Rudolf Wagner Werkzeugmaschinen

Condition: good (used), Year of construction: 2009, functionality: fully functional, For sale is a used, fully functional double mitre band saw manufactured by Bauer Maschinenbau GmbH. This machine stands out for its robust construction, precise cutting results, and high reliability in daily operations. The band saw is currently under power and can be demonstrated by arrangement. Technical Specifications: Cutting capacity: - 90° round: 280 mm Hodpfex Uxruex Ahusng - 90° flat: 320 × 230 mm - 45° flat: 220 × 230 mm - 30° flat: 130 × 160 mm Cutting angle: - 45° – 0° – 60° Saw blade: - 3000 × 27 × 0.9 mm Band speed: - 30 – 60 m/min (steplessly adjustable) Dimensions (L × W × H): - 1700 × 700 × 1400 mm Condition: - Used - Technically flawless - Immediately ready for operation If interested, we are always available for further information or to arrange an inspection.

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, The USED MACHINE KASTO 260/400 U is a single miter band saw capable of cutting round material up to a diameter of 260 mm and square material up to 260 x 400 mm. Material is fed and clamped manually. The saw frame is raised hydraulically, while the cutting feed is performed automatically by a hydraulically controlled downfeed cylinder. Infinitely variable cutting speed via variator gearbox. Technical Data: • Cutting range: 90° round: 260 mm; rectangular: 260 x 400 mm 45° round: 260 mm; rectangular: 260 x 260 mm • Motor power Power supply approx. 3.2 kW / 400 V / 50 Hz Saw motor approx. 2.2 kW / 400 V / 50 Hz • Blade speed 18 to 110 m/min. (stepless) • Working height 835 mm • Minimum remnant piece length approx. 20 mm (90°) • Saw blade 4310 x 27 x 0.9 mm • Dimensions (in operation) 2410 x 1805 x 913 mm • Weight 920 kg Standard Equipment • Hydraulic control of the cast iron saw frame • Saw blade drive via variator • Stepless saw blade speed adjustment from 18 to 110 m/min • Saw frame height limit • Driven chip removal brush Hnodex Sx D Eepfx Ahueg • Electric blade tension monitoring with blade breakage detection • Carbide saw blade guides and guide rollers • Cutting pressure regulation (solid material – tube) • Sturdy base with coolant tray • Bi-metal saw blade M 42

Condition: new, Motor power: 1.5 kW (400V-3PH) / 1.5 kW (Inverter) Cutting capacity 0°: Ø 255 mm ■ 200 mm █ H200 x 340 mm Cutting capacity 45°: Ø 220 mm ■ 200 mm █ H200 x 220 mm Cutting capacity 60°: Ø 135 mm ■ 135 mm █ 135 x 135 mm Cutting capacity -45°: Ø 220 mm ■ 200 mm █ H200 x 135 mm Blade speed: 35/70 m/min / 20~80 m/min (Inverter) Blade dimensions: 2750 x 27 x 0.9 mm Weight: 390 kg Dimensions: 1750 x 770 x 1600 mm Hedpfx Asx Rkpkehusng

Condition: good (used), – 2 speeds Hedsx Izkmspfx Ahujng – Double mitre – Hydraulically adjustable cutting pressure – Cooling system – Saw blade 2730 × 27 × 0.9 mm – Emergency stop – 400V

Condition: used, Year of construction: 2005, Technical Data: Cutting Capacity: 90° round: 260 mm 90° flat: 300 x 260 mm 90° square: 260 x 260 mm +45° round: 200 mm +45° flat: 200 x 240 mm +45° square: 200 x 200 mm +60° round: 165 mm +60° flat: 160 x 120 mm +60° square: 150 x 150 mm -45° round: 200 mm -45° flat: 200 x 240 mm -45° square: 200 x 200 mm Shortest remnant length: 35 mm Total connected load: 2.0 kW Saw motor, frequency controlled output: 1.5 kW Infinitely variable cutting speed (frequency controlled): 20 – 110 m/min Saw blade dimensions: 2910 x 27 x 0.9 mm Dimensions and Weight: Length, approx.: 1020 mm Width, approx.: 1830 mm Hsdpox Irx Iofx Ahujng Height (upper section lowered), approx.: 1460 mm Height (upper section raised): 1900 mm Material support height: 950 mm Total weight, approx.: 510 kg Equipment: - Carbide saw blade guides, replaceable - Mechanical material clamping - Hydraulic feed for cutting - Mechanical saw blade tensioning - Saw blade cleaning by a driven, easily replaceable wire brush - Coolant system: feed via 1 coolant nozzle and 1 coolant hose, tank capacity approx. 45 l, pump performance 16 l/min

Condition: used, Metal band saw Hans Schreiner MBS270FH, very good condition, 1.5 kW, 260 mm cutting length, 140 mm cutting length, 227 kg Hnedpfxjx H Ui Tj Ahujg Prices subject to change without notice. Errors, misprints, and typographical mistakes excepted.

