Huber Holzbearbeitungsmaschinen GmbH & Co. KG

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available Nodoxzfwbepfx Adnedd - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: used, Year of construction: 2015, functionality: fully functional, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banding machines for gluing and processing straight edges with roll material (melamine, PVC, ABS, veneer) and strip material (solid wood, laminate, sliced veneer, etc.) • NC control with touch display • Automatic start of aggregate motors • Direct selection for second pass • Operating data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness 10-60 mm Workpiece thickness with MFU aggregate (depending on profile) 10-35/60 mm Edge height 14-64 mm Edge thickness – roll material 0.4-3 mm Edge thickness – strip material (*) 0.4-10 (12) mm Workpiece overhang 25 mm Minimum panel length 140 mm Minimum width (at 140 mm length) 85 mm Minimum width (at 250 mm length) 50 mm Feed speed 12 m/min Dust extraction* 8x connection Ø100 mm Compressed air connection 7 bar Glue pot capacity 2 (approx.) kg * Depending on selected aggregates. - GLUING UNIT VC-511 Applies the hot-melt adhesive to the workpiece, feeds the edge to the workpiece, automatically cuts it from the roll, and presses it onto the workpiece, guaranteeing perfect positioning. - END TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs with 0° to 15° angle. - 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made of synthetic material up to a thickness of max. 3 mm. JOINTING CUTTER UNIT RT02 Joins the workpiece before glue application. Equipped with two 1.8 kW high-frequency motors at 12,000 rpm. SCRAPER UNIT RB02 For post-processing thick PVC/ABS edges. FLAT SCRAPER RC02 Aggregate for removing excess glue in the edge-to-panel area. Equipped with tracing rollers and a flat knife with engagement control. BUFFING UNIT SZ02 For cleaning and buffing the workpiece edge using fabric polishing discs. The unit automatically adapts to the workpiece thickness. ANTI-ADHESIVE SPRAY UNIT ADZ02 Precision application of anti-adhesive using injectors activated by numerical control. KIT PRO-GLUE The PRO-GLUE kit includes the following components: • TEKNO-GLUE system for optimal gluing through: - controlled pressure of the glue roller - automatic disengagement in case of feed stop - automatic ON/OFF of the glue unit • REVERSE system to switch the glue roller for co- or counter-rotation Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue with machines equipped for EVA gluing. NC Axis for Fine Trimming Unit Kit for the automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system. Pair of multiprofile cutters for the fine trimming unit: 25-degree bevel, radius 2 mm + radius 1 mm plus straight profile for solid wood. Nedpfx Adexzb Iionsdd NC Axis for Profile Milling Unit Kit for automatic adjustment of the tracer to match the edge thickness. Adjustment takes place via the control system. Function for processing only on the corners. NC Axis for Scraper Unit Kit for automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system.

