Sambre Meca

Condition: used, Year of construction: 2000, Hardinge VMC 600 II CNC Vertical Machining Centre with Fanuc Series O-MD CNC Control, Table Size 750mm x 500mm, 20 Tool ATC, BT40 Spindle Taper, Manuals & BT40 Spindle Tools. S/No. NVAAOF0060 (2000) Location: This lot is located in Burton on Trent, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Hedpfx Apszdtkhs Hsnn

Condition: used, Year of construction: 2004, Doosan Mecatec S550LM Slant Bed CNC Lathe with Fanuc Series 21i – TB CNC Control, Swing Over Bed 710, Distance between both Centres 1230mm, Max Turning Diameter 480mm, Max Turning Length 1130mm, Spindle Speeds 30 – 2500rpm, 12 Tools VDI40 Turret, X Axis Travel 300mm, Z Axis Travel 1150mm, Live Driven Tools, C Axis, Machine Weight 8000kg. S/No. LNY – 1008 (2004). Country of Origin: Korea Location: This lot is located in Birmingham, UK. A charge of £550 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Hnedpezdthmofx Ap Hon

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, bar passage: 78 mm, controller model: Fanuc 32iTB iHMI, center width: 689 mm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Travel distance tailstock: 640 mm Travel distance X-axis: 310 mm Travel distance Z-axis: 640 mm Travel distance Y-axis: +70/-50 mm Travel distance B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Spindle speed max.: 3,500 rpm ASA 8" A2 Spindle bearing outer diameter: 200 mm Spindle bearing inner diameter: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool stations: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 43,712 h Total operating hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm Machine weight: 6,500 kg Hnodjzdrzxopfx Ap Hen EQUIPMENT Gantry loader

Condition: used, Year of construction: 2000, Gildemeister CNC universal lathe Type/Model: CTX 600 E Condition: Used Operating hours: 99,831 h Year of manufacture: 2000 Technical data Swinging diameter: 680 mm Distance between centers: 2000 mm Spindle speed: 2800 rpm Chuck: Ø 315 mm Tool turret: 12 stations; incl. 3 stations for driven tools Tool holder: VDI 50 Tailstock: NC-controlled Dimensions approx. 5560 x 240 x 213 mm Hsdpezdrrkofx Ap Honn Weight approx. 10,000 kg Equipment: - Power chuck, type SMW Autoblok 315 BH-FX, Ø 315 mm - Control system: Heidenhain CNC Pilot

Condition: used, Year of construction: 2007, Turning diameter 300 mm Turning length 600 mm Control FANUC, 18i-TB Turning diameter over bed slide 230 mm Travel x1 165 mm Travel z1 700 mm Travel x2 190 mm Travel z2 720 mm Travel -y axis +/- 50 mm Hodpfjzdrppex Ap Honn Main spindle bore 76 mm Main spindle speed 5.000 U/min Main spindle drive 22 kW Max. torque on the spindle 208 Nm Sub spindle bore 76 mm Sub spindle speed 5.000 U/min Sub spindle drive 22 kW Max. torque on the spindle 208 Nm Tool turret 2 x 12 Stat. Number of driven tool stations 2 x 12 Speed of driven tools 5.000 U/min Max. torque 47 Nm Work piece power 5,5 kW C-axis resolution 0,001 ° Rapid traverse x + z axis 20 / 40 m/min Rapid traverse y-axis 7,5 m/min Total power requirement 68,4 kVA Included Bar feeder, Tools and driven tools.

Condition: used, Year of construction: 2007, turning diameter 65 mm turning length 150 mm control Siemens 840D spindle passage 75 mm Hnedozdk Evopfx Ap Hjn turning length 150 mm c-axis 2x 0,001 ° gripping station 65 mm speeds 5000 U/min rapid traverse 30 m/min turret (x-stations) 3x12 Number of axles 10 St. number of toolholder-holes 36 chip conveyor ja / yes kW coolant filtering unit ja / yes kW total power requirement 22 kW weight of the machine ca. 9 t dimensions of the machine ca. 4,4 x 2 x 2,3 + Iemca m DMG Sprint 64 Linear CNC lathe, built in 2007, 10 axes, 2 spindles, 3 turrets with Iemca Master 880 loading magazine Accessories: a large number of tool holders