Condition: used, Year of construction: 2015, cutting diameter 225 mm saw band length 2450 mm cutting width 240 mm dimensions of saw-band 2450 x 27 x 0,9 mm capacity 90 degrees: flat 240 x 160 mm capacity 90 degrees: square 200 mm capacity 45 degrees: round 160 mm Hnsdpfex Hp Dxox Ahujg capacity 45 degrees: flat 155 x 115 mm capacity 45 degrees: square 140 mm capacity 60 degrees: round 90 mm capacity 60 degrees: flat 90 x 90 mm capacity 60 degrees: square 90 mm weight of the machine ca. 240 kg Features: - Manual band saw machine - One-sided miter - Automatic lowering of the saw bow - Cuts from 0° to 60° left - Coolant device

Condition: new, cutting diameter 250 mm saw band length 2950 mm Hnedpfx Ahoxz Hhzsuog cutting width 280 mm dimensions of saw-band 2950 x 27 x 0,9 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,4 t Powerful miter band saw for cuts from 0 ° to 60 ° left -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Description: -Manual cutting cycle -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Hydraulic unit for the saw band tension and monitoring with display on Manometer (belt tension = 900 kg) -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -Schipping brush for cleaning the saw band

Condition: used, Year of construction: 2020, Technical Specifications – Bomar Ergonomic 320.258 DGH General Information Machine Type: Semi-automatic horizontal band saw Cutting Direction: Double mitre (left –45° to right +60°) Application: For cutting steel, stainless steel, aluminium, profiles, and solid materials Cutting Capacity Round material at 0°: Ø 258 mm Rectangular material at 0°: 320 × 100 mm Minimum cutting diameter: Ø 5 mm Shortest remaining workpiece: 20 mm Movement & Operation Cutting speed: 20 – 120 m/min (infinitely variable) Swivel range: –45° to +60° Blade dimensions: 2910 × 25 (27) × 0.9 mm Hydraulic lifting and lowering of the saw bow Hydraulic vice One-piece cast iron saw bow for high stability and low vibration Motor & Power Motor power: 1.5 kW Power supply: 3 × 400 V, 50 Hz Dimensions Hodpjxzi Nzsfx Ahuong Table height: 760 mm Machine dimensions (L × W × H): approx. 1700 × 1480 × 2000 mm Machine weight: approx. 390 kg Standard Features Heavy-duty cast iron saw frame Carbide blade guides for precise cuts Hydraulic downfeed control Manual rotation of the saw frame with angle locking Integrated coolant system Chip brush for blade cleaning Adjustable material stop Smooth and low-vibration cutting performance

Condition: like new (used), Year of construction: 2024, Bandsaw Machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Part No.: 3680013 Year of manufacture: 2024 – demonstration machine Hsdoxxy E Ujpfx Ahusng Machine No.: 23002271743 Warranty: 6 months, single-shift by manufacturer Metallkraft Cutting capacity (round): 230 mm Cutting speed: 35/70 m/min Standard equipment: - Horizontal vice - Length stop (600 mm) - Electromechanical saw blade tension monitoring - Chip removal brush - Coolant system - Operating manual With the following options: - Minimum quantity lubrication - Factory-installed minimum quantity lubrication system

Condition: good (used), Good working condition. Hnjdpfx Aoxvnh Sohuog

Condition: good (used), Year of construction: 2012, Band saw is in good working condition. Hedpsxvnh Eofx Ahuong

Condition: ready for operation (used), Bomar automatic band saw in very good condition Capacity: Round 250 mm Square 250x250 mm Rectangle 290x250 mm Cutting speed: 40-80 m/min Dimensions: 1750x1250x1470 mm Hnedpfx Asxur Exshujg Weight: 640 kg Includes 6 spare band saw blades and a user manual Program-controlled cutting of pipe, rod, square, solid, and angle bars

Condition: good (used), Year of construction: 2021, machine/vehicle number: 2021 102 14, Offer 25300 Hnodpfsxup Ttox Ahuog Technical specifications: - Manual band saw - Saw band dimensions: 2750 x 27.0 x 0.9 mm - Infinitely variable cutting speeds: N 15 / 90 m/min - Max. clamping capacity: 355 mm - Mitre adjustable left and right up to 30° - Cutting range: - 90°: - round: 255 mm - square: 190 mm - flat: 310 x 190 mm - 45° left & right: round 215 mm - Drive: 400 V / 1.5 kW - Coolant system - Weight: approx. 350 kg - Space requirement: approx. W 700 x H 1600 x D 1700 mm

