Edgebander

Ott TopEdge DUO

OTT Edgebanding Machine, TYPE TopEdge DUO
Operating mode: Single-sided, right-hand configuration.
For applying and processing:
Veneer, plastic, and solid wood edges.
Edge thickness: 0.2 - 25 mm
Workpiece dimensions: Width minimum 60 mm
Height minimum 8 mm
Height maximum 80 mm
Length minimum 150 mm
Feed speed: 10 – 20 m/min – stepless

Machine dimensions: Machine height: 1,750 mm
Machine width: 1,300 mm
Machine length: 12,700 mm
Machine weight: 6800 kg

Trans-Start – OTT workpiece feeding system with automatic, angle-accurate transfer to the feed system of the
edgebanding machine, consisting of:
– extended infeed guide rail with additional clamping
– angle insertion aid (small parts, manual)
– top-mounted, infeed system – driven

Joint from the center 2 x 3KW

AKF – Automated
Copy milling
with two separate spindles for the top and bottom.
For radius processing of the front and rear
end faces or postforming processing.
Milling heads equipped with two automated
adjustment axes for depth and end face adjustment, as well as
with automated edge thickness adjustment.
Fjdpfxj Ai T Nvo Acijpp
Detailed settings can be stored in work programs.
With 2 PCD diamond radius tools Ø 73 x 13 x Ø 16
2 HF motors 0.37 kW, 12000 rpm, 200 Hz.
With integrated extraction system.
Unit prepared with a quick-change system for
special profiles!

4-way radius trimming unit

- DUO-Combi-Melt
Gluing system
Two Combi-Melt gluing systems with pressure zone and
trimming device,
both equipped with a WRT 125 A exchange hopper system.
First station: PUR glue, transparent
Second station: PUR glue, white
First pressing zone equipped with:
A large pressure roller and six follow-up rollers.
Second pressing zone equipped with:
A large pressure roller and three follow-up rollers.
Both gluing systems can be controlled independently.
Any number of work programs can be stored alphanumerically, with all pre-selections for the
processing units as well as work parameters for the Combi-Melt gluing system for full automation and maximum
ease of operation.

1 x Double magazine
1 x 8+1 edge magazine

Trimming unit for thin boards and processing with high edge overhang
Spraying units GS, AS, RS with texture finish
Preparation for return system
Angle insertion aid
Grooving units

Special pressing unit for processing solid wood strips up to 25mm thick.

Pictures are only partially original images!

The listing was translated automatically. Translation errors are possible.