Amikon GmbH

Condition: excellent (used), Heraeus Vötsch Type: VCS 7018-5 Climatic Test Chamber with Humidity Control, Water-Cooled Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1775 mm Characteristics for Temperature Tests: Temperature Range: -70°C to +180°C Temperature Range: ± 0.1 to ± 0.5 K Spatial Range: ± 0.5 to ± 2.0 K Temperature Gradient: 1 to 4 K Temperature Rate of Change according to IEC 60068-3-5 Heating: 7.5 K/min Cooling: 7.5 K/min Characteristic values for climatic tests: Temperature range +10 to +95°C Humidity range: 10 to 98% RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature deviation over space: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Humidity fluctuation over time: ± 1 to ± 3% RH F. Dew point range -3 to +94 °C Electrical connection: Nominal voltage: 3/N/PE AC 400V±10% 50Hz Cc8Vpg7Pcy Nominal power: 10 kW Nominal current: 21 A Fuse protection: 32 A slow-blow, provided by the customer Refrigerant: R-404A / R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg For your safety, please note the following information! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VTS³ 7048-10-M Heraeus Vötsch temperature test chamber water-cooled Performance data: With temperature change rate of 10 K/min Test chamber dimensions Height 950 mm Width 800 mm Depth 650 mm External dimensions Height 2025 mm Width 1000 mm Depth 2480 mm Temperature range -70°C to + 180°C Temperature deviation in time ± 0.3 to ± 0.8 Temperature homogeneity in space ± 0.5 to ± 2 Temperature change rate cooling 10 K/min Temperature change rate heating 10 K/min Heat compensation at -20 °C 8000 W Heat compensation at +20 °C 8000 W Test volume: 480 liters Drf3Vt 2x side passage ∅ 125 cm Cabinet is water-cooled Test room lighting: Halogen bulb 24 V, 50 W Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal power: 17 kW Nominal current: 30 A Refrigerant: R-404 A / R-23 Weight: approx. 1250 kg For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Zwick / Roell Type: LTM10 Max test frequency: 100 Hz depending on the amplitude Dynamic test force in tension/compression: 10 kN Drf3Np Static test force in tension/compression: 7 kN Piston stroke: 60 mm Positioning and repeat accuracy: +/- 2 µm Speed range: 1 mm/min - 1 m/s Test chamber height without force transducer: 1170 mm Weight with linear motor: 1065 kg (without control unit) Maintenance: according to maintenance specifications, partly by Zwick/Roell Accessories: screw clamps, software (TestXpert research) Connection 400V 50/60 Hz 32A 3Ph/PE Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, SLM Solutions Type: SLM 500 Build space (L x W x H): 500 x 280 x 365 mm (minus substrate plate height) 3D optics configuration: Quad (4x 700 W) Build rate: up to 345 cm³/h Variable layer thickness: 20 µm - 90 µm, Min. structure size 150 µm Focus diameter 80 µm - 115 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 16 l/min (argon) Average protective gas consumption in the flooding process: 250 l/min (argon) Powder supply with 90 kg Electrical connection / power consumption: 400 volts 3NPE, 63 A, 50/60 Hz, 8-5.5 kW Drf3M2 Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 6080 mm x 2530 mm x 2620 mm Machine weight (without / including powder): kg, kg with powder Was operated with aluminum AlSi10Mg! Laser hours: 1689 h Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch TU 60/60 Heating and drying cabinet Nominal temperature: 200°C Technical data: Interior (usable space) 0.216 m3 Internal dimensions: Width 600 mm Height 600 mm Depth 600 mm External dimensions: Total width 796 mm Height 1725 mm Depth 850 mm Loading / load capacity Total roller conveyor 55 kg Loading height above installation floor 820 mm Weight (net) kg 275 Nominal voltage: 400V3(N)PE AC 50/60Hz Nominal current: 11 A Connection value: 7 KVA Nominal power: 6 kW Drfz0L Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone answer.

