Franz Wöhrl Werkzeug & Maschinenhandel

Condition: used, Year of construction: 1995, Technical details: bore capacity in steel (diameter): 32 mm Iedpex U Dkcsfx Ahuoht throat: 293 mm bore stroke: 120 mm bore capacity in St 60 - full boring: 40 mm bore capacity in cast iron: Ø 38 mm spindle taper MT: MK 3 spindle throat: 293 mm spindle speed:: 160 - 2250 / seples U/min feed: 0,10 - 0,20 / manuell+automatisch mm/U Distance spindle/table max.: 55 - 642 mm table clamping surface:: 300 x 300 mm drill table adjustment: ja mm column diameter: 115 mm distance spindle center to floor plate:: 1207 mm total power requirement: 1,9 kW weight of the machine ca.: 280 kg dimension machine xH: 0,7 x 1,0 x 1,9 m

Condition: ready for operation (used), Beautiful Alzmetall industrial column drilling machine, ready for use and immediately available. Column drilling machine manufacturer: Alzmetall, model AB3 / ESV. The machine runs smoothly and drills precisely, just like on the first day. It is equipped with a retrofitted emergency stop switch and thus complies with DGUV Regulation 3, which was valid until 10/25 and can be renewed upon request. Technical data: - Drilling capacity in steel: 32 mm - Spindle mount: MK3 - Throat depth: 290 mm - Quill stroke: 160 mm - Speed range: 30 - 1600 RPM Ihsdpfxjx Tfkzs Ahujt - Motor power: 380V, 4.4 A = 2.3 HP according to nameplate - Machine weight: approx. 500 kg Used machine, fully operational, in well-maintained condition. Additional accessories available. Details, video, or test run upon request. Inspection by appointment possible. Delivery no problem.

Condition: new, functionality: fully functional, Drilling capacity in steel St 60: 25 mm Drilling capacity in cast iron GG 20: 30 mm Boring capacity in St 60: 30 mm Thread cutting in ST 60: M 16 Thread cutting in GG 20: M 20 Short spindle: MK 3 Spindle stroke: 140 mm Throat: 293 mm Column diameter: 115 mm Machine table – usable surface: 514 x 360 mm T-slot quantity – width – spacing: 2 x 14 x 224 mm Distance spindle-table min./max.: 132 / 724 mm Feed: manual Spindle speeds – stepless: 100 – 1,800 rpm Total power requirement: 1.0/1.6 kW Machine weight approx.: 260 kg Standard equipment: - Mushroom pushbutton (latching) for emergency stop - Reversing switch for clockwise and counterclockwise rotation - Motor protection switch - Stepless speed adjustment - Digital speed display - Protection class IP 54 - Plug connector (pre-installed) - Spindle guard with electrical interlock - Paint finish: DD textured varnish signal white RAL 9003, Pantone 7545c, black Ijdpfx Aex Sqt Sjhujht Special equipment: Pos. 12 LED machine lamp with radially adjustable light beam, connection power 230 V, protection class IP65

Condition: used, functionality: fully functional, Piling drill in very good condition Isdpfxex Sqigo Ahusht

Condition: good (used), Column drilling machine GILLARDON GB 25 Isdpfxsx Hr D Is Ahueht - Drilling capacity / steel: 32 mm - Drilling capacity / cast iron: 35 mm - Speed range – stepless: 60 - 1800 rpm - Rotational direction / right - left - Morse taper MT 3 - Throat depth: 290 mm - Quill stroke: 175 mm - Table size: 450x360 mm - Table height adjustment via hand crank - Thread cutting device - Coolant system - Drill chuck - Analog speed display - Foot switch - Emergency stop - Documentation Dimensions: LxWxH 0.7x0.7x2 meters / Weight: 470 kg Subject to errors and typographical mistakes