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Nedpfxsxy Tm Ij Adnodd

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: M/53056, total length: 9,800 mm, overall weight: 4,500 kg, compressed air connection: 6 bar, input voltage: 400 V, input frequency: 50 Hz, Single-sided edge banding machine in right-hand configuration - with jointing unit - gluing unit - double end cutting unit - flush trimming, chamfering, and radius milling unit - corner rounding unit - scraper and edge buffing unit with high-performance automation - pressure zone with one driven roller and six follow-up rollers - automatic edge thickness adjustment for all units Nodpfsxy Sizex Adnsdd - automated chamfer thickness adjustment of the top pressure to panel thickness - pneumatic engagement/disengagement of all processing units with monitoring - Machine in CE-compliant design with complete encapsulation of processing zones by high-quality noise protection hoods. Machine length: 9,800 mm Machine weight: 4,500 kg Gluing unit - for hot-melt adhesive granules - with quick heating tank, preheating time: 6 minutes - electronic temperature control - adhesive application roller (no adjustment required for different material heights) - operates in both co- and counter-rotation, automatically activated via program control Edge thickness: 0.2 - 20 mm Workpiece dimensions: Minimum width: 60 mm Minimum height: 8 mm Maximum height: 60 mm Minimum length: 160 mm for strip edges / 60 mm for continuous roll edges / 150 mm with double end cutting unit Workpiece transport - heavy-duty chain conveyor with precision sliding guides for chain support plates with flat and round guide rails to ensure positive workpiece transport - feed speed: 12 - 20 m/min, adjustable via electronic frequency inverter from the central control panel, values can be saved in work programs - motor power: 5.5 kW Panel thickness adjustment Motorized adjustment of double roller top pressure, preselection via the central control panel, values can be saved in work programs Edge thickness adjustment - automatic positioning of all edge thickness-related units including the pressure zone, preselection via the central control panel, values can be saved in work programs Machine control - central control panel - PLC and line control for contactless control of the processing units Central control panel - for flexible and easy operation of the edge banding machine, with a specifically developed user interface for clear and rapid access to all important machine and unit statuses - intuitive menu navigation via two-line text display, supported by clearly arranged symbols with two-color LED status indicators PLC - high-performance PLC to industrial standards for fast and efficient interaction with the machine and for controlling all functional groups and line control Line control - high-resolution line control of all processing units with +/- 1mm accuracy over the full machine length - complete access via the control panel for all program-controlled processing units - values can be saved in various work programs EFU - electronic frequency inverter Connections Electrical: 3 x 400 V, 50 Hz, rated current 42 A, protection: 50 ampere, supply: 5-core, 5 x 10 mm², control voltage: 24 V Extraction: 1 x 120 mm, 1 x 160 mm, 1 x 120 mm, extraction air velocity: min. 20 m/sec, required capacity: approx. 65 m³/min Compressed air: 6 bar, 1/4" - consumption approx. 300 l/min, required minimum pressure: 4.5 bar, all workpiece blow-off lines are line-controlled.

Condition: used, Holz Her Accura 1556 Premium Heavy-duty version with full equipment Edge thickness 0.4 – 20 mm 18.5" touchscreen control in 16:9 format, rotatable and tiltable Synchronized belt bridge with motorized, position-controlled height adjustment Long, motor-driven adjustable infeed fence Pre-milling unit for panel edge preparation before the glue station, with 2 NC servo axes Syncro edge magazine, fully automatic for rolls and strips MOT3, with 2 motorized hold-down devices GLU-JET automatic glue application station; for cartridges and PUR bonding, thin film technology Glue height adjustment / touch nozzle Maximum edge height: 60 mm Pressure unit with 4 motor-pneumatically driven rollers, NC servo axis End trimming unit for rolls and strips up to 20 mm edge thickness, with electro-pneumatic adjustment of the trimming saws from 0–10° angle Flush trimming unit 20 mm MOT3, motorized horizontal adjustment Multifunction milling unit MOT6 with multifunctional milling technology Flush trimming 8 mm Radius milling R1, 3; R2 (2x) Chamfer milling up to 45° Ndedpfx Aoxy Nxysdnsd Copy-milling unit MOT4, with automatic tool changer MOT2 and oscillating tracer, corner copying, postforming corners, with 4 NC-controlled axes; for top/bottom longitudinal edge milling and copy-milling of front/rear end vertical edge. Working height 60 mm. R1, 3; R2 (2x); chamfer 45° Scraper unit MOT8 incl. high gloss package and fully automatic tool changer, R1; R1.3; R2 (2x); chamfer 45° Nesting package Flat scraper unit with pre- and post-scanning Usage-controlled, oscillating buffing unit for post-processing and edge polishing with 2 textile wheels Spraying units for infeed and outfeed, plus antistatic agent for pressure unit Infeed area electronically controlled separating agent spray device Pressure unit electronically controlled antistatic spray device Outfeed area electronically controlled cleaning agent spray unit with cleaning fluid Automatic chain lubrication Barcode scanner The machine is FACTORY-SERVICED and in TOP CONDITION Year of manufacture: 2021 / Leasing possible The machine is connected and ready for demonstration in the showroom Available from stock Lieboch

Condition: used, OTT Tornado - TOP Control system: via a 15-inch color touch monitor for full automation and maximum operator comfort. CM-CombiMelt gluing system suitable for processing EVA and PUR hot-melt adhesives as well as all standard cleaning granulates. Jointing station for edging chipboard panels. Automatic roll magazine. Automatic edge magazine. Ndedpfsxy Iw Ujx Adnsd Double end-trimming unit with automatic swivel 0° / 3°. Flush trimming unit for flush trimming up to 12 mm. Fine radius trimming unit – profile cutters R2 – R5. Automated copying and corner rounding unit. Scraper unit – radius. Scraper unit – radius and chamfer. Surface scraper unit. Sliding agent spray unit – PU. Cleaning set with fine buffing unit. Very stable workpiece support with roller conveyors – front with scissor extension. Complete tool set included. The machine is LIKE NEW and in EXTREMELY WELL-MAINTAINED CONDITION. First commissioned in 2009, very low operating hours – approx. 1,600. Machine from lease return / leasing option available. Available from stock in Lieboch.