Condition: excellent (used), Perkin Elmer Type: Optima 7300 V Spectrometer Perkin Elmer ICP-OES Optima 7300V with cooler and S10 autosampler The optical system of the Optima 7300 V enables simultaneous measurement and coverage of the entire wavelength range (UV and visible). More than 73 elements can be measured in seconds to achieve exceptional sample throughput, and all raw spectral data is stored with full reprocessing capabilities. This allows sample results to be evaluated under different processing conditions, B3U7Rqpzmq reducing the need for re-sampling and saving time and money. The Optima 7300 V was specifically developed for the special challenges of oil sample analysis and the analysis of special metals in laboratories and offers the following features: Classic vertical burner configuration with radial view Problem-free sample feed system Proven high-performance optical system Robust solid-state generator Two models available: oil version for oil analysis and HF version for geochemical and high-solid analysis Technical data: Ultraviolet wavelength range from 165 to 403 nm and for the VIS detector in the visible spectrum 404 to 782 nm Measurement of the spectral background possible during the analyte line Solid state 40 MHz signal generator Dimensions 150 x 76 x 89 cm (W x H x D) Power supply 200-240 V, 20 A line, single-phase, 50/60 Hz Maximum power 2800 VA Connection current 15 A Circulation cooler PolyScience Recirculator N0772025 Mains connection 200-240 V 50Hz Weight: 200 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Leco Type: Leco CS-200 / Model: 605-700 Carbon / sulfur analyzer CS analysis system for inorganic solids with a very wide range of applications - robust universal design for use "on site" as well as in high-tech laboratories - C/S measurements from 1-2 ppm to 100% (depending on initial weight) - Control via DSP controller and/or Leco Windows software - fully automatic oven cleaning with dust trap cleaning (Leco exclusive!) - High frequency combustion at 2300 °C - Analysis time of approx. 40 seconds - (Option) Autoloader for 20 positions with quick loading device and other automation options (Leco CS-200, operating instructions) Condition: used Scope of delivery: (See picture) B3Pdjbudoa (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Weiss B23Ojymkvw Type: WK 27'/50-150 Water-cooled climate test chamber Program control with Simpac Simpac is a self-monitoring, digital 32-bit measurement and control system and was specially designed for use in test cabinets. With its computing power, Simpac meets the requirements of process engineering and simplifies the input function with a specially developed control unit. Technical data: Test cabinet designation: WK 27'/50-150 Working range temperature Temperature range -50°C to + 150°C, discontinuous Temperature constancy ≤ ± 0.3 to 1.0 K (time-wise) Cooling rate approx. 1.0 K/min. on average from +80°C to -40°C with test object mass and without thermal load, measured in the outlet of the recirculation system Heating speed approx. 1.0 K/min. on average from -40°C to +80°C with test object mass and without thermal load, measured in the outlet of the recirculation system Test object mass 1000 kg with steel (80%) and plastic (20%) Working range climate Temperature range +10 °C to + 90°C Temperature constancy ≤ ± 0.1 to 0.5 K (time-wise) Humidity range 15 ... 95 % r.h., without thermal load Humidity constancy ≤ ±5 % r.h. (time-wise) Dew point temperature range +4 °C to +89 °C without thermal load Humidifier capacity max. 56.0 kg/h Test chamber and unit dimensions Test room dimensions Height approx. 3000 mm Width approx. 3000 mm Depth approx. 3000 mm Chamber external dimensions Height approx. 3500 mm Width approx. 3400 mm Depth approx. 4000 mm Install dimensions, as chamber is delivered compactly Height approx. 4300 mm Width approx. 3600 mm Depth approx. 4800 mm Machine unit Height approx. 1900 mm Width approx. 2000 mm Depth approx. 1200 mm Chamber door, two-winged Height approx. 3000 mm Width approx. 3000 mm Door design attached door with threshold Door window, in each door leaf Height approx. 600 mm width approx. 450 mm Window in the left side wall height approx. 800 mm width approx. 800 mm 4 ducts, ∅ 125 mm Lighting by 4 halogen spotlights, switch on the outside of the door Floor load capacity 30,000 N/m² (surface load) 4,000 N/wheel (4 cm²/wheel, wheel load) Mains connection 400 V; 3 PH + N + PE; 50 Hz Connection power approx. 140.8 kW Connection current approx. 