ABLE Maschinenvertrieb GmbH
ABLE Maschinenvertrieb GmbH from Eschelbronn
An und Verkauf von Gebrauchter und Neuer Zerkleinerungstechnik, wie Shredder, Schneidmühlen, Zubehör und Peripherie. After sale-service !!! Reparaturen und Überholungen
Mr Thomas Ganzer
Industriestraße 44
74927 Eschelbronn
Germany
Baden-Württemberg
Current offers from similar dealers
Listing
Châteauneuf-les-Martigues
8,041 km
Caravan/camper
Fiat Weinsberg Carabus 600 K | 4 postiletto | Completamente attrezzato
Fiat Weinsberg Carabus 600 K | 4 postiletto | Completamente attrezzato
Call
Condition: used, functionality: fully functional, mileage: 75,780 km, number of beds: 2, number of seats: 4, fuel type: diesel, gearing type: mechanical, color: white, total length: 5,990 mm, total width: 2,050 mm, total height: 2,520 mm, axle configuration: 2 axles, emission class: euro6, fuel tank capacity: 90 l, overall weight: 3,500 kg, operation weight: 2,810 kg, steering wheel position: left, number of previous owners: 1, Year of construction: 2023, machine/vehicle number: ZFA25000002W65528, Equipment: ABS, air conditioning, airbag, all-season tires, bathroom, car registration, central locking, electronic stability program (ESP), fog lights, full service history, lift bed, middle seating arrangement, navigation system, onboard kitchen, power assisted steering, second-hand vehicle warranty, shower, soot filter, traction control, truck registration,
Listing
Juszczyn
8,483 km
Glue spreader
OSAMAS2R-1300
OSAMAS2R-1300
Call
Condition: like new (used), functionality: fully functional, Single-sided glue applicator OSAMA S2R-1300
Working width: 1300 mm
Min./max. clearance height: 0-90 mm
Applicator roller diameter: 185 mm
Feed speed: 18 m/min
Fpedpfx Agox Tha Somob
Motor: 0.37 kW
Upper roller: grooved
Lower roller: smooth
New rubber roller coverings
Listing
GRONINGEN
7,525 km
Panel van
FordE-Transit 350 L2H2 Trend 68 kWh / 100% Elektris...
FordE-Transit 350 L2H2 Trend 68 kWh / 100% Elektris...
Call
Condition: used, mileage: 11,546 km, power: 135 kW (183.55 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,300 mm, first registration: 06/2023, color: white, number of seats: 3, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, parking sensors, seat heater, sliding door, traction control, = Additional Options and Equipment =
- Air conditioning
- Rear parking sensors
- Front parking sensors
- Right-hand side sliding door
- Android Auto
- Apple CarPlay
- Automatic dipped headlights
- Heated exterior mirrors
- Front electric windows
- Electrically adjustable exterior mirrors
- Driver airbag
- Remote central locking
- Height-adjustable driver's seat
- Height-adjustable steering wheel
- Keyless start
- Collision mitigation braking system
- Collision warning system
- Leather steering wheel
- Multimedia capability
- Fog lights
- Rain sensor
- Reversing camera
- Headlight assistant
- Heated seats
- Voice control
- Lane keeping assist
- Immobiliser
- Tachograph
- WiFi hotspot
- Heated windscreen
- Partition wall
= Further Information =
General Information
Number of doors: 5
Model range: Feb. 2022 - 2026
Cab: single
Technical Information
Torque: 430 Nm
Transmission
Transmission: 1-speed, automatic
Dimensions
Length/Height: L2H2
Dimensions (L x W x H): 553 x 206 x 255 cm
Weights
Unladen weight: 2,494 kg
Payload: 1,006 kg
Gross vehicle weight: 3,500 kg
Battery
Battery present: Purchased
Fpjdsx Tha Eopfx Agmjb
Battery: 68 kWh
Battery charging: Type 2
Rapid charging: Combined Charging System
Interior
Interior: black
Maintenance, History and Condition
APK (roadworthiness test): valid until 06.2027
Number of keys: 2 (2 remote controls)
Product Safety
Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL
Listing
Thiene
8,297 km
Wheel loader
Call
Condition: ready for operation (used), functionality: fully functional, gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 17,300 kg, tire size: 23.5-25, tire condition: 40 %, drive condition: 70 %, axle configuration: 2 axles, first registration: 07/2001, shovel volume: 4.4 m³, digging bucket width: 2,950 mm, brakes: other, suspension: steel, Year of construction: 2001, operating hours: 15,200 h, machine/vehicle number: 4520389, Equipment: all wheel drive, cabin, LIEBHERR L 554 Wheel Loader
Year: 07/2001
Operating hours: 15,200
Chassis no.: 4520389
Tyres: 23.5-25
Engine: D924 TIEA2
Power: 145 kW
Operating weight: 17.3 t
Bucket with weighing system, width 2.95 m – width 1.10 m; height 1.35 m
Max bucket capacity: 4.4 m³
Steering type: KL – external turning radius: 6.36 m
Air conditioning
All vehicles for sale can be inspected and checked.