Condition: excellent (used), Felder G360 Edge Bander, Pre-milling cutters, Ndsdpfxoxy Iwbs Adned Glue application by roller, Pneumatic pre-cut guillotine, Pressure rollers, Finishing saws, Top and bottom milling unit R1 – R2, Profile scraper, Polishing unit Edge thickness: 0.4–3 mm, Max. panel height: 45 mm, Feed speed: 7 m/min, Total power requirement: 2.8 kW, Machine length with table: 290 cm, without: 240 cm.

Condition: excellent (used), Year of construction: 2022, operating hours: 41,000 h, functionality: fully functional, SCM edge banding machine equipped with servomotors. In excellent condition, but we are switching to another brand... 12" touchscreen control panel Three spray stations (infeed, central, and polishing outfeed) Servo-driven adjustment of infeed fence Servo-driven adjustment of workpiece height DIA tools (60 mm height) on the pre-milling unit Nsdoxy Ht Uepfx Adnjdd SGP-E glue pot with upper guide End trimming unit with the possibility of R-edge trimming Milling unit with stepless adjustment of R1/R2 radius Scraper unit with stepless adjustment of R1/R2 radius Corner rounding unit with stepless control via the system The machine is still in operation Price negotiation possible...

Condition: excellent (used), Year of construction: 2017, Technical data will be updated soon. Nedpfxoxyu Umo Adnodd

Condition: good (used), Year of construction: 2005, functionality: fully functional, workpiece height (max.): 45 mm, total width: 1,402 mm, edge thickness (max.): 6 mm, total height: 1,565 mm, overall weight: 850 kg, type of input current: three-phase, compressed air connection: 6 bar, input voltage: 400 V, extraction nozzle diameter: 70 mm, input frequency: 50 Hz, extraction connection diameter: 70 mm, pneumatic connection: 6 bar, product height (max.): 45 mm, pressure: 6 bar, operating pressure: 6 bar, 2005 Holz-Her Sprint 1310 Edgebanding Machine Machine Type: Edgebanding Machine Year: 2005 Condition: Good Compact, Reliable, and Precise – Holz-Her Quality Edge Finishing For sale: 2005 Holz-Her Sprint 1310 Edgebanding Machine in very good working order. The Sprint 1310 delivers exceptional edge processing accuracy and finish quality in a compact footprint, making it ideal for cabinetmakers, joiners, and furniture manufacturers who need reliable, professional edge processing. Built in Germany by Holz-Her, the Sprint 1310 combines industrial strength and precision control with intuitive operation via its advanced HOLZ-HER PLC touchscreen interface. ⚙️ Technical Specifications – Holz-Her Sprint 1310 Model: Holz-Her Sprint 1310 Year: 2005 Edge Thickness Range: 0.4 – 6 mm Workpiece Height Range: 10 – 45 mm Min. Workpiece Length: 180 mm Min. Workpiece Width: 60 mm Feed Speed: 8 m/min Max. Edge Thickness (per side): 3 mm Glue System: 1905 Multi-System (for EVA or PUR adhesive cartridges and granules) Pressure Section: Two rollers with pneumatic control End Trimming Unit: Dual saws with 0.22 kW motors (swinging for corner trimming) Multifunctional Trimming Unit: Two HF motors (0.6 kW each) for flush, radius, or chamfer trimming Scraper Units: Radius scraper and surface scraper (optional motorised adjustment) Buffing Unit: Twin polishing wheels for high-gloss finishing Control: PLC control with clear text display and graphic support Dust Extraction Ports: Ø 70 mm (trimming, scraping, and buffing units) Pneumatic Pressure: 6 bar Machine Dimensions (L × W × H): approx. 2174 × 1402 × 1565 mm Weight: approx. 850 kg Condition: good 🌟 Key Features and AdvantagesHigh-Performance Edgebanding for All Materials Perfect for PVC, ABS, veneer, melamine, and solid wood edging. Quick-Change 1905 Glue Application System Accepts EVA or PUR glue in both cartridge and granulate form – quick heating and precise application. Powerful Pressure Section Dual pressure rollers ensure a tight, seamless bond between edge and panel. Compact and Efficient Design Saves valuable workshop space while maintaining full professional functionality. Integrated PLC Touchscreen Control Large LCD display with program memory, clear text messages, and graphic function guidance. Clean Finishing Units Includes radius scraping, surface scraping, and buffing stations for a perfect finish. Durable Construction Built on a robust, precision-ground steel frame for long-term stability. 🪚 Typical Applications Cabinet and furniture manufacturing Joinery and interior fit-out workshops Kitchen, office, and shopfitting panel finishing ABS, PVC, veneer, and solid edge processing Why Choose This Holz-Her Sprint 1310 Renowned German build quality from Holz-Her. Versatile – handles multiple edge types and thicknesses. Compact, reliable, and simple to operate. Excellent finish quality with low maintenance needs. Good condition. Available for viewing by prior appointment Holz-Her Sprint 1310 for sale 2005 Holz-Her Sprint 1310 edgebander Used Holz-Her edgebanding machine Ireland Holz-Her Sprint 1310 specifications Holz-Her 1310 edge banding machine Sprint 1310 EVA PUR glue system Nsdpfx Ajxyuqbednodd Used edgebander for furniture production Holz-Her Sprint 1310 PLC control Compact automatic edgebander Holz-Her Used woodworking machinery Ireland Holz-Her Sprint 1310 edge finishing machine Used Machine Tools Ireland edgebanders