225.0 A Refrigerants R 407F and R 23 Weight: 7000 kg For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Trumpf Type: TruPulse 44 Trumpf laser device with laser light cable and KLH cooler Laser device TruPulse 44 Electrical power at nominal laser power on the workpiece 2.0 kW Power 2.0 kVA Current at 230 V 9.0 A Consumption data Maximum power consumption (e.g. service case) Electrical power at nominal laser power on the workpiece 2.5 kW Power 2.5 kVA Current at 230 V 11.0 A Network design! Electrical connection values Mains 220 V (-10%) ... 240 V (+10%) 50 Hz (-3 Hz) ... 60 Hz (+3 Hz) at nominal power (total power factor) 0.88 Insulation resistance 400 kOhm Pre-fuse 16 A Laser device dimensions Width 485 mm Depth 800 mm Height 700 Laser device weight 1.5 kN (150 kg) distributed over 4 castors Cooler: KLH Kältetechnik UC3.K2W. MT-00-TLS Refrigerant R134 a / GWP 1430 Tank 1.80 kg Power supply 3 x 400 V Frequency 50 Hz Drfd7X Rated current 4.5 A Connected load 1.8 kW Dimensions Length 650 mm Depth 650 mm Height 1100 mm Weight 190 kg Weight: 340 kg Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Trumpf Type: TruMark 3000 Laser marking station Wavelength: 1064 nm Dre3Y9 Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2023, Condition: like new (used), Thermo Fisher Type: ARL easySpark metal analyzer Drezzb Analysis table spectrometer with PC, monitor and software Thermo Scientific OXSAS 2.7 software OXSAS is the most modern software for optical emission spectrometers. Current analyses are displayed in tabs. Immediate editing of data sets using fill-down and increment-down tools OXSAS is a multi-processing application with amazing capabilities and potential. The comprehensive functionality of OXSAS enables it to meet all your requirements. Technical machine description: Condition: fully functional In mint condition Year of manufacture: 02/2023 Technical description of the system: The ARL easySpark metal analyzer is designed to meet the challenges and requirements of small to medium-sized plants and laboratories in the metal industry that require high-quality but cost-effective OES analysis for the production of parts for the automotive, aerospace, consumer goods and other industries. The device impresses with its particularly high resolution thanks to a unique optical system based on multi-grating/CCD (charge-coupled device). Additional benefits of the Thermo Scientific ARL easySpark analyzer include: The ability to accurately analyze all elements, from trace levels to percent, in all solid metal samples A breakthrough spark excitation and optical design to ensure best-in-class performance Intuitive, user-friendly Thermo Scientific OXSAS analysis software for a quick learning curve and easy routine operation A robust and reliable design that requires minimal maintenance Compliance with safety and quality guidelines A simple design that is suitable for both novice production users and expert lab staff The instrument is ideal for other areas such as metal recycling, academic and non-academic laboratories and primary metal producers where a cost-effective solution for analyzing metal products and materials for quality assurance and process control or a secondary instrument is required. Power connection: 110-230 VAC, 50Hz or 60Hz Max. power: 600 VA Dimensions: Approx. L x H x D 0.80m x 0.45m x 0.70m Weight: Approx. 80 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, GRIESER Type: VPL 3.0 Total volume of mixing chamber 3.0 liters Usable volume 0.3 to 2.0 liters Pressure in mixing chamber 0 to 1.2 abs. Pressure in stainless steel double jacket: N/A Critical speed 1800 rpm Speed range under load Blade mixing tool 38-282 rpm Scraper 9-90 rpm Rated voltage: 3/PE/50Hz, 400V L/PE/N/50Hz, 230V Control voltage: 24V DC Power: 1.3KW Rated current: 5.0A Main switch: 32A Fuse: 16A Weight: 250 kg B0F3Cnay2Y Sold ex location! Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Functionality: fully functional, emco Type: Concept Mill 55 Desktop CNC milling machine Equipment: Compact desktop CNC milling machine High-quality industrial components Robotics interface for integration in FMS/CIM systems High-resolution axis motors Engraving spindle device B0Fylgko0Q Safety technology CE compliant Continuously adjustable main drive NC dividing apparatus as optional fourth axis Made in the Heart of Europe Highlights: Stable, industrial-grade gray cast iron construction Main spindle bearing grease-lubricated for life Automatic reference point approach Fully covered work area Continuously adjustable main drive and feed drives 3D CNC path control Spindle clockwise/anticlockwise rotation Backlash-free bearing of the axis spindle in precise, life-lubricated angular contact ball bearings Technical data: Working area: Travel path in X/Y/Z 190/140/260 mm Distance spindle nose table 77 - 337 mm Number of axes (basic version) 3 (4th axis optional) Rapid traverse speed X/Y/Z 2 m/min Working feed X/Y/Z 0-2 m/min Max. feed force in X/Y/Z 800/800/1000 N Clamping surface 420 x 125 mm Max. table load 10 kg Milling spindle: Number of tools 8 Max. speed 3500 rpm Max. drive power 0.75 kW Max. torque 3.7 Nm Dimensions: Dimensions (LxWxH) 960 x 1000 x 980 mm Data for operation: Voltage: 110V ~ 1/N/PE 50/60 Hz Im=4.4 A Imax=6.6A 230V ~ 1/N/PE 50/60 Hz Im=2.8 A Imax=4.2 A ik

Condition: excellent (used), Weiss Type: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss climate chamber water-cooled (test room explosion-proof) INERTIZATION WITH NITROGEN / EXPLOSION-PROOF TEST ROOM Technical data: Test chamber designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock Height 1995 mm, width 1090 mm, depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, width 1000 mm, depth 1660 mm Test room capacity: approx. 600 liters Cold / heat operation -70 to 180°C Climate operation 10 – 95°C Humidity 10...98% r. H. Temperature change per time Cooling approx. 2.5 K/min Heating approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A On-site fuse: 32 A slow-blow Permissible test item weight Total load of the grate supports 80 kg Test room floor 80 kg, grate insert 40 kg Drek3Z Weight: 800 kg Refrigerant: R 404A/R 23 (The air conditioning system's evaporator has been replaced) For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, SNOL Type: SNOL 75/300 Drying cabinet stainless steel chamber with fan and programmer Description: The chamber is designed for drying various materials and for carrying out analytical work at temperatures up to 300 °C. Technical properties Temp. 300 °C Volume, 75 liters Dimensions of the working chamber, width 800 mm, length 800 mm, height 260 mm Overall dimensions, width 1230 mm, length 1200 mm, height 850 mm Bxbc380Vrs Power, 7 kW Voltage, 400 V Weight, 210 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Espec Type: EGNX28-6CWL Espec climate test chamber water-cooled Climate test chamber N series Temperature range -70 to +180°C Temperature change rate Heating 10 °K/min Cooling 5.5 °K/min Humidity range 10 to 95% RH according to diagram Internal dimensions W x H x D in mm 1000 x 1000 x 800 External dimensions W x H x D in mm 1205 x 1930 x 1960 Usable space volume 800 liters Cooling capacity 3.6 kW at -50 °C Heating system 10 kW Refrigerant R-404A Refrigerant R- 508A Power supply: AC 400 V 3-phase 50/60Hz 38A Drdiyt Weight: approx. 695 kg For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Climats Type: EXCAL 1413-HA Air-cooled climate control cabinet EXCAL is equipped with a 15-inch capacitive multi-touch panel PC, SSD memory, Windows 7 and 2 USB ports. This means it is state-of-the-art. Technical data: Test room dimensions: width 550 mm x depth 500 mm x height 500 mm Housing dimensions: width 820 mm x depth 1375 mm x height 1730 mm Window 350 x 380 Volume: 138 liters Flow-through installed in basic equipment R1: 80 mm ∅ L1: 80 mm ∅ Data for temperature tests: Temperature range: -40°C to +180°C Temperature deviation over time ± 0.1 to ± 0.3 K Temperature homogeneity in space ± 0.5 to ± 1.8 K Temperature change rate Heating 15 K/min Cooling 10 K/min Data for climate tests: Temperature range + 10 to +90 °C Humidity range 10 to 98 %r.h. Data for operation: 3/N/Ph+T 400V±10% 50 Hz Bwgayzwxo8 Rated power 9.8 KVA Refrigerant R-404A / R-23 Weight: 430 kg For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Zwick / Roell Type: BS2-FR250SW.A4K.003 Zwick / Roell material testing machine 250 KN Product information: Data value: Load frame Paint finish RAL 7021 and RAL 7038 Ambient temperature +10 ... +35 °C Air humidity (non-condensing) 20 ... 