Fpodox Thaxspfx Agmjb
Our sales team is available Monday to Friday from 8:30 am to 6:00 pm and Saturdays from 8:00 am to 12:00 pm. Directions: by car, exit A31 THIENE; by train, Thiene FS station.
Dealer: Trucks Italiana srl
Listing
Sanayi
10,226 km
Truck Mounted Forklift
Mazaka Heavy IndustryMF25D TRUCK MOUNTED FORKLIFT
Mazaka Heavy IndustryMF25D TRUCK MOUNTED FORKLIFT
Call
Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 2,500 kg, lifting height: 3,100 mm, free lift: 100 mm, load center: 500 mm, fuel type: diesel, mast type: duplex, power: 35 kW (47.59 HP), motor manufacturer: Yanmar Stage III and V, gearing type: hydrostat, fork carriage width: 1,278 mm, fork length: 1,200 mm, fork width: 122 mm, fork thickness: 40 mm, turning radius (inner): 2,592 mm, front tire type: pneumatic tires (air-filled), front tire size: 10x16,5 IND 10, rear tire type: pneumatic tires (air-filled), rear tire size: 10x16,5 IND 10, total height: 2,307 mm, total length: 2,858 mm, total width: 2,406 mm, color: green, Equipment: CE marking, adjustable boom, all wheel drive, cabin, fork extension, front guard, full service history, head guard, lighting, pallet forks, retractable fork, sideshift, MF25D
LET’S GET TO KNOW IT BETTER
Truck-mounted forklifts are designed to travel with the delivery vehicle, providing on-the-go material handling without the need for external lifting equipment.
Fedex Tharepfx Agmjpb
Their compact andlightweight design ensures easy transportation, allowing operators to unload goodsanywhere, even in remote or hard-to-reach locations.
With all-terrain capabilities, they canoperate on uneven surfaces, construction sites, or tight urban spaces, making deliveriesmore flexible and efficien
Listing
Turkey
9,823 km
Crushing unit
SandvikUSED SANDVIK MOBILE CRUSHER FOR SALE
SandvikUSED SANDVIK MOBILE CRUSHER FOR SALE
Call
Condition: used, Year of construction: 2014, operating hours: 17,000 h, overall weight: 52,500 kg, With FABO Guarantee
Purchased & Overhauled by FABO: The machine was purchased by our company and has undergone all necessary inspections.
Comprehensive Maintenance: All service and maintenance procedures have been meticulously completed.
Replaced Wear Parts: All worn-out wear parts have been replaced to meet original quality standards.
Ready for Immediate Use: The machine is in stock and can be shipped to your construction site the same day it is purchased.
Technical Specifications:
Model: Sandvik QI441
Fsdpfx Agox Thaljmspb
Serial Number: 1884BG14205
Operating Hours: 17,000 hours
Capacity: 300 – 500 tons/hour
Crusher Dimensions: 1380 x 800 mm
Motor : CAT 328 kW
Weight: 52,500 kg
Year of Manufacture: 2014
Listing
Brzesko
8,511 km
Hako Scrubmaster B70 NEW BATTERIES
HakoScrubmaster B70 TB650 - 2023y - 122mth
HakoScrubmaster B70 TB650 - 2023y - 122mth
Call
Condition: reconditioned (used), Year of construction: 2023, operating hours: 122 h, functionality: fully functional, working width: 605 mm, area performance: 3,200 m²/h, overall weight: 391 kg, warranty duration: 12 months, water tank capacity: 72 l, HAKO SCRUBMASTER B70 TB650 SCRUBBER
NEW 12V 105Ah SIAP GEL BATTERIES (2x)
Manufactured in 2023 with 122 hours of operation
650mm cleaning head (TB650) equipped with two new medium-hard disc brushes for use on any surface.
New polyurethane squeegee rubbers, resistant to oil, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation.
A new protective rubber around the brush head prevents water from splashing outside the machine's outline.
The device is equipped with a new, durable drain hose and a new suction hose.