Condition: defective spare-parts repository (used), Year of construction: 1997, functionality: not functional, machine/vehicle number: 128124, Mazak Super Quick Turn 18MS Mark II CNC lathe including Samsys bar feeder magazine – for hobbyists / defective Technical specifications (for the search function) Manufacturer: Mazak / Yamazaki Machinery UK Ltd Model: Super Quick Turn 18MS Mark II (SQT 18MS) Year of manufacture: 1997 Control: Mazatrol T Plus Machine weight: approx. 5,800 kg Condition: Sold as defective / for spare parts (turret malfunction) Accessories: Bar feeder magazine Samsys Multisam 2000 (Type MUS 2000, year of manufacture 1999) Detailed description (copy text) For sale: a CNC lathe Mazak Super Quick Turn 18MS Mark II (year of manufacture 1997) as a package with a matching Samsys Multisam 2000 bar feeder magazine (year of manufacture 1999). The machine comes from a well-maintained company and was primarily used for prototype construction. Accordingly, it only ran in a single-shift operation, if at all, and has been used very little in recent times. No heavy continuous use in mass production! IMPORTANT NOTE REGARDING THE CONDITION (sold expressly AS DEFECTIVE): The machine is sold as defective or as a project for hobbyists / for spare parts. Currently, the tool turret does not index/lock. However, for a service technician, specialist or someone familiar with this type of machine, this error should be easily rectified. Otherwise, we are not aware of any other errors or defects. Up to this error, the machine ran reliably. Scope of delivery & details: CNC lathe: Mazak SQT 18MS Mark II (weight approx. 5,800 kg) Control: Mazatrol T Plus Equipment: Main and counter spindle, C-axis Bar feeder magazine: Samsys Multisam 2000 (Type MUS 2000, S/N 087, year of manufacture 08/1999) with its own control unit Condition: Not operational due to the turret malfunction. Sold as is at the location, as inspected, with exclusion of any warranty. Ideal for companies with their own maintenance department or for technicians who would like to restore a high-quality machine with top equipment (counter spindle & driven tools not included). An on-site inspection is possible by prior arrangement. Assistance can be provided with loading, upon request. The transport is to be organized by the buyer. Hnjdpfjzdi N Tex Ap Hjn If you have any questions or need more information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 1999, turning length: 600 mm, turning diameter over cross slide: 350 mm, rotational speed (max.): 3,500 rpm, Fanuc 21T 3 axes C-axis for rotating tools 12-position turret chip conveyor tool set Hsdpfxjzdiy Ej Ap Henn

Condition: excellent (used), Year of construction: 2017, operating hours: 9,982 h, functionality: fully functional, turning length: 1,250 mm, turning diameter over cross slide: 500 mm, turning diameter: 500 mm, spindle speed (max.): 12,000 rpm, spindle bore: 76 mm, rotational speed (max.): 5,000 rpm, bar diameter (max.): 76 mm, Equipment: documentation/manual, rotational speed infinitely variable, We are not a dealer. More detail photo's are coming soon. We have for sale, this exceptional machine, fully loaded and ex-demo in perfect condition. It is possible to buy machine turn-key: including all tools and clamping devices, postprocessor. Even training is possible. machine is under power and is still operating. You can visit machine under working condition. Any inspection is possible. DMG MORI CTX BETA 1250 TC Gen2 Siemens 840. Main spindle ISM76. Sub spindle . Tailstock machine. Milling head 12.000 rpm B-axis compactmaster2. 5-axis simultaneous machining!! Capto C6 – 80 tools chain magazine!! Robot/barfeeder/automation package : +automation interface +Signal light +electrical door +barfeeder inferface +parts catcher +coolant flush mainspindle +coolant flush subspindle Chip conveyer Machine cooler system external ()Tropical package) Oil mist extraction system Coolant spray gun Hydraulic differential clamping pressure 8/20/80 bar coolant supply with filter and cooling unit (biggest tank): +80bar high pressure +filterunit +coolant water chiller a/c +internal coolant +external coolant Measuring/monitoring: 3D Probe Heidenhain Tool probe Heidenhain DMG technology cycles: +Tool sorting cycle +Multitool +Alternating speed +Retraction cycle +5-Axis simultaneous machining +MPC (machine protection control) +Excentric Machining +oval turning +Probing Barfeeder (shortloader). Fusion 360 postprocessor possible Main spindle chuck: Schunk 315 Subspindle chuck: Hainbuch 65 Toolholders: Sandvik/Hoffmann Capto C6 tools Spindle liners different sizes (oem DMG) Original DMG lifting gear. All documentation complete. Max turning length: 1200mm Hnjdpfxszdck Sj Ap Hon Max. turning diam: 470mm Tool magazine: 80 tools Main spindle speed: 5000 rpm Subspindle speed: 5000 rpm Milling spindle speed: 12000 rpm (Best TC ever made, stronger than new CTX450TC). Please feel free to ask any question. Machine is for sale turnkey. Machine is for sale as base machine (without tooling etc).