90 % Drive Motor AC servo motor with concentrated windings Hiperface® motor feedback system Control, setpoint specification Digital (real-time Ethernet, EtherCAT) Controller / cycle time adaptive / 1000 Hz Positioning repeatability on the traverse ± 2 μm Measurement and control electronics Number of available slots for measurement and control modules 2 synchronized module bus slots (expandable to 5) 1 synchronized PCIe slot Force measurement class 0.5 / 1 depending on Force transducer, in accordance with DIN EN ISO 7500-1, ASTM E4, Calculated resolution (e.g. force transducer in tension / compression direction) 24 bit Measurement value sampling rate, internal 400 kHz Measurement value transmission rate to PC 500 Hz (optional 2000 Hz) Zero point correction automatic at the start of measurement Measurement signal runtime correction for all channels yes Drb9Sf Interface to PC Ethernet Eco mode yes, automatic shutdown of power unit (time adjustable) CE conformity yes, according to Machinery Directive 2006/42/EC Connection values Mains frequency 50/60 Hz Electrical connection 400V +/-10% (3Ph, N, PE) Z250 SW Load frame Test force FN in tension / compression direction 250 Height 2340 ... 2360 mm Width 1600 mm Width with electronic unit 1820 mm Depth 1040 mm P 1: top, fixed traverse top 1675 mm P 2: bottom, fixed traverse top 1655 mm P 3: bottom, fixed traverse bottom 1595 mm P 4: top & bottom, with additional traverse 1440 mm Total weight with electronics 2100 kg Noise level at maximum test speed 70 dB (A) Drive Traverse speed up to 0.00005 110% of the test force (vmin ... vNenn) ... 600 mm/min Increased traverse return speed (with reduced force) 1000 mm/min Displacement resolution of the drive 0.19227 nm Connection values Power consumption 6 kVA Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Type: SWT 200/400 Weiss spray and splash water test cabinet The penetration of water into the housing is tested. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Bqynn8Lmw3 According to DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation device means that water consumption can be reduced to a minimum. Features Glass door with wiper Pneumatic drive of the swivel tube Adjustable swivel angle Replaceable swivel tubes Nozzle holder swivels and can be replaced Adjustable water volume flow and measurement Control of the test duration Data for mechanical stress Max. load with test material (evenly distributed over the surface) Permissible test material weight for test material carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection class tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Data for operation Voltage: 3/N/PE AC 400V ±10% 50hz Rated power 1.5 KW Rated current 6.0 A Weight: 375 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2019, Condition: as good as new (ex-display), Functionality: fully functional, KRÜSS Type: FP8400 Drax3P Remarks: (Year of manufacture 2019) The device has never been put into operation, is in mint condition and is in its original packaging. Description: The flame photometers from A.KRÜSS are used to determine the concentration of alkali and alkaline earth elements in aqueous solutions. The devices are a simple and particularly cost-effective alternative to analysis techniques such as ICP or AAS. Flame photometers are particularly suitable for the quantitative determination of alkali metals such as sodium (Na), potassium (K) and lithium (Li) and alkaline earth metals such as calcium (Ca). The measurement for these elements is carried out simultaneously in one step. Through consistent modernization of the flame photometers and a special focus on safety-related concepts, completely new fields of application are opening up for many cost-sensitive customer groups - from automated incoming goods inspection to the qualification of FFP masks according to DIN 149. Low operating costs are one of AES's main strengths, and the technology of the FP8000 series also scores with high determination accuracy. Measuring food samples Quality assessment of high-purity glasses and vials for pharmaceutical packaging Concrete classification Analysis of infusion solutions. Flame photometer laboratory version with manual sample feed, 4 measuring channels, measuring methods freely configurable, additional channel for flame monitoring. Measuring ranges for undiluted samples: 0.01 mg/l to 4500 mg/l sodium 0.01 mg/l to 4500 mg/l potassium 0.01 mg/l to 4500 mg/l lithium 0.50 mg/l to 4500 mg/l calcium Resolution: 0.001 mg/l for all elements Accuracy: +/-1% with appropriate quality of the standards Precision:

