / Type: 9MPE-DJ • Year of manufacture: 2000 • Power supply: 115 / 215 / 230 V • Frequency: 50 / 60 Hz • Power: 0.92 kW • Current: 4 A • Phase: single-phase Features and equipment: • Closed-loop powder feed control – excellent repeatability of dosing • Operator panel with display and membrane keypad • Precision carrier gas regulators (rotameters, pressure gauge) • Powder hopper/tank located at the bottom of the cabinet • Mobile housing on casters • Complete set as shown in the photos Technical condition: • Device is complete and well maintained • Normal signs of use consistent with age • Visible Oerlikon Metco service stickers (serviced in the past) • Was recently in use in an industrial installation Rodeyg U Rvspfx Afcsp Applications: • Thermal spray lines (HVOF, plasma, arc, flame) • R&D laboratories and industrial production • Precision dosing of metallic and ceramic powders

Condition: new, Year of construction: 2016, functionality: fully functional, total height: 830 mm, total width: 800 mm, total length: 1,820 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Drive pinion: 10 teeth Chain sprocket: 10 teeth Carrier width: 30 mm Chain link length: 130 mm Rsdpfx Afjyf Aypocep MACHINE DETAILS Dimensions (L x W x H): 1,820 x 800 x 830 mm EQUIPMENT 2 pcs drive unit 1,600 x 360 x 520 mm 5 pcs spare chains (4 pcs packed)

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, total length: 2,500 mm, suction capacity: 7,200 m³/h, intake manifold diameter: 500 mm, Placing a bid obligates you to collect the item within the specified period until 27/02/2026! Rjdpfx Afeyfnqtjcop MACHINE DETAILS Voltage: 230 V EQUIPMENT - Robust construction - Easy and hassle-free spindle head change - Pneumatic two-hand operation - 6-spindle drilling head - Useful special accessories for extended processing options TECHNICAL DETAILS Exhaust duct diameter: 500 mm Extraction capacity: 7,200 m³/h MACHINE DETAILS Noise level: approx. 78 dB(A) Motor power: 1.5 kW ex External dimensions (L x W x H): 2,500 x 2,000 x 750 mm Height with fan: 2,700 mm EQUIPMENT - Housing made from galvanized sheet steel - Soundproofing with perforated pre-panel - Folding carton filter with fiberglass filter at the second filter stage - Front panel with high-performance filters - Wall duct NW 500 L = 500 mm round sheet metal plate - Wall outlet 45° with grid - Push-fit connector for hose or pipe NW 500

Year of construction: 2025, operating hours: 5 h, condition: as good as new (ex-display), functionality: fully functional, The cleaning system utilizes the latest and most advanced technology for precise surface cleaning available on the market. The high energy efficiency and instant heat generation of the laser produce an explosive effect on the material’s surface, effectively vaporizing and removing contaminants and unwanted residues—contact-free, environmentally friendly, and efficient. Rodpfxoyffdkj Afcep Compared to traditional industrial cleaning methods, laser cleaning offers numerous advantages: it is eco-friendly, highly efficient, space-saving, flexible, and easy to operate—making it increasingly preferred by companies.

Condition: good (used), Year of construction: 1991, Total output: 22 kW Operating voltage: 380 V AC Operating current: 46 A Rsdoydlidopfx Afcjp Frequency: 50 Hz Pneumatic pressure: 4 bar Water pressure: min. 3.5 bar

Condition: new, functionality: fully functional, Year of construction: 2026, Equipment: CE marking, Compact Flat Painting Machine for Small Workpieces The compact flat painting machine is an ideal solution for the automated coating of small workpieces. Designed for primers, lacquers, and paints, it ensures precise, uniform, and high-quality surface finishes. 🔧 Key Features: ✔️ Optimized for small parts – efficient and consistent coating results ✔️ Suitable for primers, lacquers, and paints ✔️ Spray area: 1200 × 800 mm Rjdpfx Ajx S Hd Hofcjp   – customizable on request   – larger versions available ✔️ Easy integration into conveyor and production line systems ✔️ Control systems: Siemens or Beckhoff, according to customer requirements 🤖 Flexible & Efficient Automation This system is designed for small batch production and automated painting processes, offering high efficiency, flexibility, and user-friendly operation. Each machine can be individually configured to match specific production needs and technical requirements. 🚀 Your Benefits: • Consistent coating quality • Reduced manual labor • Improved process reliability • Custom-engineered solution for your production line 📞 Interested in a customized solution? Contact us to discuss your project. We are an engineering company specializing in custom and robotic industrial painting systems for manufacturing environments. With over 20 years of experience, we deliver tailor-made solutions where standard equipment is not sufficient. Our expertise: • Industrial and robotic painting systems • Complete painting lines (design, manufacturing, installation) • Custom-made / non-standard engineering solutions • Integration into existing production layouts • Spray booths and painting walls • Metal fabrication and welding works We focus on automation, efficiency, repeatability, and reliability, adapting each system to the client’s production process and technical requirements.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Dry splitting machine for leather, working width 1800 mm Rsdpfox S Ew Eex Afcop

Condition: good (used), Year of construction: 2011, ET 6600-2 Rotary Table Wet Blasting System Process Description: The principle of wet blasting technology has proven itself for several decades as an extremely effective and efficient cleaning system. The ET 6600 wet blasting system is a rotary table wet blasting system based on centrifugal wheels, specifically designed to remove contaminants such as oils, greases, emulsions, rust, scale, paint, or other organic contaminants from components. The system is equipped as standard with a process chamber, two centrifugal wheels, a spray nozzle/blow-off unit, and a rotary table. This rotary table rotates the components in front of the centrifugal wheels or the spray nozzle/blow-off unit, thus enabling the processing of all areas of the components to be cleaned in a multi-stage process (blasting + washing + rinsing + drying). Workpiece Description: Various workpieces contaminated with oils, greases, emulsions, rust, scale, or other impurities Workpiece Material: Primarily metallic workpieces, but mineral or plastic workpieces are also possible Workpiece Dimensions: Min. 100 x 100 x 100 mm | Max. 1400 x 600 x 800 mm (Length x Width x Height) Other dimensions available upon request! Max. Weight: 500 kg (Optionally expandable to 2000 kg.) Processing task: Cleaning, degreasing, derusting, descaling, paint stripping, passivation Normal processing time: Cleaning, degreasing, derusting, descaling, paint stripping, passivation Final condition: Cleaned surface without specified requirements for residual contamination and, if applicable, corrosion protection Redpfex Exkfex Afcsp Process media: Blasting media, cleaning agents, process water purifier, and, if applicable, defoamer or passivating agent Process water treatment: Scraper conveyor – filter module or centrifuge system Manufacturer: ET Teknik Type: ET 6600-2 Operating voltage: 3x400 VAC+N+PE Frequency: 50 Hz Power: 27 kW Fuse: 63 A Control voltage: 24 VDC Year of manufacture: 2011 Dimensions: (L x W x Dimensions (H): 2700 x 2200 x 3700 mm Weight: approx. 4000 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs available upon request!

Year of construction: 2020, condition: good (used), Pad printing machine, screen printing machine, rotary printing machine, pad printer Rjdpfx Afex Ei Twecjp -Manufacturer: Eickmeyer, screen printing machine, pad printing machine -Type: TIC 121 SC -Voltage: 230 V -Table size: 180 x 100 mm -Protrusion: 165 mm -Operation: with foot pedal -Number: 2x pad printing machines available -Price: per piece -Transport dimensions: 670/400/H530 mm -Weight: 50 kg/piece

Condition: excellent (used), Year of construction: 2019, Laser source: Manufacturer: SYNRAD, a Novanta Company Model: FSV40SFD Type: V40 Redpoxzuimjfx Afcsp Series: firestar Year of manufacture: 2018

Condition: excellent (used), Stations/Equipment: Unwinder Rewinder Extraction system incl. shredder (4x Lundberg Type WT200-200U - year 2018) Inert enclosure Busbar laminating unit Cutting units Laminating units / adhesive application units Heated rollers Redsxzufhjpfx Afcop Master computer Control cabinets Drive motors Gantry crane Corona treatment

Year of construction: 2007, condition: like new (used), functionality: fully functional, Tape Machine Manufacturer: Ruscher Model: RU-FE Year: 2007 Redpsxyyc Asfx Afcop Information Tape-applying machine with roller conveyors, total length 11 meters. Suitable for facade profiles and many other types of profiles that need to be coated with protective film tape. Dimensions Length: 11,000 mm Width: 800 mm Height: 1,400 mm Seller’s Comments Fully functional Used in a production line for aluminum profiles Can be separated for transport

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 14823, workpiece height (max.): 80 mm, working width: 1,400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum working width: 1,400 mm Machine length: 1,500 mm Rodpfxjxx Szuj Afcjp Panel thickness: 3 – 80 mm MACHINE DETAILS Machine length: 1,500 mm EQUIPMENT Variable feed speed Control panel Dosing unit (chromed steel dosing roller) Spreader unit (rubber-coated roller) Motorized conveyor belt Built-in control panel and operating elements

Condition: good (used), functionality: fully functional, 2 Waxing Machines for stone slabs Rjdpsxxlm Dsfx Afcop