A new suction turbine ensures high water suction power from the squeegee.
Each device we offer is individually photographed; you buy exactly what you see.
TECHNICAL DATA:
Power supply voltage (V): 24
Brush working width (mm): 650
Suction nozzle working width (mm): 950
Theoretical capacity (m²): 3200
Working speed (km/h): 5
Tank capacity (l): 72/74
Weight (kg): ~ 391
Power (kW): 2.28
Fpodpfx Agox Thafemjb
INCLUDED:
NEW GEL BATTERIES 12V 105Ah SIAP (2x)
NEW 24V 600W suction turbine
NEW 330mm PPL 0.5 disc brushes (2x)
NEW suction hose
NEW drain hose
NEW head guard rubber
Squeegee blade with new oil-resistant rubbers
Built-in battery charger
5 liters of Tenzi Normal solution - FREE
KEY FEATURES:
The 72 liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills.
The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface.
The large working width (650mm) ensures high surface coverage.
The control panel is very clear and intuitive.
Listing
Herentals
7,542 km
Suitcase
Mercedes-BenzAtego 1218 **MANUAL GEARBOX-BELGIAN TRUCK**
Mercedes-BenzAtego 1218 **MANUAL GEARBOX-BELGIAN TRUCK**
Call
Condition: excellent (used), mileage: 823,025 km, power: 130 kW (176.75 HP), first registration: 07/2007, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, total length: 9,000 mm, total width: 2,600 mm, total height: 3,460 mm, loading space length: 6,950 mm, loading space width: 2,450 mm, loading space height: 2,300 mm, Year of construction: 2007, Equipment: AdBlue, tail-lift, BELGIAN REGISTRATION DOCUMENT
MANUAL GEARBOX
= Additional Information =
Technical Information
Engine displacement: 4,250 cc
Front axle: steered; Suspension: leaf spring
Fedpfex Tg Uzsx Agmepb
Rear axle: twin tyres; Suspension: air suspension
Weights
Unladen weight: 6,760 kg
Payload: 5,230 kg
Gross vehicle weight: 11,990 kg
Functional
Tail lift: rear flap
Condition
Technical condition: very good
Optical condition: very good
Further Information
Contact Thierry Leemans for more information.
Listing
Eysines
7,563 km
Caravan/camper
Fiat Weinsberg Carabus 600 K | 4 postiletto | Completamente attrezzato
Fiat Weinsberg Carabus 600 K | 4 postiletto | Completamente attrezzato
Call
Condition: used, functionality: fully functional, mileage: 76,471 km, number of beds: 2, number of seats: 4, fuel type: gasoline, gearing type: mechanical, color: white, total length: 5,990 mm, total width: 2,050 mm, total height: 2,520 mm, axle configuration: 2 axles, emission class: euro6, fuel tank capacity: 90 l, overall weight: 3,500 kg, operation weight: 2,810 kg, steering wheel position: left, number of previous owners: 1, Year of construction: 2023, machine/vehicle number: ZFA25000002W61431, Equipment: ABS, air conditioning, airbag, all-season tires, bathroom, bunk beds, car registration, central locking, electronic stability program (ESP), fog lights, full service history, middle seating arrangement, navigation system, onboard kitchen, power assisted steering, second-hand vehicle warranty, shower, soot filter, traction control, truck registration, We offer flexible consumer credit options for easy and stress-free purchasing! The Nomad camper was designed for travelers seeking freedom and comfort on the road. Whether you’re planning a weekend getaway or a long road trip, this camper is engineered to meet all your travel needs with reliability and practicality.
💰 Warranty and money-back guarantee
✔ 1-year Indie Campers warranty 🛡️
Fedpfex Tg Uusx Agmjpb
✔ Satisfaction guaranteed! Try it for 14 days, and if you’re not satisfied, we’ll refund your money!
✔ Inspected and road-ready!
What makes this camper special?
✅ Spacious and comfortable: With a length of 599 cm and a height of 252 cm, it offers plenty of space to relax.
✅ Fuel-efficient and powerful: 2.3 Mjet diesel engine, 120 HP, manual transmission, and Euro 6 emissions class.
✅ Ideal for 4 people: Features 4 seats and 2 beds, perfect for families or group trips.
✅ Fully equipped for the road: Includes gas heating, auxiliary heater, air conditioning, and separate shower.
✅ Safety and convenience: Equipped with ABS, ESP, rear parking sensors, and power steering for smooth driving.