Condition: like new (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, DN Solutions PUMA 4100LMA Manufactured: November 2023 Only 550 hours of actual cutting time FANUC i Plus / iHMI control unit 12-station servo turret 8 live tools (driven tools) C-axis Programmable hydraulic tailstock Maximum turning diameter: Ø550 mm Maximum turning length: 2,060 mm Swing over bed: Ø790 mm Bar capacity: Ø102 mm Maximum workpiece weight: 500 kg X-axis travel: 352 mm Z-axis travel: 2,155 mm X-axis rapid traverse: 16 m/min Z-axis rapid traverse: 20 m/min 12-inch (315 mm) hydraulic chuck Spindle nose: ASA A2-11 Maximum spindle speed: 3,000 rpm Main motor power (continuous): 22 kW Main motor power (30 min rating): 37 kW Maximum spindle torque: 832 Nm Live tool speed: 4,000 rpm C-axis indexing increment: 0.001° Chip conveyor Chip bucket Automatic centralized lubrication system Coolant system Tool life management Spindle load monitoring Manual Pulse Generator (MPG) Working lamp Machine dimensions: 5,774 × 2,275 × 2,272 mm Machine weight: 11,050 kg Hedpfx Aozdartep Hjnn

Condition: good (used), For sale is the lathe shown in the pictures, manufactured by the Japanese brand Mazak, model Quick Turn 8n, with Mazatrol T32-2 control. The machine is equipped with a bar feeder and a collet chuck. We can arrange for machine loading at the location. Hodpezc Ri Tefx Ap Henn Net price: 23,000 (plus 23% VAT) Turning diameter: 160 mm Maximum turning length: 285 mm Spindle bore: 40 mm Maximum spindle speed: 6000 rpm 8-position turret Tailstock included Tool measuring probe Weight: 2700 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, turning length: 500 mm, turning diameter over cross slide: 290 mm, spindle speed (max.): 5,500 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, chuck outer diameter: 225 mm, swing diameter over cross slide: 290 mm, spindle nose: FL 140h5, overall weight: 4,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, A complete DMG MORI CTX alpha 500 V6 model, fully equipped! This machine features a C-axis, powered tooling, Y-axis, sub-spindle, and more. We acquired this machine in working order from production, and it can be inspected in working condition by appointment. Hnedpfx Apjzc Nlae Hsn Additional options & accessories: - Band filter system including high-pressure pump - DMG CELOS software - 3-jaw chuck (SMW Autoblok KNCS-N-225-66) on the main spindle - 3-jaw chuck (SMW Autoblok KNCS-N-170-43) on the sub-spindle - Chip conveyor - Coolant gun - Various VDI-30 tool holders (6 powered, 4 static) - Original DMG mist extraction system - All original documentation Weight & dimensions: 4,300 kg 4066x2583x1829 mm (LxWxH)