Condition: new, Year of construction: 2025, S275 Metal Cutting Machine Motor Type - 3-phase induction motor Electrical connection - 400V 50/60Hz Power supply: 400V (three-phase) Protection - IP54 Power - 1.5 HP 1.1 kW Rated current - 400V - 3.6 Amp Speed ​​(RPM) - 50Hz - 2840/1420 Gearbox Transmission ratio - 50Hz - 1:30 Band saw Saw blade dimensions - 2480x27x0.9x6-10mm Blade guide wheel diameter - 293mm Saw blade speed - 50Hz - 45/90mm (m/min) Cooling System Pump Type – 230V 100W Pump Rated Current – ​​0.3 (Amp) Speed ​​– 50Hz-2840 (rpm) Tank Capacity – 10 liters Mechanical Data Dimensions with base – 1560x990x1665 (mm) Dimensions without base – 1320x510x755 (mm) Shipping Dimensions – 1380x570x890 (mm) Weight – Net – 185 (kg) | Gross – 200 (kg) Noise Level – 70 (dB) Fuse – max. 16 (Amps) Hnodpfxjxdbzbe Ahueg Ambient Temperature – 5-35 (°C) Ambient Humidity – 25-80% General: Cutting Angle Adjustment: Via Swivel Arm Saw Blade Guides: Ball Bearing Guide Rollers Saw Arm Lift: Manual Feed: Continuously Adjustable Saw Blade Tension: Manually via Handwheel Band Guides with Bearings and Carbide Tiles Height from Floor to Vice: 910 mm

Condition: used, Year of construction: 1970, cutting diameter 250 mm saw band length 3660 mm cutting width 1,3 mm clamping range Länge 450 mm clamping range Höhe 250 mm cutting speed 20 - 70 m/min cutting capacity stufenlos mitter cutting - all-position 45 ° Hnedpexc Nwuofx Ahusg voltage 380 V frequency 50 Hz power capacity 0,55 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,5 x 1,0 x 1,6 m coolant device

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Manual high-performance metal bandsaw with selectable manual or hydraulic saw frame lowering. In autonomous mode, the lowering speed is continuously adjustable via the “Push&Pull” controller. By pulling the controller, the frame maintains the previously selected speed, removing the need to reset it for the next cut. Standard Features: - Saw frame made of a robust cast construction - Heavy-duty round table with cutting channel for mitre cuts from 0°–60° to the right and 0°–45° to the left - Movable vise with adjustable guide rails and quick-release lever for repeat cuts - Oil-bath reduction gearbox with bronze gear and hardened, ground steel worm - Electric coolant pump for band lubrication and cooling - Mechanical bandsaw blade tensioning with electrical blade tension monitoring - Precise blade guidance via adjustable, ground carbide plates and ball bearings - "Push&Pull" controller for adjusting the lowering speed - Rotating swarf removal brush Hsdpfoxcnqajx Ahuong - Precision angle scale for angles from 60° right to 45° left - Control panel with ready-to-operate indicator, main/speed selector switch, and switch for manual or autonomous lowering mode - Emergency stop button at knee height for optimal accessibility - Microswitch in the handle for starting motor and pump (dead-man function in manual mode) - Safety switch on the saw frame guard and blade tensioning carriage - Limit switch for automatic motor shutoff after cutting - Length stop for repeat cuts - Material support on the infeed side - Bi-metal saw blade - Tools and user manual Technical Data: - Pole-changeable 400 V three-phase motor, 1.1/1.5 kW - 2 cutting speeds (33/66 m/min) - Vise clamping width: 305 mm - Working height: 940 mm - Saw blade dimensions: 2750x27x0.9 mm - Weight: 380 kg Cutting capacity in mm: 90° 255 250x250 300x200 45° R 190 180x180 190x170 60° R 110 110x110 150x110 45° L 160 140x140 170x120

Condition: used, Year of construction: 2013, cutting diameter 250 mm capacity 90 degrees: flat 250 x 450 mm Hnjdexab Efepfx Ahusg capacity 45 degrees: round 190 mm capacity 45 degrees: square 250 x 190 mm table height ca. 650 mm saw band length 3300 mm dimensions of saw-band 3300 x 27 x 0,9 mm cutting speed 21 - 62 m/min total power requirement 1.5 kW weight of the machine ca. 320 kg dimensions of the machine ca. 1739 x 571 x 1130 mm very rarely used (!!) Furnishing: - electro-hydraulic horizontal band saw - precise saw blade guidance - continuously adjustable belt speed - Continuously adjustable feed from the saw frame - heavy cast construction - manual quick material clamping - Setting options for miter cuts - Replacement saw blades - Coolant device * Machine link: ?machineno=1008-9173350