✅ Try before you buy – Not sure if it’s the right fit? You can rent the camper for as many days as you wish to get familiar with it and make sure it’s perfect for your travels.
Hit the road with the Nomad!
The Nomad camper is in high demand! Don’t wait: book a viewing and make it yours today.
📩 Contact us now to view our full stock!
Current location – Bordeaux
Listing
Balaguer
7,846 km
Band saw
SabiPBS 320-450
SabiPBS 320-450
Call
Condition: used, Year of construction: 2003, overall weight: 1,100 kg, working height: 700 mm, Double column bandsaw
Brand: SABI
Model: PBS 320-450
Year: 2003
The Sabi PBS 320 bandsaw is a semi-automatic double column machine designed for metal cutting.
Below are its technical features:
Cutting capacity at 90°:
Round: up to 320 mm diameter.
Rectangular: up to 320 x 285 mm.
Round: up to 280 mm diameter.
Bandsaw blade dimensions:
Length: 4570 mm.
Width: 34 mm.
Thickness: 1.1 mm.
Fedpox Tg Unefx Agmepb
Cutting speed: adjustable between 15 and 105 m/min.
Main motor power: 4 kW.
Working height: 700 mm.
Jaw height: 175 mm.
Machine dimensions:
Length: 2180 mm.
Width: 900 mm.
Height: 1525 mm.
Weight: approximately 1100 kg.
These specifications make the Sabi PBS 320/450 a robust and versatile choice for cutting operations in workshops and industrial environments.
Listing
Berlin
7,944 km
Shrinking equipment
Sleever International75 SL 2V 80 & MSA 250
Sleever International75 SL 2V 80 & MSA 250
Call
Condition: used, Year of construction: 2005, functionality: fully functional, For sale is a complete shrink sleeve system consisting of an Etisleeve sleeve applicator and a multi-zone steam shrink tunnel Powersteam, both from the renowned manufacturer Sleever International.
The system was in productive use until recently and efficiently processes shrink sleeves with high precision onto cylindrical containers.
Machine Configuration:
Sleeve Applicator
Manufacturer: Sleever International
Model: Etisleeve
Type: 75 SL 2V 80
Year of manufacture: 2005
CE-compliant
Steam Shrink Tunnel
Manufacturer: Sleever International
Model: Powersteam
Type: MSA 250
Year of manufacture: 2005
Control & Operation
– Integrated HMI control panel
– Digital input of sleeve length
– Performance display (products/min)
– Cycle and process control
– Safety monitoring (housing supervision, reset function)
– Production and daily counters
Technical Features:
– Precise vertical sleeve application
– Automatic sleeve film unwind
– Centering station for precise positioning
– Multi-zone steam shrink tunnel with stainless steel interior
– Continuous stainless steel conveyor belt
– Auger feed with interchangeable augers
– Height- and format-adjustable guide rails
– Full safety glazing with interlock system
– Industrial-grade drives and robust mechanical components
Formats & Performance:
– Proven operation with 100 ml containers
– Documented sleeve lengths (e.g., 155 mm)
– Additional formats possible depending on configuration
– Output depending on product approx. 40–80 containers/minute
Condition:
– Used
– Complete and fully functional system
Scope of Delivery:
– Etisleeve sleeve applicator
– Powersteam steam shrink tunnel
– Integrated conveyor technology
– Feed screws and visible format parts
– Existing adjustment and format documentation
The system is currently still fully assembled and available for inspection under production conditions.
A live demonstration with product and sleeve film under power is possible by prior appointment.
Location:
– Berlin
– Inspection possible
Fpjdpfx Ajx Tg Ubjgmsb
Price:
– On request
Listing
Idstein
7,804 km
CNC lathe
GildemeisterNEF 520
GildemeisterNEF 520
Call
Condition: good (used), Year of construction: 2006, Control unit MANUAL PLUS 4110
Fodpfx Agox Tg T Romopb
Listing
Werlte
7,605 km
Open semitrailer with tarp
KroneProfi Liner SDP 27 eLB50-CS mit Ladebordwand
KroneProfi Liner SDP 27 eLB50-CS mit Ladebordwand
Call
Condition: used, empty load weight: 6,270 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,695 mm, suspension: air, tire size: 385/65 R 22.5, color: white, gearing type: mechanical, Equipment: ABS, Wooden floor, container doors, disc brakes, lift axle, tail lift, sliding tarpaulins, sliding roof, pallet box, EBS, Multilock outer frame, KRONE axles, 2 x lift axles (1st and 3rd axle), tail lift by Bär, underride guard, load capacity: 2,000 kg incl. power supply for tail lift operation via truck through NATO socket, load securing certificate Code XL/beverage transport (VDI 2700 Part 12), German registration, well-maintained condition, little used!