Condition: excellent (used), Year of construction: 1989, Column drilling machine, make GILLARDON, type: GB 45 VE, year 1989, in good condition. Equipped with thread cutting device, coolant system, machine lamp, machine documentation. Spindle taper: MT 4 Spindle speeds: 40–1100 rpm, motor power: 2.2 kW Maximum drilling capacity in steel: 45 mm – 55 mm Maximum drilling stroke: 200 mm 3 feeds: 0.1–0.16–0.25 mm/rev Maximum thread cutting in steel: M42 / M60 Table size: 560 mm x 450 mm Iodex Hr Akjpfx Ahusht Required space: 1.3 m x 0.8 m x 2.1 m, weight approx. 740 kg.

Condition: used, Year of construction: 1988, bore capacity in steel (diameter) 32 mm throat 295 mm Ijdpfxex Haxyo Ahuoht bore stroke 120 mm 3 speeds 125 - 3000 U/min table-size 300 x 300 mm column diameter 115 mm total power requirement 0,75 kW weight 225 kg dimensions 900 x 600 x 1800 mm Equipment: - V-belt driven pillar drill - Adjustable drilling depth stop - height-adjustable work table with T-slots - drill chuck

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 32.0 mm Ihodpfxox Dngke Ahust 35.0 mm bore stroke 150 mm M 22 (St 60) throat 300 mm 0.1 - 0.2 mm/U MK 4 480 x 480 mm 80.0 - 1.170 U/min 0.90 / 1.35 kW 340 kg 800 x 1000 x 2000 mm Manufacturer's list price: 8.665.00 EURO Special price on request Equipment: - Column drilling machine - "V-belt drive" - infinitely variable speed adjustment - Manual automatic spindle feed - Thread cutting device * automatic feed reversal RS for thread cutting - pole-changing drive motor - depth scale and adjustable depth stop - Height-adjustable work table * Adjustment with hand crank - Right/left rotation of the drill spindle - Machined machine base incl. coolant device - Machine/work light - Folding drill spindle guard - Emergency stop button at the front - CE marking + instruction manual

Condition: new, Bernardo Gear-Driven Pillar Drilling Machine GB 32 S Vario Technical Specifications Ihedex Agiuopfx Ahujt • Drilling capacity max.: 32 mm • Tapping capacity max.: M22 • Drill chuck: 1 – 13 mm / B16 • Morse taper: MK 4 • Spindle speed / 2 ranges: 90 – 980 / 1000 – 3000 rpm • Feed range: 0.06 / 0.12 / 0.18 mm/rev • Throat depth: 300 mm • Max. spindle to table distance: 670 mm • Spindle to base plate distance: 1285 mm • Quill stroke: 160 mm • Column diameter: 125 mm • Table size / T-slot size: 460 x 460 mm / 14 mm • Base working area: 420 x 340 mm • Motor output (S1 100%): 1.5 kW / 400 V • Motor input (S6 40%): 2.2 kW / 400 V • Machine dimensions (W x D x H): 540 x 900 x 2120 mm • Weight: approx. 360 kg Features • Infinitely variable speed control, ideal for adjusting the desired cutting speed • Machined base (420 x 340 mm) with integrated coolant pump • Integrated digital display for speed and drilling depth • Heavy-duty cast iron table with rotatable and tiltable work surface • Supplied as standard with 3 automatic spindle feeds • Guaranteed concentricity ≤ 0.02 mm measured in the quill • User-friendly membrane keypad operation • Standard with automatic quill feed and tapping device • Robust, ground steel column designed for heavy-duty use Scope of Delivery • Gear-driven drill chuck 1 – 13 mm / B16 • Drill chuck arbor MK 4 / B16 • Reducing sleeves MK 4 / 3, MK 3 / 2 • Delta VFD frequency converter • Automatic tool ejector • Coolant system • Electromagnetic spindle feed • Tapping device • LED machine lamp • Digital speed display • Digital drilling depth display • Height-adjustable safety guard

