HDB Distribution GmbH

Condition: used, functionality: fully functional, Year of construction: 1998, control type: NC control, degree of automation: semi-automatic, actuation type: electric, working width: 3,050 mm, Equipment: CE marking, emergency stop, Used motorised folding machine Iedpfxoxxq Uyj Ad Dstp Manufacturer: Schechtl Year of manufacture: 1998 Capacity: 3050 x 2.00 mm at 400 N/mm² The machine has a rear support table, but no backgauge. Photos were taken at the customer site as the machine is still in operation. No warranty or guarantee is provided for used machines. The purchase is handled directly with the seller. The machine can be inspected in the Aschaffenburg area by appointment. Available from approximately February 2026.

Condition: ready for operation (used), Year of construction: 1984, sheet width 3040 mm plate thickness 4 mm distance between columns 3040 mm stroke of upper beam 200 mm adjustment of lower and bend clamping 100 mm total power requirement 6,4/3 kW weight of the machine ca. 6,3 t dimensions of the machine ca. 4,3 x 1,2 x 1,8 m Motorized folding machine with double-sided bending beam drive, lower, upper and bending beam adjustable, drive motors as brake motors - slip clutches as Iodpsxwzbbjfx Ad Detp overload protection, bending angle adjustment via potentiometer, operating modes: individual switching for each work step and sequence control for the complete work cycle, SEGMENTED TOP RAIL 120 mm height (Photo 7). As usual, the sheet thickness is based on a strength of 40 kg / mm². Machine dealer with own stock of 2500 m².

Condition: ready for operation (used), Max. working width: 3060 mm For sheets (at 40 kg strength) up to: 4 mm Min. bending radius: sheet thickness x 1.25 Min. inside flange height: sheet thickness x 6 Upper beam opening width: 220 mm Lower/bending beam adjustability: 90 mm Max. bending angle: 180° Stroke speed down/up: 40/60 mm/s Hydraulic drive: 380 V, 7.5 kW Weight: 4.3 t Iodsxwnltjpfx Ad Dotp Required space: 4150 x 1800 x 2500 mm

Condition: refurbished (used), functionality: fully functional, control type: CNC control, actuation type: electric, controller model: System 6000 Touch, working width: 3,200 mm, number of axes: 5, type of crowning: CNC-controlled, sheet thickness steel (max.): 3 mm, back gauge adjustment: CNC-controlled, back gauge: 3,050 mm, Equipment: documentation/manual, emergency stop, foot remote control, RAS Flexibend 73.30 MB 6000 Touch (automatic crowning / folding beam) Technical data: max. sheet thickness: 3.0 mm (steel sheet) max. working width: 3200 mm Weight: 4.3 t Backgauge: 1550 mm CNC standard (optional L-backgauge extension up to 3050 mm) Itedpjxu Enajfx Ad Dop Condition: reconditioned (overhauled) (new spindle oil, new toothed belt on upper beam, reworked backgauge, etc.) Equipment: Automatic crowning in folding beam, movable foot switch on rail

Condition: used, Motorized folding machine ONISMA S.A. Spain Type: P 3 x 10 Number: 2815 Itsdpfjxu Eg Aox Ad Dop 3000 x 10 mm Dimensions: 4360 x 2400 x 2470 mm (height)