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, total length: 5,250 mm, workpiece height (max.): 40 mm, total width: 1,445 mm, edge thickness (max.): 12 mm, total height: 1,600 mm, overall weight: 1,550 kg, type of input current: three-phase, input voltage: 400 V, power: 12 kW (16.32 HP), input frequency: 50 Hz, product height (max.): 40 mm, 2017 EBM KDP 117 SLK-P Edgebanding Machine Machine Type: Edgebanding Machine Year: 2017 Condition: Very Good Precision German Engineering – Complete Edgebanding Solution For sale: 2017 EBM KDP 117 SLK-P Automatic Edgebanding Machine in very good condition. Built for precision, durability, and efficiency, this professional edgebander provides perfect edge finishing for panels in wood, MDF, and laminate. Ideal for kitchen, furniture, and joinery manufacturers, it combines high-frequency trimming, pre-milling, and finishing aggregates for consistent, high-quality results. ⚙️ Equipment and Features Pre-milling aggregate (200 Hz) with DIA tooling included – ensures perfectly clean panel edges. Quick-melt glue pot (maintenance-free) – 6-minute preheat, automatic glue feed, synchronized or counter-rotation modes, and self-cleaning stirrer. Tape table with strip magazine – for thick edge banding material. Pneumatic roll trimmer – trims edges up to 3 mm thick with clean accuracy. Workpiece distance control lamp – for precise feeding and safe operation. HF combined router station (300 Hz) – high-frequency trimming with perfect corner transitions. Safety hood locking – opens only after end-trim saw comes to a complete stop. HF top/bottom trimming station (300 Hz) – smooth top and bottom finishing. Second top/bottom trimming station – for finer post-processing. Corner chamfering router – for 3D edge corner rounding. Njdpfx Aexyt D Hjdnodd Radius scraper – ensures seamless edge transitions. Surface scraper – removes glue residues and imperfections. Buffing station – final polishing for high-gloss edges. Electronic converter – stable speed control for all high-frequency units. Transport chain and double roller top pressure beam – consistent panel feed with perfect alignment. Integrated catch-up container – collects excess edge banding material. Extendable panel support fence – supports large or wide panels. Ø 140 mm dust extraction outlet – efficient chip and glue removal. Ergonomic control centre – PLC touchscreen interface for easy programming and operation. AMD Fiulair Air Dryer 📐 Technical Data Model: EBM KDP 117 SLK-P Year: 2017 Max. Edge Thickness: 3 mm / 8 mm / 12 mm Workpiece Height (min./max.): 10 mm / 40 mm Min. Workpiece Length: 200 mm / 300 mm Min. Workpiece Width: 80 mm Feed Speed: approx. 10 m/min Ready for Operation: in approx. 6 minutes Power Consumption: 12 kW Electrical Connection: 415 V – 50/60 Hz Work Table Height: 880 mm Dimensions (L × W × H): 5250 × 1445 × 1600 mm Weight: approx. 1550 kg Condition: Very Good 🪚 Key Advantages High-performance German design – engineered for precision and longevity. Fast warm-up time (6 minutes) – ready for production quickly. Full edge processing system – from pre-milling to buffing, in one machine. Touchscreen control panel – intuitive operation and fast setup. Perfect for ABS, PVC, veneer and solid wood edging. Compact footprint – fits efficiently into modern production lines. 🧰 Ideal For Furniture and cabinet production Kitchen and office panel manufacturers Custom joinery workshops Panel edge finishing and refurbishment lines Why Buy This 2017 EBM KDP 117 SLK-P Complete edgebanding line from pre-milling to polishing Very good condition Includes premium aggregates and touchscreen PLC control Available for inspection by prior appointment