Condition: used, Year of construction: 1995, bore capacity in steel (diameter) 40 mm throat 230 mm bore stroke 130 mm Ijdpfsxz Hg Rex Ahueht taper MK 4 MK table-size 400 x 315 mm turning speeds 105 - 1257 U/min total power requirement 2,55 KW weight of the machine ca. 0,35 t dimensions 0,8 x 0,6 x 1,95 m

Condition: used, Year of construction: 1993, bore capacity in steel (diameter) 25 mm Isdpfxsxz Hgwe Ahusht throat 270 mm bore stroke 130 mm taper MK 3 MK table-size 500 x 350 mm turning speeds 100 - 2750 U/min connected load frequency 400 V total power requirement 1,1 KW weight of the machine ca. 0,22 t dimensions 0,8 x 0,6 x 1,8 m

Condition: used, Year of construction: 2019, bore capacity in steel (diameter) 50 mm throat 360 mm bore stroke 240 mm taper MK 5 MK table-size 580 x 460 mm feeds 0,1 - 0,2 - 0,3 - 0,4 mm/U turning speeds 52 - 1400 U/min total power requirement 3,0 KW weight of the machine ca. 0,75 t dimensions 0,8 x 1,2 x 2,2 m Pillar drilling machine: Ihsdexz Hgkspfx Ahujt - Feed rate 0.1 to 0.4 mm/rev - Tapping attachment - Digital speed display - Coolant pump - Motorized table height adjustment - Rotating and swiveling table - Machine light

Condition: used, Year of construction: 2000, drilling capacity steel/cast iron 40, 50 mm throat 280 mm bore stroke 125 mm spindle taper MT MK 4 spindle turning speed range 20- 2000 U/min table travel 500 mm weight of the machine ca. 275 kg table-size 420 x 340 mm distance work spindle /surface of the table 500 mm voltage 400 V Ihedpfx Ajxyab Sehujt connected load 0,75 kW

Condition: used, Year of construction: 2005, drilling capacity steel/cast iron 30,40 mm throat 280 mm bore stroke 125 mm spindle taper MT MK 3 spindle turning speed range 125- 4000 U/min table travel 500 mm weight of the machine ca. 275 kg table-size 420 x 340 mm distance work spindle /surface of the table 500 mm voltage 400 V Isdpfx Ahjxyab Eousht connected load 0,9/1,45 kW Machine can work left and right turning..

Condition: good (used), Year of construction: 2018, Used column drilling machine by Huvema Type HU 32 NTI Gear-driven Iedsxwibcjpfx Ahueht Equipped with tapping function

Condition: ready for operation (used), Ixion BS 23 STG with thread cutting device Isdpfx Ajxvzw Tohujht

Condition: good (used), functionality: fully functional, spindle speed (max.): 1,650 rpm, spindle speed (min.): 45 rpm, total height: 1,850 mm, total width: 940 mm, This Bimak Mod. 35 MT/C is a well-maintained column drilling machine equipped with a cross table and features a Mitutoyo digital readout on two axes. The machine supports both clockwise and counterclockwise rotation, which can be easily switched using a foot pedal for efficient operation. The Laip quick-change system includes ten tool holders, consisting of two drill chucks and seven collet holders, providing flexibility for various drilling and tapping tasks. An additional collet holder is required for milling operations with this machine. This holder is not included but can still be ordered as new. Manufacturer: Bimak Model: Mod. 35 mt/c Condition: Used Mains voltage: 400V Drive: V-belt Spindle taper: MC4 Spindle stroke: 150 mm Automatic spindle feed: No Ihjdpfx Ahsxt Ivksust Speed ranges: 14 (45 - 1650 rpm) Digital readout: Mitutoyo Coolant pump: Yes Reversible (CW/CCW): Yes Cross table dimensions: 600 x 240 mm Machine dimensions: 940 x 1100 x 1850 mm (Width x Depth x Height) Motor: 0.8 / 1.5 kW See website for a video of the machine in operation.