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: CYBELEC, controller model: CYBTOUCH 15 2D, working width: 3,100 mm, throat depth: 450 mm, number of axes: 4, type of crowning: CNC-controlled, overall weight: 7,600 kg, total length: 4,360 mm, total width: 2,760 mm, total height: 1,745 mm, power: 11 kW (14.96 HP), input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Hydraulic Press Brake / HYBRID COMFORT PLUS 135T 3m: Pressing force: 135T Bending length: 3,100 mm Distance between uprights: 2,600 mm Stroke: 265 mm Throat depth: 450 mm Maximum opening: 470 mm Ram height: 925 mm Descent speed: 190 mm/s Return speed: 140 mm/s Working speed: 10 m/s Machine dimensions: 4,360 x 1,745 x 2,760 mm Weight: 7,600 kg Motor power: 11 kW Standard features: 4-axis (Y1, Y2, X, R) motorized backgauge for precise and fast positioning Cybelec CYBTTOUCH 15 2D CNC controller Monoblock welded steel frame ensures rigidity and durability Promecam quick-release tool clamping system for tool changes without downtime High-precision linear guides for consistently accurate bending FIESSLER AKAS front and rear laser safety system for safe operation Integrated standard tooling: 85° punch and Multi-V die along the full length LED lighting for optimal visual comfort Premium European hydraulic components by Höerbiger Motorized crowning for consistent bending across the entire length Two front sheet supports included Available options: High-precision hydraulic crowning Pneumatic or hydraulic tool clamping systems (compatible with your existing tooling) Motorized bending aids for easy handling of long or heavy parts Extended rear backgauge for oversized workpieces Rear backgauge with up to 6 or 8 axes for increased flexibility Wide lower table suitable for multi-V tooling Additional fingers for rear backgauge Offline programming interface for job preparation from a PC Full robotic automation for bending processes to maximize productivity Machine manufactured in Turkey. The machine can be viewed and tested by appointment at our facility in Bréal-sous-Montfort (35). Ijdpfx Adsxukbrs Djtp We can also provide demonstration videos or organize a live video presentation to show the machine in operation. Feel free to contact us for any additional information. Price on request. Delivery, unloading, and commissioning available on request.

Condition: ready for operation (used), Year of construction: 2002, sheet width 3220 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 1.0 mm upper clamping bar adjustment 160 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm bending speed 120 Grad/sec back stop - adjustable 10.0 - 1.000 mm adjustment speed 300 mm/sec compressed air 6.0 bar work height max. 869 mm control POS 2000 voltage 400 V total power requirement 10.4 kW weight 5950 kg range L-W-H 4565 x 2950 x 2163 mm current list price ~ 150.000 Euro with excellent features (!!) Features: - CNC electromotive universal swing bending machine * High-precision mechanics with modern control technology * For individual and series production * Robust high-speed machine with high axis speeds * Torsion-resistant welded construction - Rotating upper beam / as an automatic tool changing system * With 2 tool stations (sharp and goosefoot bending rails) * Reduces setup and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model "POS 2000" * Control panel front right (operable with PC mouse) * Color display * USB interface * Automatic cutting calculation * Material and tool library * Dimensionally accurate bending simulation * Windows XP operating system * Swiveling control panel, front right - Servo-inverter-controlled drives * For bending/upper jaw & electric backgauge - CNC electro-motorized lower jaw adjustment - CNC electro-motorized backgauge * Travel speed 300 mm/sec. * With rear sheet metal support surface - 1x freely movable double foot switch - Operating instructions Optional accessories included: - 1x 30° upper tool sharpening rail - 1x split set of upper tool gouge rail Iedpfxsxr Rbas Ad Detp - 2x bending rails

Condition: good (used), functionality: fully functional, Year of construction: 2012, Hydraulic Swivel Bending Machine Make: HOCHSTRATE Model: 3000/6 Year: 2012 Technical Data Manufacturer: HOCHSTRATE Model: 3000 x 6 Year of manufacture: 2012 Sheet width: 3040 mm Bending capacity: 6 mm (400 N/mm²) Stroke: 250 mm Motor power: 7.5 kW Dimensions: approx. L 4.8 x W 3.0 x H 2.20 m Weight: approx. 6.5 t Equipment • Controlled backgauge 100–1000 mm • Pneumatic upper tool clamping • Motorized bending beam adjustment • CNC-controlled crowning • Adjustable clamping pressure • Segmented gooseneck rail, H 130 mm • Bending rail 30 mm • Continuous sharp rail 45° • Operating manual All information without guarantee. Isdpfx Aexr Eaqod Dstp A demonstration is possible at any time in our exhibition hall.