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device Hnjdpfx Ahoxabpwoujg

Condition: new, cutting diameter 220 mm Hsdpfx Aexabbgohujng capacity 90 degrees: square 210 x 210 mm capacity 90 degrees: flat 230 x 185 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 150 x 150 mm capacity 45 degrees: flat 150 x 210 mm capacity 60 degrees: round 90,0 mm capacity 60 degrees: square 90 x 90 mm capacity 60 degrees: flat 90 x 100 mm dimensions of saw-band 2455 x 27 x 0,9 mm cutting speed 35 + 70 m/min work height max. ca. 900 mm total power requirement 1,2 kW weight 240 kg range L-W-H 870 x 1550 x 1740 mm Equipment: - compact / robust manual band saw (HOBBY / INDUSTRY) * for sawing solid material and profiles - miter cuts up to 60° left possible - 2x selectable cutting speeds (37 + 74 m/min.) - continuously adjustable saw frame feed - automatic shutdown at the end of the cut - manual quick-release vice, including quick-release lever - machine base - coolant system - operating instructions BERG SCHMID Auto-Cut system = 3-stage system 1. automatic lowering & automatic saw cut 2. manual operation - lowering + saw cut 3. high-speed lowering of the saw frame - without saw cut

Condition: new, cutting diameter 225 mm saw band length 2480 mm table height 910 mm capacity 90 degrees: flat 245 x 150 mm capacity 90 degrees: square 200 x 200 mm capacity 45 degrees: round 160 mm capacity 45 degrees: square 160 x 160 mm Hnedpfx Ahsxaa Tbjusg capacity 60 degrees: round 100 mm capacity 60 degrees: square 100 x 100 mm turning speed range: 45/90 m/min dimensions of saw-band 2480x27x0,9 mm total power requirement 1,5 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1430x720x1700 mm Scope of delivery : - saw band - workpiece stop - underframe - Manometer for belt tension - Vice with quick lock - coolant device - Hydraulic lowering cylinder - Motor protection switch - Automatic limit switch-off

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 x 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 x 180 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 x 110 mm capacity 60 degrees: round 120 mm Hedpfx Ahexaa H Ieusng vice 285 mm turning speed range: 36 / 72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 370 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - one-sided miter cut up to 60° - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - 2x saw band speeds - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, cutting diameter 225 mm capacity 90 degrees: flat 245 x 150 mm capacity 90 degrees: square 200 x 200 mm capacity 45 degrees: flat 160 x 140 mm capacity 45 degrees: round 160 mm capacity 45 degrees: square 140 x 140 mm capacity 60 degrees: flat 110 x 80 mm Hnodsxaa Dyopfx Ahueg capacity 60 degrees: square 90 x 90 mm capacity 60 degrees: round 90 mm vice 245 mm turning speed range: 46/92 m/min saw band length 2450 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 240 kg dimensions of the machine ca. 1.530 x 900 x 1.720 mm Equipment: - compact / robust manual band saw - with one-sided miter device up to 60° left - hydraulic lowering of the saw bow * stepless feed adjustment * limit switch at the end of the cut - 2x saw band speeds - saw band guide made of hard metal plates - manual vice with quick lock - machine base with - coolant device - manual saw band tension (star grip at the front) - 1x angle stop - 1x metal saw band - operating instructions

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm Hedoxaarkjpfx Ahueng capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mm Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - coolant system - operating instructions in German

Condition: new, cutting diameter 225 mm Hnjdpfx Ahoxaacioujg capacity 90 degrees: flat 245 x 150 mm capacity 90 degrees: square 200 x 200 mm capacity 45 degrees: flat 160 x 140 mm capacity 45 degrees: round 160 mm capacity 45 degrees: square 140 x 140 mm capacity 60 degrees: flat 110 x 80 mm capacity 60 degrees: square 90 x 90 mm capacity 60 degrees: round 90 mm vice 245 mm turning speed range: 46/92 m/min saw band length 2450 x 27 x 0,9 mm total power requirement 0,7 / 0,81 kW weight of the machine ca. 265 kg Equipment: - compact / robust manual band saw - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - hydraulic lowering of the saw bow * stepless feed adjustment * limit switch at the end of the cut - 2x saw band speeds - saw band guide made of hard metal plates - manual vice with quick lock - machine base - coolant device - manual saw band tension (star grip at the front) - 1x angle stop - 1x metal saw band - operating instructions