Year of construction: 2023, Condition: used, Mettler Toledo Type: DSC 3 Mettler Toledo Thermal Analysis System DSC 3 in top condition! (License not available!) Dynamic differential scanning calorimetry (DSC) is the most commonly used thermal analysis technique. It measures enthalpy changes in samples that occur due to changes in their physical and chemical properties as a function of temperature or time. Features and advantages of the METTLER TOLEDO DSC 3: Robust MultiSTARe DSC sensor with 56 thermocouples – detects the smallest and largest thermal effects Proven, indestructible sample changer in continuous operation – works efficiently and reliably around the clock Start the experiment with the OneClick function – quick and easy routine operation Simple FlexCal calibration – saves time and leads to precise and accurate measurements Value retention through modular concept – adapts to your current and future requirements Extended temperature range – from –150 to 700 °C in one measurement Intelligent ergonomic design – simplifies device operation Comprehensive range of services – professional support in your daily work Specifications - Thermal analysis system DSC 3 Technology Dynamic differential calorimetry (DSC) Applications: Glass transition Heat capacity (cp) Crystallization Kinetics Oxidation induction time (OIT) Temperature modulated DSC measurements Sampling rate: Max. 50 data points/s Sensor types FRS 5+ HSS 8+ Temperature range -150 °C – 700 °C Options: Microscopy Photocalorimetry Signal time constant 1.8 s (FRS) 3.1 s (HSS) Sensor output heat flow Cooling rate (min) 0.02 K – 50 K Temperature range (depending on configuration) -150 °C - 700 °C DSC 3 specifications: Temperature information Temperature range Air cooling RT to 500 °C (200 W) Cryostat cooling -50 to 450 °C IntraCooler -100 to 450 °C Liquid nitrogen cooling -150 to 500 °C Temperature accuracy ± 0.2 K Temperature precision ± 0.02 K Oven temperature resolution ± 0.00006 K Heating rate RT to 700 °C 0.02 to 300 K/min Cooling rate 0.02 to 50 K/min Cooling time: Air cooling 8 min (500 to 100 °C) 9 min (700 to 100 °C) Cryostat cooling 5 min (100 to 0 °C) IntraCooler 5 min (100 to 0 °C) Liquid nitrogen 15 min (100 to –100 °C Calorimetric information Sensor type FRS 5+ HSS 8+ Drafn2 Sensor material Ceramic Number of thermocouples 56 120 Signal time constant 1.8 s 3.1 s Indium peak (height to width) 17 6.9 TAWN Resolution 0.12 0.20 Sensitivity 11.9 56.0 Measuring range at 100 °C ± 350 mW ± 160 mW at 700 °C ± 200 mW ± 140 mW Resolution 0.04 μW 0.02 μW Digital resolution 16.8 million points Sampling: Sampling rate maximum 50 values per second Special modes ADSC IsoStep TOPEM Automation Photocalorimetry huber immersion cooler TC45 General & temperature control Temperature range -45...100 °C Controller ON-OFF controller Safety class I / NFL Dimensions (W x D x H) 190 x 295 x 360 mm Weight, net 16 kg Heating / cooling capacity Cooling capacity 0°C 0.24 kW -20°C 0.18 kW -30°C 0.1 kW -40°C 0.05 kW Air-cooled refrigeration machine, natural refrigerant Refrigerant 1st stage R-290 (A3, H220) Refrigerant quantity 1st stage 0.041 kg Permissible ambient temperature 5...40 °C Mains connection 208-240V 1~/2~ 50/60Hz Current consumption max. 1.4 A

Condition: used, SNOL Type: SNOL 120/350 SNOL heat and drying cabinet up to 350°C Description: Dq937V SNOL high-temperature drying cabinet 120/350 For industrial applications. Max. 350°C Internal volume 120 liters Internal dimensions 555x350x555 mm 400 volts, 50 Hz, 6 kW Vertical air circulation through built-in fan Overtemperature protection Chamber made of stainless steel Door hinge on the right, including two shelves Low power consumption Fast heating and cooling times Powder-coated housing RAL 7035 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Thermo Finnigan Type: Thermo Finnigan Trace MS 2160 / Thermo Finnigan DSQ II Thermo Finnigan mass spectrometer Thermo Finnigan GC/MS system Trace MS 2160 with Thermo Finnigan DSQ II Dq93F7 Description: Mass spectrometer Mass range up to m/z 1050 Ionization methods: EI, (CI) Quadrupole separation system Automatic sample changer Data system: Xcalibur with NIST spectra library Split/splitless injector and PTV injector Direct sample inlet via push rod Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Spectro Bmd70P8H3Q Type: Ciros Vision CCD Analyzer Ciros Vision CCD Total height: 162cm, total width: 150cm, total depth: 90cm Adjustable extractor Total air output 500m³/h Condition: used Scope of delivery: (Autosampler as shown) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Heraeus Type: HA 2472 BS Cleanroom workbench for installation and operation in laboratories Interior dimensions: 1,800 mm x 580 mm x 830 mm (length x depth x height) Lighting, gas connection Dq928D Condition: used Scope of delivery. (See pictures) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.