Condition: good (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schröder and a folding machine from the top manufacturer RAS from Sindelfingen. Machine features: - Cuts (see nameplate) up to 2.5 mm steel - Working length: just over 2 meters - Back gauge: 500 mm - Side/angle gauge - Extendable front support - Foot pedal - Reversible blade - Weight approx. 1300 kg This machine comes from the insolvency of an aluminum parts manufacturer who primarily supplied the automotive industry — has been tested, cleaned, can be inspected and tested — warranty excluded. RAS Folding Bench: - Capacity: 2.5 mm steel, more for aluminum - Bending length: just over 2 m - Adjustable depth stop from the front, can also be used as an excellent sheet support Ijdpfx Adexqpiys Dstp - Hand and foot control - Machine comes from a reputable company and has been professionally checked before sale - Weight: see photo - Optional: a segmented rail (segment bar) from RAS is also in stock - Invoice with VAT shown separately - Shipping can be arranged upon request Free loading as shown in the pictures Inspection and testing are possible by telephone appointment — 0175 248 1975. Payment in cash upon collection — if there’s anything else I can do for you, please give me a call. Thank you. Collection should take place within 8 days after the end of the auction. Location: 97261 Güntersleben

Condition: good (used), You are bidding here on a machine set from Schechtl with a capacity of 3mm. Machine Specifications: Schechtl MAB - Bending length: slightly over 2 meters - Sheet thickness: 3mm steel, more for aluminum - Optional: new boxed segment set; used set with significant wear is included free of charge (the machine was used in a training workshop) - Current new price: see pictures - Hand and foot operation - Optional: back gauge and additional rails Guillotine Shear MSB 200 - Cuts 3mm steel, significantly more for aluminum - Cutting length: slightly over 2 meters - Front gauge - Back gauge: 750 mm - Optional: sheet metal tray Free loading available New price for such a set is approx. €80,000 net (without accessories) You will receive an invoice with VAT shown Shipping can be arranged upon request Free loading as shown in the photos Inspection and test run available by appointment – please call 0175 248 1975. Payment in cash upon collection; if you need anything else, feel free to call me – thank you Collection should occur within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Ijdpoxqmmiefx Ad Djtp Item numbers: 251007 and 251008

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, Equipment: documentation/manual, Technical data: Useful length: 3240 mm Performance at 400N/mm2: 6.00 mm Stroke of upper beam: 1030 mm Bending beam adjustment: 180 mm Drive power upper beam: 2x 9.45 kW Drive power bending beam: 2x 9.42 kW Upper beam Upper beam pre-stop from 15 mm Geometry: 180° Hydraulic tool clamping (WZS 5000) Bending beam Up’n Down bending beam, program-controlled Pneumatic clamping WZS 7000 Motorized bending beam adjustment 180 mm Motorized bending center adjustment 100 mm Motorized central crowning Isdpfexn Dhlex Ad Detp

Condition: ready for operation (used), Year of construction: 2005, sheet width 3220 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 1.0 mm upper clamping bar adjustment 160 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm bending speed 120 Grad/sec back stop - adjustable ~ 10.0 - 2.000 mm adjustment speed 300 mm/sec compressed air 6.0 bar work height max. 869 mm Itedpoxnqwtefx Ad Dop control POS 2000 total power requirement 10.4 kW voltage 400 V weight 3750 kg range L-W-H 4565 x 2950 x 2163 mm current new price ~ €150,000 from a maintenance workshop with very good equipment (!!) Features: - CNC electro-motor-driven universal folding machine * ??High-precision mechanics with modern control technology * For single and series production * Robust high-speed machine with high axis speeds * Torsion-free welded construction - Rotating upper beam / as an automatic tool change system * With 2 tool stations (sharp and goat's foot bending rails) * Reduces setup and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model "POS 2000" * Touch panel at the front right (can also be operated with a PC mouse) * Color display * USB interface * Automatic cutting calculation * Material and tool library * Accurate bending simulation * Windows XP operating system - Servo-driven control Drives * for bending/upper beam and electric backgauge - CNC electric lower beam adjustment - CNC electric backgauge * Travel speed 300 mm/sec. * With rear sheet support surface (stainless steel sheets) - 1x freely movable double foot switch - Operating instructions (PDF) Special accessories included: - 1x 30° upper tool sharpening rail - 1x split set of upper tool goat's foot rails, H = 130 mm - 1x 10.0 mm bending rail - 1x 25.0 mm bending rail