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - MAGELIS control system - For EVA-based hot-melt adhesive - Jointing: 2 x 1.5 kW, u=12000, 200 Hz - End trimming: 2 x 0.2 kW, automatic swiveling 0°/3°, 2 HM saw blades 140 mm - Flush trimming: 2.07 kW, with WPL heads HF 70, diameter 70 mm - Radius trimming: R2 - Radius scraper - Surface scraper - Glue pot above - Workpiece dimensions: - Minimum width: 70 mm - Thickness: 8-42 mm - Minimum length: 150 mm - Edge thickness: 0.2-6 mm - Feed rate: 12 m/min - Extraction port: 160 mm Ndjdpfxsxymfws Adnod Dimensions: 4,500 x 1,250 x 1,300 mm Weight: 1,650 kg Availability: short notice Location: Baden-Württemberg

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived in 2025) MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Technical specifications: Edge thickness for rolls: 0.4 - 3 mm (depending on material) Edge thickness for strips: 0.4 - 8 mm (depending on material) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (Restrictions may apply to individual units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner rounding) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: Motorized pressure bridge adjustment Extendable workpiece support XL, 600 mm spacing 3-color LED light in the infeed Motorized adjustment of the infeed guide Long infeed guide 1252 mm Nedsxymd Tepfx Adnsdd I-Tronic package Edge Control PPC 322 W IntelliSet: intelligent Tool correction f.a.s.t = fast setting technology ECO mode Energy saving mode Prepared for RETURN connection (third-party manufacturer) BS 501 guide system; right-angled workpiece feeding for front edge banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece thickness: min. 60 mm - Workpiece length: approx. 140 - 450 mm FG201 jointing unit with 2 64 mm high milling heads MG 301 edge feeder GluJet GJ 725 NC PUR PRO adhesive application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° pivoting for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reactant (water molecules) from the PUR, allowing the PUR adhesive to remain in the system without curing. The vacuum pump operates independently of the machine's power supply and automatically compensates for any vacuum loss. - PUR fully under control! DW 301 printing unit with motorized NC axis; 1st roller driven by pneumatic plunge control, 2 conical pressure rollers GM301 spray unit after printing unit with lubricant for high-gloss edges KA 501 pneumatic trimming unit (60 mm) Extraction hoods for trimming unit FR301 MOT6 multifunctional trimming unit Shelf program FF 301 MOT1 profile trimming unit ZK301 MOT4 scraper unit including high-gloss package FK702 surface scraper Complete spray unit for separating and cleaning agent GM 301 spray unit after printing unit (high-gloss edges) SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: Short-term Storage location: Hochheim

Condition: good (used), Year of construction: 2010, 0,4 - 5 mm Nodpfx Adoxylpuenedd Workingpiece thickness from to 8 - 60 mm Total length 2814 mm Feed speed 11 m/min.