Condition: used, Year of construction: 1999, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 125 mm spindle taper MT 3 Ihjdpfx Aoxtfzkehujt total power requirement 1,8 kW weight of the machine ca. 250 kg dimensions of the machine ca. 1500x1000x1900 mm Equipment: - Stepless drive - Drilling depth stop - Extra long drill spindle - automatic feed

Condition: used, Year of construction: 2024, bore capacity in steel (diameter) 32 mm throat 265 mm bore stroke 150 mm taper MK 3 MK table-size 390 x 390 mm turning speeds 100 - 3300 U/min total power requirement 1,5 KW weight of the machine ca. 0,35 t Isdpjxtfy Hofx Ahueht dimensions 0,8 x 0,6 x 1,95 m Unused display machine with: - Thread cutting attachment - Variable spindle speed - Coolant system

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, spindle speed (max.): 2,440 rpm, spindle speed (min.): 200 rpm, total height: 1,725 mm, drilling capacity: 25 mm, column diameter: 80 mm, total width: 410 mm, total length: 750 mm, table width: 308 mm, table length: 308 mm, quill stroke: 209 mm, type of input current: AC, input voltage: 400 V, Exhibition machine like new Year of manufacture 2019 - Heavy-duty construction of the entire machine - High running smoothness thanks to new spindle design - Industrial motor - Separate emergency stop button - Digital depth gauge - LED machine light integrated in the drill head - Precisely machined, stable drill table with diagonal T-slots and surrounding coolant channel - Drill table tiltable ±45° and rotatable 360° Isdpfsxrz Dfsx Ahusht - V-belt cover with safety switch - Precision spindle bore - Machine operation with 24 V DC safety electrics - Guaranteed concentricity accuracy ≤ 0.02 mm measured at the drill spindle - Thick-walled steel column for high load capacity and stability - Massive, large-scale base plate with T-slots

Condition: used, Year of construction: 1970, Webo Gradua 40 Column Drilling Machine Details: Drilling capacity in steel (diameter): 40 mm Throat: 360 mm Drilling stroke: 240 mm Tool holder: MT 4 Speeds: 56 - 1250 rpm Drill motor: 2.0 / 2.4 kW Feeds: 0.12 - 0.19 - 0.26 - 0.4 mm/rev Table size: Ø 625 mm Column diameter: 240 mm Drill head vertical adjustment: 400 mm Total power requirement: 2.5 kW Space requirement approx.: 1.1 x 0.8 x 2.3 m Machine weight approx.: 1100 kg Isdpfx Ahsxq S Irjujht Control: conventional The machine was in operation until dismantling. Pickup in 75053 Gondelsheim. Forklift available for loading. Shipping by freight carrier possible; please inquire with your postcode.

Condition: used, Year of construction: 1987, bore capacity in steel (diameter) 32 mm Ihodpfx Asxqrd Hehuot throat 280 mm bore stroke 110 mm spindle taper MT 3 table-size 340 x 400 mm turning speeds 210- 2600 U/min total power requirement 1,8 kW weight of the machine ca. 325 kg dimensions of the machine ca. 950 x 450 x 1750 mm

Condition: used, Brand: Ibarmia-1B-35 Description: Dividing head bell, 2 stations Ijdpjxqmvkjfx Ahuoht

Condition: like new (used), Gillardon column drilling machine type GB 30 V, speed 60-1800 rpm, automatic feed, very good condition Isdexpxbcjpfx Ahujht

Condition: good (used), functionality: fully functional, Data : Continuous drilling capacity in ST 60 30 mm 12 speed levels 60 - 2240 rpm Spindle motor 1.1 / 1.6 kW . Projection approx. 320 mm Ihjdpfx Aoxpqwcshust Spindle stroke 170 mm Column diameter approx. 120 mm .