Condition: good (used), functionality: fully functional, Year of construction: 1990, This high-performance folding machine RAS 67.30 with single program control is from first ownership. Bending capacity: 3200 x 2.5 mm Drive power: 3 kW Machine weight: 3,800 kg Itedpfx Adjxmi Hds Dop Includes: pre-selection of bending angle via rotary potentiometer, second foot switch for two-person operation, good 45° upper bending beam, segmented raised upper bending beam (should be serviced). Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), functionality: fully functional, Year of construction: 2011, Motorized Swing Bending Machine Manufacturer: GEKA, Model: MA 3000x1.5mm Year of manufacture: 2011 Technical Data Brand: GEKA Itedpfxsxl T Hrj Ad Dsp Type: MA 300 Year: 2011 Working length: 3030 mm Sheet thickness: 1.5 mm Motor power: 3 kW Weight: approx. 4 t Dimensions: L 3.90 x W 2.20 x H 1.70 m Equipment - Elgo control P 50 - Manual back gauge 750 mm All information without guarantee. A demonstration can be arranged at any time in our showroom.

Condition: used, Max. bending length: 3200 mm Max. sheet thickness: 4 mm steel Motor-controlled backgauge with folding cams up to 2500 mm with stop extension (disassembled) Motorized bending beam adjustment Multibend 9001 control Segmented upper beam tool with automatic tool clamping (height 100 mm) Itsdpexl Dt Nsfx Ad Dop operation manual Weight: 5800 kg

Condition: new, Year of construction: 2025, STANDARD: Itodpfxjxlnmao Ad Djp Segmented blades with hardened Arkor coating Clamping and bending controlled by joystick Bending angle adjustment with mechanical protractor Manual backgauge Optional: Foot pedal and electrical panel Digital display NC controlled backgauge Motorized backgauge Working length: 3020 mm Bending angle: 135° Capacity (mild steel): 2 mm Clamping motor: 0.55 kW Bending motor: 2.2 kW Length: 3230 mm Width: 1100 mm Height: 1260 mm Weight: 2650 kg

Condition: refurbished (used), functionality: fully functional, control type: CNC control, controller model: MB2000, working width: 3,200 mm, type of crowning: fixed, sheet thickness steel (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,500 mm, Equipment: documentation/manual, emergency stop, RAS 74.30 Multibend 2000 Itjdjxhd H Iopfx Ad Dep Technical Data: Back gauge: CNC 1500 mm Max. sheet thickness: 4 mm Working width: 3200 mm Equipment: pointed rail and bending rail Motorized adjustment of the bending beam, Safety stop (finger guard), emergency stop cable Various tools available as options Gooseneck segments available on request

Condition: used, functionality: fully functional, Year of construction: 2007, Sheet width: 3200 mm Sheet thickness: 3 mm Upper beam opening: 300 mm Control system: System 5000 Motor power: 4.5 kW Machine weight approx.: 4,400 kg Itedpfx Adjxfh S Ne Dep Space requirement approx.: 4300 x 2300 x 1750 mm

Condition: good (used), Year of construction: 2002, sheet width 3220 mm plate thickness 3.0 mm ST thickness at "Niro-steel" 2.0 mm upper clamping bar adjustment 300 mm adjustment speed 100 mm/sec 80.0 mm Bending speed 120 °/sec work height max. 869 mm back stop - adjustable 1.0 - 1.500 mm compressed air 6.0 bar control POS 2000 total power requirement ~ 8.8 kW voltage 400 V weight 4380 kg range L-W-H 4575 x 2450 x 1737 mm New price including accessories approx. 110.000 Euro From a maintenance workshop In good condition (!!) - in checked conditions - machinevideo - ?v=8jPsMSxC6pU Equipment: - Motorized universal folding machine "SERVO POWER BEND" * High-precision mechanics with modern control technology * For single and series production * Robust high-speed machine with high axis speeds * Torsion-free welded construction - SCHRÖDER CNC control model "POS 2000" * With touchscreen control panel * Color display * USB interface * Automatic cutting calculation * Material and tool library * Precise bending simulation * Windows XP operating system - Servo-converter-controlled drives * For bending beam/upper beam & electric backgauge - CNC electric-driven lower beam adjustment - CNC electric-driven backgauge Itsdpfx Aexcp N Rod Dop * Travel speed 300 mm/sec. - With rear sheet support surface, including ball transfer units - 1x freely movable double foot switch - 2x front emergency stop buttons - Operating instructions (PDF) * Optional accessories included: - 1x split set of bending rails - bottom (installed) - 1x extra bending rail 25.0 mm - 1x extra bending rail 10.0 mm - 1x extra bending tool for the top - POINT - 1x extra split set of bending tools for the top - GOAT'S FOOT * Tool height 170 mm