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Storage location: Nattheim Ndodpexyiiljfx Adnod

Condition: new, Year of construction: 2024, functionality: unexamined, machine/vehicle number: 1000065502, Single Sided Edgebander Stream B 9.5 with: premilling unit, gluing unit with EVA-EVA REAL TIME GLUING SYSTEM WITH PRE MELTER (dual EVA gluing system consisting of two independent glue heads tahat allows for real time colo switching without the need for manual glue head changes), 6 position edgebanding containers, edn trimming unit, rough milling unit, fine trimming unit, corner rounding unit, universal milling unit, edge scraper, glue scaper, brushing unit, phon. Nsdpsxyf Nzsfx Adnedd

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 with gluing unit for hot-melt adhesive granules Glue reservoir located below the glue roller Glue application to the workpiece via glue roller in both co-rotating and counter-rotating modes automatic edge magazine for coil material and fixed lengths Pressure zone with pneumatically-driven main pressure roller and special post-pressure rollers to compact the upper and lower glue joint Centrally adjustable upper pressure Central manual chain conveyor lubrication Control panel at machine infeed End trimming unit (saw aggregates) for front and rear edge overhang with high-precision linear guides 2 motors, each 0.18 kW Swivel range for straight and bevel cutting 0–15 degrees Flush-milling unit, top and bottom, with vertical and horizontal tracing Swivel range 0–15 degrees with 2 milling motors, each with replaceable insert cutter combinations (straight/radius) Digital counters enable rapid and precise, i.e., repeatable, settings Two-point pneumatic adjustment for upper and lower milling motors Scraper unit for finishing processing with horizontal/vertical tracing Support table extendable up to 350 mm Integrated section control for contactless operation of processing functions. Ndjdpfx Aoxya Rtednsd Settings via keyboard and LED display Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Availability: short term Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2007, This CEFLA ROCTRE W was manufactured in 2007. A fully refurbished edgebander, it offers stable performance and reliability, ready for immediate use. Maintaining the original structure's strength, it's ideal for those needing a ready-to-run solution without further restoration. Contact us for more information. Ndedpfx Aoxyayuodned Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: AH/105752, feed rate X-axis: 18 m/min, workpiece height (max.): 60 mm, control type: PLC-controlled, TECHNICAL DETAILS Nodpfx Aoxx Nf Dednjdd Panel height: 10–60 mm Solid wood: 15 mm PVC/ABS: 3 mm Feed speed: 12–18 m/min Working height: adjustable via PLC MACHINE DETAILS Control: PLC EQUIPMENT Adjustable panel support guide Side roller conveyor with idler rollers for panel support Rectifier group Roller holder plate Gluing unit for EVA adhesive with premelter Edge pressing group Trimming group Scribing group with overlapping motors Tiltable copy unit Rounding unit with 4 motors Edge scraper unit Glue scraper unit Oscillating brush group

Condition: used, Year of construction: 2014, Used Machine Single-sided Edge Banding Machine Brandt Optimat KDF 220 C (Ambition 1220 FC) Year of manufacture: 2014 Machine number: 0-261-20-7913 Fixed fence on the right side Infeed fence adjustable manually Feed speed: 11 m/min Max. feed speed with contour trimming: 11 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Nsdsxx D D Uopfx Adnodd Workpiece and edging parameters: Minimum workpiece width: - For workpiece thickness 8-22 mm: 70 mm - For workpiece thickness 23-60 mm: 120 mm Workpiece overhang: 38 mm Workpiece thickness: 8 - 60 mm Max. edge height = workpiece height + 5 mm Edge material in roll form: 0.4 - 3 mm Max. edge cross-section: - For PVC: 135 mm² - For veneer: 100 mm² Max. roll diameter: 830 mm Edge material in strip form: 0.4 - 3 mm Max. edge cross-section (strip): 165 mm² Edge thickness up to 6 mm possible by adjusting the pressure zone Equipment configuration: Jointing cutter unit 2 x 2.2 kW 200 Hz (with and against feed) Gluing unit A3 with workpiece pre-heating End trimming unit, chamfer/straight 2 x 0.18 kW Milling unit 2 x 0.27 kW (counter rotation) Contour copying router unit (corner rounding) 1 x 0.35 kW WD 40 Profile scraper with quick-change heads Glue joint scraper 5820 Control system: Easytouch Dimensions: approx. 4280 x 1300 x 1170 mm Weight: approx. 1,400 kg Availability: short notice Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, feed rate X-axis: 14 m/min, workpiece height (max.): 55 mm, controller model: TS 200 Touchscreen, TECHNICAL DETAILS Panel height: 55 mm Solid wood: 8 mm PVC/ABS thickness: 0.4–3 mm Feed speed: 14 m/min MACHINE DETAILS Control: TS 200 touchscreen Nodpfsxxy Hfsx Adnjdd EQUIPMENT Guide rail for panel insertion Side roller conveyor with idler wheels Roller holder plate Glue unit for EVA hot-melt adhesive with glue pot Edge pressure group for straight profiles with adjustable pressure rollers End cutting unit with 2 motors and tilt adjustment Fine trimming/trimming unit with 2 tilting motors Corner rounding unit with 2 multifunctional motors (Gleaner + Rounder) Edge scraper group Glue scraper group Brush unit Adjustable working height

Condition: used, Year of construction: 2017, machine/vehicle number: MR005128, Lightly used edge banding machine with gluing unit, end trimming unit, and flush trimming unit. Suitable for edge banding up to 2 mm thickness and panels up to 50 mm thick. Technical specifications: - Minimum edge band thickness: 0.4 mm - Maximum edge band thickness: 2 mm - Minimum panel thickness: 12 mm - Maximum panel thickness: 50 mm - Minimum panel length: 180 mm - Minimum panel width: 65 mm - Feed speed: 6 m/min - Glue reservoir capacity: 0.5 kg - Pre-milling unit: No - End trimming unit: Guillotine knife - Serial number: KK /138932 Njdpfx Aoxxx Dijdnodd

Condition: new, Year of construction: 2025, The new SICAR ECO F7 edgebander model distinguishes itself from other compact edgebanders because all functional modules of the Eco F series are derived and suitably modified from the industrial edgebanders. Although it possesses the same high precision and stability as industrial machines, it retains maximum durability and processing efficiency. The Eco F series saves space and ensures excellent edge-banding quality. It is the ideal choice for small furniture factories, decorators, and joinery workshops; it is also extremely useful for small-batch production in large furniture factories. Equipment includes: – Infrared heating lamp – Glue scraper – Meter counter – Cleaning fluid – Separating agent Total power: 10.3 kW Calibrating motor power: 1.8 kW*2 Glue application motor power: 0.75 kW Heater power: 1.5 kW Cutting motor power (end trim saw): 0.37 kW*2 Trimming motor power: 0.75 kW*2 Polishing motor power: 0.37 kW*2 Njdsxxxilopfx Adnjdd Conveyor motor power: 1.5 kW Working speed: 8-11-13 m/min Max. edge band height: 45 mm Panel thickness: 10-45 mm Edge band thickness: 0.4-3 mm Min. panel width: 80 mm Working air pressure: 0.6-0.8 MPa Machine dimensions: 4580x700x1300 mm Packing dimensions: 4280x650x1280 mm Net/gross weight: 1000/1230 kg 12-month warranty Transport and installation provided within Serbia

Condition: new, feed rate X-axis: 7 m/min, workpiece height (max.): 50 mm, type of input current: three-phase, input voltage: 400 V, With corner copying, suitable for plastic edges from 0.4 - 3 mm, solid wood edges up to 3 mm, and workpieces from 8 - 50 mm, with pneumatic adjustment. Panel thickness: 8 – 50 mm Edge thickness: 0.4-3 mm (coil material) Jointing unit: Yes Radius milling unit: Yes Corner copying unit: Yes Scraper: Yes Buffing unit: Yes Premium equipment for high productivity with minimal space requirements! Intuitive operation with eye-S control and 10" large touchscreen: HMI Maestro Active Edge; graphical representation of all processing units and their operating status; graphical simulation of operations; control of all processing units; regulation of glue pot temperature; assistant functions for machine setup according to the processing program; error diagnosis for quick resolution of simple faults; statistics on processing parameters; USB connection; network connectivity ready; prepared for Industry 4.0 with API REST data transfer protocol. Outstanding accessibility to work units thanks to the large hood, which also provides protection and noise reduction Monoblock steel construction ensures high stability and rigidity of the machine Automatic unit positioning when changing panel thickness Cut-off saw unit with corner rounding (me 35 tr s): for trimming the edge and rounding corners on the top and bottom; for edging solid wood, trimming is done with the radius milling cutter; high-frequency motor with 12,000 rpm; saw blade Ø125mm Z12 Panel feed via feed chain with rubber sliding shoes Extendable workpiece support Adjustment of infeed fence via spacer plates Dimensions and Weights Length (product) approx. 3314mm Width/depth (product) approx. 1085mm Height (product) approx. 1300mm Weight (net) approx. 623kg Nsdpfsxxvansx Adnsdd Flush radius milling unit Rated output: 2 x 0.35kW Cutter diameter: HW55.3mm Spindle speed: 12000min⁻¹ Extraction port diameter: 60mm Number of extraction ports: 2 Corner copying unit Rated output: 0.35kW Tool diameter: 58mm Speed: 12000min⁻¹ Electrical data Connection voltage: 400V Mains frequency: 50Hz Glue unit Glue pot rated output: 0.25kW Glue pot operating temperature: 190°C Glue pot extraction port diameter: 60mm Glue pot capacity: 0.8kg Pneumatic connection Operating pressure: 6.5bar Air consumption: 470l/min Feed Feed rated output: 0.55kW Feed speed: 7m/min Edges Edge thickness (coil material): 0.4 – 3.0mm Pre-milling unit Extraction port diameter: 2 x 80mm Rated output: 3kW Cutter speed: 7200min⁻¹ Diamond cutter diameter: 80mm Cutter height: 56mm Material removal: 0.5 / 1 / 1.5 / 2mm Scraper units Radius scraper: 2mm Buffing unit Rated output: 2 x 0.14kW Speed: 2800min⁻¹ Workpiece Workpiece thickness: 8 – 50mm Minimum workpiece length: 120mm Minimum workpiece width: 110mm

Condition: new, Year of construction: 2023, functionality: fully functional, total length: 3,774 mm, edge thickness (max.): 3 mm, overall weight: 842 kg, plate height: 50 mm, For plastic edges from 0.4 - 3 mm, solid wood edges up to 5 mm, and workpieces from 8 - 50 mm. Panel thickness: 8 – 50 mm Edge thickness: 0.4-3 mm (coil material) Jointing unit: Yes Radius milling unit: Yes Scraper: Yes Buffing unit: Yes Top configuration for high productivity in a compact footprint! Intuitive operation with the eye-S control and 10” large touchscreen: HMI Maestro Active Edge Graphic display of all processing units and their operating status Graphical simulation of machining operations Control of all processing units Regulation of glue pot temperature Assistance functions for machine setup according to the machining program Error diagnostics for rapid troubleshooting of simple issues Statistics on machining parameters USB port Prepared for network connection Excellent accessibility to working units thanks to the large hood, ensuring protection and noise reduction Automatic positioning of units when changing panel thickness Panel feed via chain conveyor with rubber slip shoes Quality made in Italy Equipment details 10" touchscreen control panel Optimum machine management with the new 10" touchscreen control panel featuring Maestro Active Edge, visually representing all machine functions Pre-milling unit Two diamond-tipped cutters Glue station Glue is quickly and evenly heated by heating rods located in both the glue pot and the glue application roller Automatic temperature reduction during prolonged machine idle times Teflon-coated glue pot for easy glue changes Device for reusing unused glue Automatic application of edge banding from coils with cut-off knife for edges up to 3 mm Rotary table with Ø 730 mm Self-lubrication of the glue pot Quick-change kit for the glue pot Flush/radius milling unit With horizontal and vertical tracing rollers for optimal tool positioning Ndsdsxxuvbepfx Adnod Equipped with combination milling tool Ø 55.3 mm for flush milling of edges up to 5 mm and radius edges up to 2 mm Precise adjustment via 2 digital displays With chip extraction Surface scraper Absolute cleanliness for perfect finishing of the workpiece surface With rotating copying device Buffing unit Powered by two independently swiveling and height-adjustable motors For perfect cleaning and polishing of panel edges Profile scraper With digital position display For perfect finishing of plastic edges With device to retract the unit when it is not needed Edge magazine For automatic application of strip edges Solid wood strip edges are automatically loaded and synchronized with the panel feed