Condition: excellent (used), Year of construction: 2018, 2018 Haas ST-25 CNC Slant Bed Lathe Samchully MH-212 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Swing Over Tailstock Ø584mm Maximum Cutting (Varies With Turret) Ø381mm. Maximum Cutting Length (Without Workholding) 826mm. Bar Capacity Ø102mm. Distance Between Centre 762mm. Axis Traverses 'X'=318mm, 'Z'=660mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,200rpm (29.8kW Motor). Spindle Nose A2-8. 12 Station Turret. S/No. 3112177 (2018). Hnsdpfxjzc Id Uo Ap Hen With Coolant System (Tank Capacity 208L), Tool Setting Arm, Tailstock, Jorgensen Chip Conveyor, Footswitch & Signal Tower.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, MAZAK INTEGREX 200-IV ST x 1500 mm CNC Turning-Milling Center / Multitasking Turning Machine with Counter Spindle, Milling Spindle, Lower Turret, and 5-Axis Simultaneous Operation Capability. For sale is a very well-equipped Mazak Integrex 200-IV ST x 1500 mm with Mazatrol Matrix control, counter spindle, milling spindle, lower turret, 80-tool Capto C6 tool magazine, high-pressure coolant system, and finished parts unloading system with Schunk gripper. Previous Owner: High-End Medical Technology Company from Baden-Württemberg. Technical Data Manufacturer: Mazak / Yamazaki Mazak Type: Integrex 200-IV ST x 1500 mm Machine Type: CNC Turning-Milling Center / Turn-Mill Center Control: Mazatrol Matrix Serial Number: 2XXXXX Year of Manufacture according to Equipment List: 2009 Max. Turning Diameter: 660 mm Max. Turning Length: 1,495 mm Travel Ranges: X1-Axis: 580 mm X2-Axis: 150 mm Y-Axis: 160 mm Z1-Axis: 1,545 mm Z2-Axis: 1,490 mm W-Axis: 1,550 mm Main Spindle: Spindle Power: 22 kW Max. Main Spindle Speed: 5,000 rpm BB08 Ø 210 mm Internal Draw Tube: Ø 65 mm Counter Spindle: Spindle Power: 18.5 kW Max. Counter Spindle Speed: 5,000 rpm Full C-Axis on the Counter Spindle Milling Spindle: Milling Spindle Power: 18.5 kW Max. Milling Spindle Speed: 12,000 rpm Tool Holder: Capto C6 Tool Magazine: 80-tool Lower Turret: 9-station Lower Turret 15-bar Pump for Lower Turret available / prepared Equipment / Options Mazatrol Matrix Control 5-Axis Simultaneous Machining on the Main Spindle Tool Center Point Control Tilted Working Plane EIA / ISO Programming EIA 3D Compensation High Smoothing Control Hnsdpjzc Hipofx Ap Hjn Rotation / Coordinate Rotation Geometric Function Scaling Function External Data I/O Sub-C-Axis Control Inverse Time Auto TLM Polar Coordinates Input Comparison Stop G54.1 Synchronized Thread Cutting on the Milling Spindle Flash Tool / Flash Tool Preparation Variable 600 Sets Cylinder Function EIA Helical Tap Cycle EIA Pattern Cycle 2nd Auxiliary Functions Ethernet Operating Function including Network Card Network / Ethernet Running Coolant / Chip Conveyor / Peripherals High-Pressure Coolant System, Manufacturer: Streamware Preparation for High-Pressure 70 bar Reinforced Pump for Cover Flushing 15-bar Pump for Lower Turret Flushing System 2.7 bar on Main Spindle Flushing System 2.7 bar on Counter Spindle Chip Conveyor available, Manufacturer: Mayfran (identifiable) Oil Mist Extraction / Air Filter System, Manufacturer: LTA (identifiable) Finished Parts Unloading System with Schunk Gripper Preparation for Bar Feeder Preparation for Multi-Tool Holder Signal Light Yellow Overload Monitoring Clamping Devices / Accessories 2 pcs 3-jaw Chuck, Manufacturer: Kitagawa 1 pcs Hainbuch AxisFix mini Existing Turning Tools available upon request Capto C6 Tool Magazine with 80 Positions Electrical Data according to Nameplate / Photo Voltage: 3 AC 400 V Frequency: 50 / 60 Hz Max. Current Consumption: 128 A Rated Short-Circuit Breaking Capacity: 30 kA Manufacturer: Yamazaki Mazak Corp. VDE Inspection available, Next Inspection Date according to Inspection Label: 10/2026