Fpsdox Tg T Dopfx Agmsb
Listing
Goudriaan
7,506 km
Low loader
Semie dieplader gegalvaniseerd
Semie dieplader gegalvaniseerd
Call
Condition: new, axle configuration: 2 axles, color: silver, AGM galvanized (semi) low loaders can be assembled to customer specifications in order to offer a suitable (semi) low loader for every customer. Standard dimensions 2.1 meters wide, 4 to 11 meters long. Load capacity up to 25 tons. Number of axles depends on the length and load capacity.
Various options:
Tear plate or hardwood loading floor
Sprung triangle adjustable in height, possibly with strut leg or support wheel
Width lighting all around
Fpsdpjx Tg Twsfx Agmjb
Protected lighting
Lashing eyes around the loading floor
Loose ramps, fixed ramps, possibly hydraulically and width-adjustable
Slanted piece at the back, sloping piece ''neck'' at the front of the low loader
Storage compartments under loading floor
Slewing ring with triangle or fixed drawbar
Truck tires or agricultural tires
Condition: New
Listing
China
11,525 km
Auto vial bottle filling packing machine
Shanghai catclaw trading companyMzvbf01
Shanghai catclaw trading companyMzvbf01
Call
Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: Mzvbf01, Equipment: CE marking, Automatic vial bottle filling machine.this machine type normally customized by the customer vial bottle type and requirement of the production .It widely used for the pharmaceuticals and industry.
Filling and Capping: The process involves automatic bottle loading, automatic capping, automatic filling, automatic capping, and bottle discharging, all completed without human contact.
It employs a peristaltic pump for filling and a servo control system; the equipment's transmission is fully servo-controlled.
The capping torque is adjustable.
Fjdpox Tg Tqjfx Agmspb
The equipment is equipped with a buffer tank and a weighing function (Mettler-Toledo electronic scale) to control the liquid level by weight. It also features a magnetic stirring function.
All parts in contact with materials are made of 316L stainless steel, conforming to GMP standards.
Listing
Ostfildern
7,958 km
Zeiss Duramax 555 with Calypso 4.8
ZeissDuramax 555
ZeissDuramax 555
Call
Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 139437, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, type of input current: AC, input voltage: 230 V, compressed air connection: 5 bar, year of last overhaul: 2025, ambient temperature (max.): 35 °C, ambient temperature (min.): 13 °C, temperature: 20 °C, pressure: 4 bar, Equipment: documentation/manual, type plate available, 3D CNC coordinate measuring machine of the compact class. It fits into any office due to its low installation height.
Fpodpfjx Tg Tkex Agmeb
Features:
- Base frame
- VAST XXT sensor
- Probe changer magazine
- 3 probe changing plates
- Calibration sphere with certificate
- Machine folder, device documentation, user manual, various probes (see pictures)
- HP XW 4600 workstation for Zeiss WIN XP and monitor + keyboard and mouse
Dimensions in mm (without base): Length: 1160; Width: 1080; Height: 1803
With base: Length: 1170; Width: 1090; Height: 2480
Weight of the CMM in kg: without base: 350; with base: 445
Max. permissible workpiece weight in kg: 100
• Measuring volume: 500 x 500 x 500 mm³
• Duramax year: 2008
• Control panel: BP26
• Software: ZEISS CALYPSO 4.8
• Sensor: VAST XXT (probe changer, single-point measurement & scanning)
• Accuracy (example according to ISO 10360-2): 2.4 + L/300 µm (at 18-22°C)
Runs without any issues and has been checked by us.
Listing
Baienfurt
8,042 km
Machining center
DMGDMC 1035V eco
DMGDMC 1035V eco
Call
Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 17 kVA, torque: 83 Nm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 620, total height: 2,665 mm, total length: 3,250 mm, total width: 2,779 mm, table width: 560 mm, table length: 1,200 mm, table load: 720 kg, overall weight: 4,100 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 9,000 rpm, number of spindles: 1, number of slots in tool magazine: 20, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: documentation/manual, rotational speed infinitely variable, Used DMC 1035 V eco for sale – High-performance vertical machining center
Upgrade your manufacturing processes with this robust and powerful DMC 1035 V eco from DMG MORI! This vertical machining center is ideal for a wide range of milling tasks and offers outstanding performance when machining a wide variety of materials.