Condition: excellent (used), Soest Roller Coating Machine for Oxidative Oil , Hardwax Oil , Laquer and Stain , with Polishing Line 2 pads and 2 Brushes Rsdpjxqh Ibefx Afcep

Condition: like new (used), Chamber filter press from Netzsch. 20 plates 40x40 cm. Condition: excellent. Rjdpoxn Azdofx Afcjp

Condition: good (used), Chamber filter press Netzsch. 32 plates 47x47 cm. Condition: excellent. Dimensions: 320x140x120 cm. Weight approx. 1.8 tons. Redpfx Afsxnx D Uscop

Condition: not inspected (used), functionality: unexamined, overall weight: 1,000 kg, table diameter: 600 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Lapping diameter: 600 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,100 x 1,100 x 1,300 mm Weight: 1,000 kg Rjdpfsxni R Sox Afcsp

Condition: used, We are selling a used robotic grinding and polishing system. The system is in good used condition. Rsdjxlufvjpfx Afcjp The system includes: - 1x YASKAWA MH20 industrial robot with NX100 controller - 2x belt grinding machines for grinding belts with a circumference of 3,500 mm - 2x polishing machines with oscillation and feed for polishing discs with a maximum diameter of 500 mm - 1x loading table for pallets with dimensions (LxW): 1,200 x 600 mm - 1x control cabinet If you have any questions, please do not hesitate to contact us!

Year of construction: 2017, operating hours: 29,187 h, condition: not inspected (used), functionality: unexamined, total length: 20,000 mm, machine/vehicle number: 46236, Submission of a bid obligates the buyer to collect the equipment by 26.09.2025. Dismantling will require at least one week! Up for auction is a comprehensively equipped dip coating system with extensive accessories! No minimum price - guaranteed sale to the highest bidder! The system is divided into 16 stations. The following components are included in the offer: - FISA CCB 40 UV - FISA RB 50 (2 units, serial no. 49052) - 5 tanks - Buffer and coating area - Heraeus UV light system - DYMAX Blue Wave 200 - EuroChiller air filter package - Pre-filters (2 units) - Absolute filter - Modular product carriers - Loading tables - Racks for Kanban consumable dispensers - Liquid filter package - Stainless steel frame Additional equipment: - Various spare parts (filters, replacement pump, hoses, gaskets) - Numerous connectors, inspection windows, maintenance openings, rinse pumps, circulation units Redpfx Afexbyc Sscsp MACHINE DETAILS Dimensions: - Total length: approx. 20 m Operating hours: 29,187 h Note: The machine has not been tested by the seller but was in use until recently. Further information about the system can be found in the attached documents.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: Typ: V01-unsym, type of input current: AC, Tigres - Dr. Gerstenberger GmbH plasma generator V01 with two nozzles, each with approx. 3 m connection cable Redow E Elcspfx Afcop The generator and nozzles were used in a special machine for surface activation prior to bonding. The generator was integrated into the PLC control system.

Year of construction: 2012, condition: used, Technical details: total power requirement: 413 kW Induction hardening machine Rotary table Eldec: Z (servo drive 750 mm Y (electromechanical) 300 mm X (electromechanical) 200 mm Maximum part diameter 600 mm Maximum workpiece weight 500 kg High frequency generator type HFG 200 Rjdjw Dufvopfx Afcop Medium frequency generator type MFG 30 *

Condition: new, We manufacture expansion joints from high-grade steel sheet, thickness 3 mm. Preferred sections of two metres. Minimum order quantity: 20 linear metres. Redjwt Ihcepfx Afcsp The profile is designed to ensure strong anchoring in concrete. At the same time, it can serve as a formwork between successive concrete pours. We produce to order and adapt to the floor thickness. Surfaces not in contact with concrete are coated with waterproof paint. OPTION FOR STAINLESS STEEL PRODUCTION We can also deliver a partially or fully hot-dip galvanized version. The price depends on the height of the ordered expansion joint, adapted to the floor thickness. At the bottom of the expansion joint, we can add a geotextile skirt to prevent concrete from getting behind the formwork. Prices are quoted net. A prepayment of 70% of the gross order value is required upon ordering. After payment, we issue a VAT invoice. Production time is progressive, for smaller quantities up to three weeks. Example net price for expansion joint of 40 cm height – PLN 295.00/linear m Example net price for expansion joint of 25 cm height – PLN 235.00/linear m Prices may change. We also manufacture pneumatic dispensers for dispersed concrete reinforcement, expansion joint cord inserters, expansion cut cleaning machines, several types of chamfering machines for expansion cuts, power trowels, and concrete discs.