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, EMCO MAXXTURN 65 – Technical Data Hnedpfx Apozcz R Ue Hjn CNC control: Siemens SINUMERIK 840D sl Programming system: ShopTurn Bar capacity: 65 mm Spindle bore: 73 mm Main spindle: 29 kW, 250 Nm, 5,000 rpm Counter spindle: 5,000 rpm C-axis: Main and counter spindle Tool turret: 12-position servo turret Tool interface: VDI 30 Driven tools: 12 stations Speed of driven tools: up to 6,000 rpm Y-axis: ±50 mm Max. turning diameter: 500 mm Rapid traverse X/Z: 30 m/min

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, turning length: 1,600 mm, turning diameter: 1,030 mm, spindle speed (min.): 1,800 rpm, spindle bore: 117 mm, travel distance X-axis: 470 mm, travel distance Z-axis: 1,650 mm, rapid traverse X-axis: 16 m/min, rapid traverse Z-axis: 20 m/min, total height: 2,770 mm, total length: 6,700 mm, total width: 2,360 mm, overall weight: 16,000 kg, Equipment: documentation/manual, DOOSAN CNC lathe, PUMA 600M model. - Swing over bed: 1,030 mm - Maximum turning diameter: 900 mm - Machining length: 1,600 mm - Bar capacity: 117 mm - X-axis travel: -470 mm - Z-axis travel: -1650 mm - Spindle power: 45 Kw - Motorized turret: 12 positions, BMT 85 - Fanuc 21iTB control (Manual Guide i) - Chip conveyor - Includes accessories, steady rest, tool holder, documentation, etc. - Year: 2006 - In very good condition Hjdjzczt Nopfx Ap Hsnn

Condition: like new (used), Year of construction: 2013, functionality: fully functional, turning length: 630 mm, turning diameter: 560 mm, spindle speed (min.): 4,200 rpm, spindle bore: 51 mm, travel distance X-axis: 230 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,356 mm, total length: 2,803 mm, total width: 2,210 mm, Equipment: documentation/manual, CNC lathe, brand GOODWAY, model GLS2000LYS. - Swing over bed: 560 mm - Max. turning diameter: 430 mm - Machining length: 630 mm - Bar capacity: 51 mm - X-axis travel: 230 mm - Z-axis travel: 630 mm Hjdpfx Aezczrrsp Honn - B-axis travel: 500 mm - Y-axis travel: +35 -35 mm - Main spindle: 11 Kw - Sub-spindle: 5.5 Kw - Powered turret: 24 positions, BMT - Control: Fanuc 0iTD (GLink 350) - Chip conveyor - Tool presetter - Parts collector - Includes equipment, documentation, etc. - Year: 2013 - In very good condition

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, turning length: 500 mm, turning diameter: 600 mm, spindle speed (min.): 4,500 rpm, spindle bore: 65 mm, travel distance X-axis: 250 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,730 mm, total length: 3,120 mm, total width: 1,705 mm, overall weight: 5,000 kg, Equipment: documentation/manual, CNC Lathe DAEWOO PUMA 2000 SY. Swing diameter over bed: 600 mm. Maximum turning diameter: 330 mm. Maximum machining length: 510 mm. Bar capacity: 65 mm. X-axis travel: 250 mm. Z-axis travel: 580 mm. Y-axis travel: +50 - 50 mm. B-axis travel: 580 mm. Main spindle: 18.5 kW - A2-6" - 4,500 rpm. Subspindle: 7.5 kW - A2-5" - 6,000 rpm. Driven turret with 12 positions (BMT). FANUC 18iTB control (Manual Guide i). Chip conveyor. Tool presetter. Parts catcher with conveyor belt. In very good condition. Hnedpezczquofx Ap Hen