Condition: used, Year of construction: 1981, sheet width 1020 mm plate thickness 1,5 mm Iodpfx Aexbtrtsd Detp daylight opening max. 85 mm weight of the machine ca. 240 kg Smallest bending width factor 10 x sheet thickness s Smallest inner radius factor 1.5-2 x sheet thickness s Lowering capability of the lower and bending beams 20 mm On this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring. The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned. The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)!

Condition: new, Year of construction: 2026, control type: CNC control, controller model: Easybend 2D, working width: 3,100 mm, bending force (max.): 150 t, distance between stands: 2,600 mm, New machine Haco press brake type OPTIFORM 3m x 150T Easybend CNC controller Rear motorized back gauge axis XR Manual table for standard European-type tooling Manual fast clamping system for punches, European System type DSP light barrier Option: 2 swiveling front support arms Ijdjxan Imopfx Ad Dotp Version OPF 30150 + : with XRZ1Z2 backgauge - CNC crowning

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1995, controller model: ATL 595, working width: 3,100 mm, power: 19 kW (25.83 HP), bending force (max.): 200 t, distance between stands: 2,600 mm, Refurbished machine Haco press brake type PPH 3m x 200T Iedpfx Adsxanm Aj Djtp New ATL 595 controller Motorized back gauge X axis European Standard type punches Monoblock die

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, controller model: Easybend 2D, working width: 3,600 mm, back gauge: 800 mm, total length: 3,600 mm, bending force (max.): 135 t, distance between stands: 3,100 mm, Refurbished machine Itedpfexamcvsx Ad Djp Haco press brake type ERMS 3.6m x 135T Motorised back gauge X axis Manual quick-clamping system for punches European System type punches Standard European type dies

Condition: used, Year of construction: 1997, sheet width 3020 mm plate thickness 4.0 mm Opening width / upper beam 350 mm Adjustment folding beam 100 mm adjustment of lower beam 80.0 mm bending angle max. 130 ° work height max. 900 mm Control SIEMENS OP 7 voltage 400 V total power requirement 9.5 kW weight 5400 kg range L-W-H 4300 x 2400 x 1780 mm Furnishing: - SIEMENS - PLC control model OP 7 * Bending process as a controlled, fully automatic, or semi-automatic workflow can be selected * Bending angle adjustment electronically preselectable 0-135 ° - electr. / controlled backgauge X = 1000 mm * with large sheet metal support surface - heavy welded construction - all drives both. via worm gear - Motorized adjustment of the bending beam - large adjustment range of the cheeks - hydraulic upper tool clamping - Insert / bending tools - Operation manual * Special accessories included: - separate split goat foot splint H 170 mm * Machine video: - ?v=C3rwhUDtOKw Itsdpjxacgkofx Ad Dop

Condition: used, Year of construction: 2007, sheet width 3020 mm plate thickness 2.0 mm bending angle max. 135 ° stroke of upper beam 250 mm Adjustment folding beam 25.0 mm work height max. 935 mm control SCHRÖDER NC total power requirement 6.0 kW weight of the machine ca. 3350 kg. dimensions of the machine ca. 4250 x 2300 x 1900 mm - in checked conditions - machinevideo - ?v=kyDHkc9opN4 Features: - Dynamic, powerful motorized folding machine - Used SCHRÖDER NC control unit with LCD display * Manual, setup, and automatic operation * Fast programming of individual parts * Pivoting control panel, right front - NC electro-motorized backgauge with rear sheet support surface Isdpoxacfyjfx Ad Dstp - Manual lower beam adjustment - 1x freely movable double foot switch - 1x bending tool set - 2x emergency stop buttons at the front - Operating instructions (PDF)