Key Features:
High rigidity and stability: Ensures precise machining results and a long service life.
Large work area: Provides sufficient space for machining large workpieces.
High spindle speed: Enables fast and efficient machining processes.
Fpodpfx Agsx Tg S Tomeb
Robust construction: Guarantees a long service life and reliable performance.
CNC control: Equipped with a user-friendly CNC control for easy programming and operation.
Additional Information:
Year of Manufacture: 2010
Condition: Good, Used
Control: Heidenhain TNC 620
Travel Range: 1,035 x 560 x 510 mm
Speeds: 20 - 9,000 rpm
Ideal for:
General Machining
Tool and Mold Making
Single-Part and Small-Batch Production
Mechanical Engineering
Why this DMC 1035 V eco?
This machine has been regularly serviced and is in good used condition. It offers a cost-effective way to expand your manufacturing capacity and increase your productivity.
Listing
Nieuwerkerk aan den IJssel
7,484 km
Elumatec SBZ 151 5-axis machining center
elumatecSBZ 151
elumatecSBZ 151
Call
Year of construction: 2015, condition: good (used), functionality: fully functional, machine/vehicle number: Machinenummer 1510052425, elumatec SBZ 151 5-axis machining center with a length of 7.3 meters.
- 5-axis CNC profile machining center
- Designed for flexible and efficient processing of aluminium profiles and thin-walled steel profiles
- Rapid positioning of the machining unit
- 6-sided machining capability, including bottom-side machining with angle head
Fpjdpfx Agex Tg S Hemeb
- Traveling tool magazines ensure short tool change times
- Magazine with 13 standard tools and seven special tools
- Autonomous clamp adjustment with absolute measurement system
- Two separate machining zones for pendulum (alternate) operation
- 5-axis CNC control for optimal machining capabilities and complex cutting operations
- Network connection and USB interface
- Supplied with Windows operating system and 15” flat screen monitor
Machine options:
- 2 zero reference points
- 10 material clamps
- 21 kW spindle
- 2 angle heads for machining the underside of the profile
- 12 various tool holders
- Remote control for all axes
- Label printer
Listing
Opole
8,319 km
Paint finishing system
VentisPrep-Station 120
VentisPrep-Station 120
Call
Condition: new, Year of construction: 2026, functionality: fully functional, total length: 7,000 mm, total width: 4,000 mm, volume flow: 12,500 m³/h, type of input current: three-phase, overall weight: 1,800 kg, working width: 4,000 mm, warranty duration: 12 months, inner dimension height: 3,000 mm, inner dimension length: 7,000 mm, filter area: 25 m², power: 10 kW (13.60 HP), Equipment: documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis Prep-Station – Professional Preparation Workstation
Clean Airflow | Efficient Preparation | Workshop Integration
⚡ Professional prep station for sanding, masking and surface preparation
⚡ Designed for daily use in body shops and refinishing centers
⚡ Optimized airflow for dust extraction and clean working conditions
⚡ Modular design – easy integration with spray booths and workshops
⚡ EU-compliant solution for professional environments
🔑 Key Advantages
✔ Clean and controlled airflow in the preparation zone
✔ Effective dust and particle extraction
✔ Improved working conditions and surface quality before painting
✔ Reduced contamination transferred to the spray booth
✔ Compact, modular design
✔ Designed for intensive daily workshop use
🌬️ Airflow & Ventilation Concept
The Ventis Prep-Station is designed to provide stable, directional airflow in the working area, efficiently removing sanding dust and airborne particles.
Optimized airflow across the work zone
Efficient extraction of dust and preparation residues
Cleaner environment for operators and surrounding areas
The system supports:
improved surface quality before painting
reduced rework and contamination inside the spray booth
🧱 Construction & Design
Fpodpfjx Tg Syjx Agmob
Robust steel structure suitable for workshop environments
Modular configuration – single or multi-bay layouts possible
Designed for flexible installation and future expansion
🧼 Filtration System
Multi-stage filtration system for effective dust capture:
Primary filters for coarse particles
Fine filtration for airborne dust
Easy access for maintenance and filter replacement
Ensures clean exhaust air and compliance with workshop standards.
💡 Lighting
Integrated LED lighting
Bright, uniform, shadow-free illumination
Improved visibility during sanding and preparation work
🖥️ Control System
Simple and reliable control panel
Control of ventilation and lighting
Designed for everyday workshop operation
📐 Configuration & Options
Single or multi-bay prep stations
Integration with spray booths and mixing rooms
Custom dimensions and layout on request
Optional enclosure panels and airflow configurations
🚚 Delivery & Installation
✔ Professional installation and commissioning available
✔ Integration support with existing workshop layouts
✔ EU-compliant documentation
🛡️ Warranty & Support
✔ Manufacturer warranty 12 months
✔ EU-based technical support and service
Listing
Baienfurt
8,042 km
Traveling column machining center
MatecHV 2000
MatecHV 2000
Call
Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 2,800 mm, total length: 7,000 mm, total width: 4,000 mm, table width: 635 mm, overall weight: 11,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 36, tool length: 340 mm, tool diameter: 70 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: Heidenhain iTNC 530
Travel X [mm]: 2,000
Travel Y [mm]: 600
Fedpfxjx Tg Sts Agmopb
Travel Z [mm]: 800
Installation dimensions LxWxH (mm): approx. 7,500 x 4,500 x 3,100 mm
Weight (kg): approx. 11,000
Spindle:
Max. speed: 10,000 rpm
Max. drive power: 16 kW at 40% duty cycle
Max. torque: 80 Nm at 40% duty cycle
Tool holder: SK40
CNC Swivel Head:
Swivel range: +/- 105°
Selectable: either continuous or indexable with clamping
General:
Direct position measuring system on X/Z/Y axes
Tool magazine with 36 stations
Electrical connection: 400V/3Ph/50Hz
Connected load: approx. 55 kW
Compressed air connection: 6-8 bar
Equipment / Accessories:
Rotary table as shown
Electronic handwheel
Chip conveyor
Listing
Cieśle
8,225 km
Plasma cutting machine
StigalDynamic Speed
StigalDynamic Speed
Call
Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 339, type of input current: three-phase, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 25 mm, working width: 1,500 mm, working length: 3,000 mm, color: red, Equipment: documentation/manual, lighting, For sale: An excellent plasma cutting machine from the renowned manufacturer STIGAL, model DYNAMIC SPEED with a power of 5500W.
Manufactured in 2014, powered by 400V. Serial number 339.
CUTTING MACHINE IN CONTINUOUS OPERATION, REGULARLY SERVICED
Fully operational!
Technical parameters of the STIGAL DYNAMIC SPEED plasma cutter:
Fpodox Tg Smopfx Agmjb
Working area (L x W): 3000 x 1500 mm
Positioning accuracy: +/- 0.05 mm
Travelling speed: 22 m/min
Maximum power consumption: 5500 W
Inspection welcome
Listing
Germany
7,969 km
Citizen Miyano BNE-51MSY, year 2018, internal number 231432
Citizen MachineryBNE-51 MSY
Citizen MachineryBNE-51 MSY
Call
Condition: used, Year of construction: 2018, machine/vehicle number: IntNr231432, CNC short turning machine – Citizen Miyano BNE-51MSY
Year of manufacture: 2018
Condition: Very good, fully operational
Availability: At short notice
Brief description
For sale is a Citizen Miyano BNE-51MSY CNC short turning lathe in MSY configuration featuring main and counter spindles, as well as a Y-axis. This machine is ideal for precise and cost-effective complete machining of complex turned and milled parts in series production.
Equipment / Highlights
- Fixed headstock (short turning)
- Main spindle + counter spindle
- Y-axis
Fpedpfx Agjx Tg Sgjmjb
- 2 tool turrets, each with 12 stations
- Driven tools
- Simultaneous machining capability
- High rigidity and process reliability
Technical data
- Max. bar capacity: Ø 51 mm
- Max. turning diameter: approx. 165 mm
- Max. turning length: approx. 380 mm
- Main spindle speed: up to approx. 5,000 rpm
- Counter spindle speed: up to approx. 5,000 rpm
- Control: Mitsubishi MELDAS
- Machine weight: approx. 8,000 kg
The machine is fully functional, both electrically and mechanically.
Complete technical documentation available.
The machine can be inspected under power by prior appointment.
Subject to technical changes, errors, and prior sale!
Listing
Offenburg
7,896 km
Food conveyor belt
Call
Year of construction: 2020, condition: used, functionality: fully functional, Food conveyor belt, belt speed is adjustable (Ponti)
Fpodpex Tg Saefx Agmsb
Listing
Germany
7,969 km
DN Solutions _Doosan LEO 1600, year 2023_ Internal No. 231441
DOOSAN-PUMALEO 1600
DOOSAN-PUMALEO 1600
Call
Condition: used, Year of construction: 2023, machine/vehicle number: IntNr231441, CNC lathe – DN Solutions (Doosan) LEO 1600
Year of manufacture: 2023
Condition: As new / very good, ready for operation
Availability: Short notice / by arrangement
Brief Description
For sale is a CNC lathe DN Solutions (Doosan) LEO 1600, manufactured in 2023. The machine stands out for its high stability, user-friendly operation, and reliable machining performance. It is ideally suited for cost-effective single-part and series production in conventional turning applications.
Features / Highlights
- Horizontal CNC lathe
- Powerful main spindle
- Robust machine construction for high dimensional accuracy
- Tool turret with fast indexing
- Compact design, minimal space requirement
- User-friendly CNC control
- High reliability and low maintenance
Technical Data
- Max. turning diameter: approx. 300 mm
- Max. turning length: approx. 300 mm
- Spindle bore: approx. Ø 65 mm
- Main spindle speed: up to approx. 4,500 rpm
- Tool turret: 12 stations
- Control: FANUC CNC
- Machine weight: approx. 3,500 kg
The machine is fully functional both electrically and mechanically. Complete technical documentation available.
Fpsdpfx Aex Tg R Nogmob
The machine can be inspected under power by appointment.
Subject to changes and errors in the technical data and specifications, as well as prior sale!
Listing
Grenay
7,895 km
Caravan/camper
Fiat Weinsberg Carabus 600 K | 4 postiletto | Completamente attrezzato
Fiat Weinsberg Carabus 600 K | 4 postiletto | Completamente attrezzato
Call
Condition: used, functionality: fully functional, mileage: 77,675 km, number of beds: 2, number of seats: 4, fuel type: diesel, gearing type: mechanical, color: white, total length: 5,990 mm, total width: 2,050 mm, total height: 2,520 mm, axle configuration: 2 axles, emission class: euro6, fuel tank capacity: 90 l, overall weight: 3,500 kg, operation weight: 2,810 kg, steering wheel position: left, number of previous owners: 1, Year of construction: 2023, machine/vehicle number: ZFA25000002W63314, Equipment: ABS, air conditioning, airbag, all-season tires, bathroom, car registration, central locking, electronic stability program (ESP), fog lights, full service history, lift bed, middle seating arrangement, navigation system, onboard kitchen, power assisted steering, second-hand vehicle warranty, shower, soot filter, traction control, truck registration, We offer flexible consumer credit options for easy, stress-free purchases! The Nomad campervan is designed for travelers seeking freedom and comfort on the road. Whether you're planning a weekend getaway or a long road trip, this camper is engineered to meet all your travel needs with reliability and practicality.
💰 Warranty and Money-Back Guarantee
✔ 1-year Indie Campers warranty 🛡️
✔ Satisfaction guaranteed! Try it for 14 days, and if you’re not satisfied, we’ll refund your money!
✔ Up-to-date inspection and ready to hit the road!
What makes this camper special?
✅ Spacious and comfortable: with a length of 599 cm and a height of 252 cm, it offers plenty of room to relax.
✅ Fuel efficient and powerful: features a 2.3 Mjet diesel engine, 120 HP, manual transmission, and Euro 6 emission class.
✅ Ideal for 4 people: equipped with 4 seats and 2 beds—perfect for families or group trips.
✅ Fully equipped for the road: includes gas heating, auxiliary heater, air conditioning, and a separate shower.
✅ Safety and convenience: fitted with ABS, ESP, rear parking sensors, and power steering for smooth driving.
✅ Try before you buy – Not sure if it’s right for you? You can rent the camper for as many days as you like to get familiar with it and ensure it’s perfect for your travels.
Hit the road with Nomad!
Fpsdpfjx Tg R Asx Agmeb
The Nomad camper is in high demand! Don’t wait: book a viewing and make it yours today.
📩 Contact us now to see our full stock!
Current location – Lyon















































































































































































































































































