Condition: excellent (used), Year of construction: 2013, HT 665 MC plus TCMY - FANUC Multi-axis CNC turning machine for complete machining of turning/milling parts; Integrated spindle motors (ISM) on the main and counter spindle with thermocompensation system (liquid-cooled) Drive power: Main spindle - 29 kW Counter spindle - 22 kW Speed range: Main spindle 0 - 5000 rpm Counter spindle 0 - 7000 rpm Spindle connection (DIN 55026): Main spindle: KK 6 (max. bar diameter ø 65mm) Counter spindle: KK6 Y-axis: Travel range +/- 50mm The Y-axis is designed so that the resulting cutting forces are distributed across two axes. This results in extremely high rigidity for all machining operations. Preloaded roller guides in all linear axes; digital drive system, integrated spindle encoder; State-of-the-art control technology FANUC 18i TB with Manual Guide i dialog programming. Includes: ·Draw tube cylinder including draw rod ·Part ejector and flushing through the counter spindle ·2x 12-position tool turret VDI 30 radial with direction logic for up to 2x 12 driven tool stations! Swivel speed adjustable with feed switch. o Performance data: o Max. 6.7 kW at 2650 rpm o Torque constant 25 Nm o Speed range 0-5000 rpm o C-axis for main and counter spindle ·Part removal device for the finished parts ·Chip conveyor with a discharge height of 1200mm programmable (Type "hinged belt") ·Coolant system integrated into the chip conveyor 2 pcs. high-pressure pumps with 14 bar 2 pcs. flushing pumps with 3.7 bar ·Electrostatic oil mist separator ·Hydraulic unit ·Machine light Hedpfxjzczgvs Ap Hsnn ·Documentation Year of manufacture: 2013 Includes: two Hainbuch chucks, collet chuck for collets 185E plus reduction is also included.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, turning length: 660 mm, turning diameter: 660 mm, spindle speed (min.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 280 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 65 mm, total height: 2,260 mm, total length: 3,030 mm, total width: 1,940 mm, Equipment: documentation/manual, GOODWAY CNC lathe, model GS-2600YS. - Swing over bed: 630 mm - Maximum turning diameter: 460 mm - Machining length: 660 mm - Bar capacity: 65 mm - X-axis travel: -280 mm - Z-axis travel: -800 mm - B-axis travel: -600 mm - Y-axis travel: +50 -50 mm - Main spindle: 15/18.5 Kw - Sub-spindle: 5.5/7.5 Kw - Motorized turret: 24 positions, BMT - Control: Fanuc 18iTB - Chip conveyor - Tool presetter - Parts collector Hnedezczfropfx Ap Hsn - Includes equipment and documentation - Year: 2009 - In very good condition

Condition: used, Brand : CMZ Model : TBI 520 MC Cnc : FANUC 18i-TB with Manual guide Yom : 2005 Times operation: 1371h Distance between centres: 1.100 mm Swing over bed: 520 mm Ø Max. Turning: 420 mm X Travel X : 296 mm Z Travel : 1090 mm Rapid Feeds (X, Z Axis): 18 m/min Rapid Feeds (Z Axis): 24 m/min Max Speed of the Head: 3000 rpm Hedezczacjpfx Ap Honn Spindle Bar Diameter: 82 mm Chuck Bore Ø: 95 mm Spindle Max. Power : 22 kw Number turret positions; 12 (VDI-50) Number positions of Driven tools 12 Driven Tools Speed 4000 rpm Max Power Driven Tools 8,5 kw C Axis and Driven Tools INCLUDED Hydraulic Steady Rest installation: INCLUDED Tool Presetter INCLUDED 2 Axial Driven Tool Holders INCLUDED 2 Radial Driven Tool Holders INCLUDED Installed Power 50 KVA Equipped with chip conveyor

Condition: excellent (used), Year of construction: 2017, Maximum turning diameter 300mm, maximum turning length 510mm, spindle speed 6,000rpm, milling speed 6,000rpm, sub-spindle speed 6,000rpm, main spindle bar capacity 42mm, 2 X 12 station turrets, spindle power 11Kw, Hnsdpfx Apszcy S Rj Hjn Y axis + /- 32mm, swarf conveyor, coolant., Fanuc OI-TF. barfeed unit.

Condition: good (used), Year of construction: 2015, Maximum turning diameter 255mm, distance between collet chucks 639mm, swing over bed 270mm, spindle speed 4,000rpm, milling speed 6,000rpm, sub-spindle speed 5,000rpm, main spindle bar capacity 66mm, Hodezcy Ilepfx Ap Hsnn sub spindle bar capacity 52mm, 3 X 12 station turrets, spindle power 15Kw, Y axis + /- 40mm, swarf conveyor, coolant., Fanuc 31i.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (max.): 3,300 rpm, rapid traverse X-axis: 40 m/min, milling spindle speed (max.): 10,000 rpm, The following work was carried out on the machine: Repair/overhaul of the gearbox of the B-axis (2025) Complete maintenance (2025) Motor magazine renewed (2025) Replacement of the linear guides of the X and Y axes (2024) Renewal of the ball screws of the X and Y axes (2024) Repair of the milling spindle (2024) Including approximately 120 tools, SK 50 TECHNICAL DETAILS Turning length: 1,524 mm Turning diameter: 820 mm Travel range, X-axis: 870 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 1,598 mm Main spindle Spindle speed (max.): 3,300 rpm Drive power of main spindle: 30 kW / 22 kW Max. torque of main spindle: 588 Nm Spindle nose of main spindle: A2-11" Spindle bore: 104 mm Indexing: 0.0001 Counter spindle Spindle speed (max.): 3,300 rpm Drive power of counter spindle: 30 kW / 22 kW Max. torque of counter spindle: 588 Nm Spindle nose of counter spindle: A2-11" Indexing: 0.0001 Milling spindle Drive power of milling spindle: 37 kW Max. torque of milling spindle: 260 Nm Milling spindle speed range: 0-10,000 rpm Rapid traverse, X-axis: 40 m/min Rapid traverse, Y-axis: 40 m/min Rapid traverse, Z-axis: 40 m/min MACHINE DETAILS Control system: Mazatrol 640M PRO Tool holder: SK50 Number of tool positions: 120 Operating voltage: 400 V / 50 Hz Connected load: 104 kVA Required installation area (L x W): 7 x 3.5 m Operating hours: 60,683 h EQUIPMENT Hedpfx Ajzcwylsp Hsnn Approx. 120 tools, SK 50 Variable speed adjustment Tool magazine, 120 positions High-pressure coolant, 70 bar Renishaw probe (new in 2025) Laser measuring system for rotating tools Interface set Air/water cooling through the spindle Overload monitoring system Chip conveyor, Mayfran Consep 2000 Quick-change tool holder, SMW

Condition: ready for operation (used), Year of construction: 2019, operating hours: 3,818 h, travel distance X-axis: 155 mm, travel distance Y-axis: 25 mm, travel distance Z-axis: 170 mm, controller manufacturer: FANUC, controller model: 32i-TB, number of axes: 8, This 8s Muratec MW 40 was manufactured in 2019. It features a twin-spindle configuration with automatic loading and unloading capabilities. The machine includes 2 C-axes and 2 Y-axes, providing versatile machining options. With a total of 7 turning holders and 6 boring holders, it is designed for efficient part handling. If you are looking to get high-quality turning and milling capabilities, consider the Muratec MW 40 turn-mill centre we have for sale. Contact us for further details. • Configuration: Twin-Spindle CNC Turning Centre • C-Axes: 2 • Y-Axes: 2 • Gantry Loader: Double Gantry Loader • Spindle Configuration: Twin Spindle • Tool Holders: 7 Turning Holders • Tool Holders: 6 Boring Holders • Condition: Fully Functional • Turning Station • Voltage: 400 V • Frequency: 50 Hz • CE Marking: Yes • Loader Type: Gantry Loader • Automation: Automatic Loading and Unloading System • Part Handling: Automatic • Turning Capability: Yes • Drilling Capability: Yes • Milling Capability: Yes • Tapping Capability: Yes • Coolant Filtration: Basket Filter • Transformer: 16 kVA • Transformer Input Voltage: 400 V • Transformer Output Voltage: 200 V • Hydraulic Chuck Foot Switches: 2 • Tool Monitoring System: Muratec Cutting Monitor • Tool Management System: Tool Counter with Sister Tool Selection • Polar Coordinate Interpolation: G12.1 • Cylindrical Interpolation: G7.1 • Rigid Tapping: Yes • Coolant and Air Through Spindles: Yes • Twin Front Spindles: Yes • Books are included (instruction manual in German) Optional: Hodpfszcwiyjx Ap Hjnn • Parts Infeed Conveyor • Parts Outfeed Conveyor • Chip Conveyor Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes