Bruce Johnston GmbH

Condition: used, Year of construction: 2009, cutting height (max.): 102 mm, cutting width (max.): 800 mm, saw blade diameter: 315 mm, planing width: 310 mm, total length of planing tables: 1,500 mm, total width: 2,120 mm, total length: 2,600 mm, total height: 1,300 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 10,000 rpm, overall weight: 900 kg, chip removal: 5 mm, chip removal for surfacing (max.): 5 mm, number of planer blades: 4, spindle speed (max.): 10,000 rpm, spindle speed (min.): 3,000 rpm, Equipment: scorer, No. 04501 5-fold combined machine Felder CF 531 Used, year of construction 2009, very good condition Circular saw tiltable - table router tiltable - surface planer / thickness planer - preparation for long hole drilling support / long hole drilling device Circular saw Motor power 3 kW Scoring unit Sliding table 2500 mm long Manual saw blade tilting 90° - 45° Saw blade diameter 250 - 315 mm Spindle diameter 30 mm Cutting height max. 102 mm Cutting width approx. 800 mm Outrigger table with telescopic cross-cut fence Pivoting cross-cut fence with degree scale Moulder Motor power 3 kW Moulder table opening diameter 180 mm Maximum cutter diameter 300 mm Spindle diameter 30 mm Manual spindle swivel 90° - 45° Speed 3000 / 6000 / 8000 / 10000 rpm Planer Motor power 3 kW 4-knife planer shaft Planer Table length 1500 mm Planer Table width 310 mm Nsdpfxjxzk Ths Ah Dsdd Chip removal max. 5 mm Parallel fence pivotable 0° - 45° Thicknesser Table length 540 mm Thicknesser width 306 mm Thicknesser height 4 - 220 mm Switchable feed rate 6 m/min Preparation for long hole drilling support / long hole drilling device Machine CE-compliant, GS-tested Technical documentation available as .pdf file Transport dimensions approx. 2600 x 2120 x 1300 mm LWH Weight approx. 900 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, pressure 25 t total power requirement 4 kW 200 mm inward space Nedpfx Aexzk S Djh Djdd

Condition: used, Year of construction: 2023, x-travel 1.620 mm y-travel 700 mm z-travel 640 mm Control Heidenhain table dimensions 1.700 x 620 mm spindle tunring speed 8.000 U/min tool taper SK 40 distance spindle /table 65 - 705 mm number of tool places 30 Pos. tool changing time 2,5 sec max. tool diameter 76 mm max. tool length 300 mm max. tool weight 8 kg rapid traverse ( x / y / z ) 30.000 mm/min T-slots (number x width x distance) 5 x 18 125 mm table load 1.300 kg auto power on hours ca. 4.900 h spindle hours ca. 1.250 h Nodpfxjxzk Sqs Ah Djdd In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2016, x-travel 600 mm y-travel 420 mm z-travel 450 mm Control Heidenhain distance spindle /table 120 - 570 mm table dimensions 750 x 420 mm spindle tunring speed 60 - 12.000 U/min torque 70 Nm power capacity 16 kW tool taper SK 40 number of tool places 30 Pos. tool changing time 1,5 sec max. tool weight 6 kg max. tool diameter 76 mm Njdpsxzk Skofx Ah Dodd max. tool length 250 mm rapid traverse 32 m/min feed 1 - 12.000 mm/min T-slots (number x width x distance) 5 x 14 x 65 mm weight of the machine ca. ca. 4.500 kg auto power on hours ca. 4.683 h spindle hours ca. 2.466 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2017, x-travel 1.000 mm y-travel 800 mm z-travel 700 mm Control Siemens 840D sl Operate spindle tunring speed 14.000 U/min torque 160 Nm power capacity 29 kW swivelling range 0 - 180 ° tool taper SK 40 rotary table adjustment 360 ° Rotary table dimensions 1.000 x 800 mm number of tool places 54 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: Nedpfxjxzk Sdo Ah Dedd - 40 bar internal coolant supply - Swivel milling head - Integrated rotary table - Workpiece touch probe with wireless transmission, Heidenhain TS 460 - Coolant and compressed air gun - Chip conveyor - Coolant system - Electronic handwheel - Work area light - Siemens Sinumerik 840D sl Operate control with MDynamics - 5-axis machining package Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2005, control Heidenhain x-travel 900 mm y-travel 900 mm z-travel 500 mm a-axis -30/+110 ° c-axis 360 ° table diameter 800 mm table load 1.000 kg spindle tunring speed 18.000 U/min Ndsdpoxzk R Tefx Ah Dsd spindle drive 40 kW torque 137/100 Nm tool taper HSK-63 A number of tool places 30 Pos. max. tool diameter 90 mm max. tool length 300 mm max. tool weight 10 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2004, weight of the machine ca. 5500 kg Nodpfxoxzk R He Ah Djdd

Condition: used, Year of construction: 1999, x-travel 600 mm y-travel 560 mm z-travel 560 mm Ndsdpfx Ahexzk Rys Dod weight of the machine ca. 8500 kg

Condition: used, Year of construction: 2010, turning diameter 370 mm turning length 424 mm Nsdpfxsxzk Rto Ah Dodd control Fanuc

Condition: used, Year of construction: 2005, control Traub TX8i weight of the machine ca. 4000 kg Ndedpfx Ahoxzk Rms Djd

Condition: used, Year of construction: 1998, x-travel 840 mm y-travel 860 mm Ndsdpfxjxzk Rgj Ah Dod z-travel 840 mm control Fanuc MCS-516

Condition: used, Year of construction: 2003, x-travel 3000 mm y-travel 800 mm Ndjdexzk Raspfx Ah Djd z-travel 800 mm weight of the machine ca. 16000 kg

Condition: used, Year of construction: 1999, x-travel 505 mm y-travel 355 mm z-travel 610 mm control Heidenhain TNC 430 weight of the machine ca. 4000 kg Njdpfx Ahjxzk N Nj Djdd

Condition: used, Year of construction: 2017, x-travel 550 mm y-travel 400 mm z-travel 400 mm Njdpfexzk N Ajx Ah Dsdd weight of the machine ca. 9000 kg

Condition: used, x-travel 1050 mm Ndjdexzk Nvspfx Ah Dod y-travel 600 mm z-travel 600 mm weight of the machine ca. 7200 kg

Condition: used, Year of construction: 2013, x-travel 650 mm Nsdjxzk Npopfx Ah Dedd y-travel 765 mm z-travel 520 mm weight of the machine ca. 10000 kg

Condition: used, Year of construction: 2000, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Photo of machine already delivered in similar scope: -major maintenance -New table geometry -partial painting of the interior Nsdpfx Ahoxzk Nio Dsdd grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Paper belt filter

Condition: excellent (used), Year of construction: 1996, Description follows Njdpfx Aexzk Ncsh Dsdd

Condition: excellent (used), Year of construction: 1986, plate thickness 5 mm sheet width 40 mm Ndjdpfx Aoxzk I Ssh Dsd

Year of construction: 2010, condition: excellent (used), Description to follow! Njdpfjxzk I Eox Ah Djdd

Condition: excellent (used), Year of construction: 1992, Description to follow! Nodpfx Ahexzk Ixe Djdd

Condition: excellent (used), Year of construction: 1975, O F F E R We are pleased to offer you, subject to prior sale and errors excepted, the following available ex-stock: DECKEL Universal Tool Milling Machine Model: FP 2 Year of manufacture: approx. 1975 _____ Table travel: - Longitudinal (motor/manual): 390 / 400 mm - Vertical (motor/manual): 390 / 400 mm Cross slide travel (motor/manual): 190 / 200 mm Fixed angle table: 250 x 700 mm Distance from spindle to table: 400 mm Spindle overhang: approx. 165–465 mm Nedpfexzk Irex Ah Djdd Spindle taper: SK 40 18 spindle speeds: 40–2,000 rpm Infinitely variable feed range: 5–400 mm/min Rapid traverse: 1,200 mm/min Spindle drive: 2.2 kW Total drive: 2.5 kW - 380 V - 50 Hz Weight: 1,000 kg Accessories / Special equipment: • DECKEL universal swivel angle table approx. 250 x 700 mm, mounted • Original DECKEL universal dividing head with tailstock and faceplates • Original DECKEL high-speed vertical milling head with independent drive • Large original DECKEL tool cabinet for storage of the above accessories and various arbors, approx. 30 collets, various milling tools, additional arbors, etc., as well as operation tools, separate electrical cabinet, coolant system Condition: Very good – demonstration ready, ideal for training workshops/apprenticeship use Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice We always have further DECKEL FP 1 / FP 2 / FP 4 milling machines in stock, as well as accessories such as spiral milling attachments, etc.

Condition: excellent (used), Year of construction: 1990, Description to follow! Nsdpfx Aexzk Ilsh Djdd

Condition: used, Year of construction: 2017, turning diameter max. 356 mm turning length 705 mm control M730 UM Mapps CELOS greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bore 80 (91) mm C-Axis 0,001 ° Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm C-Axis 0,001 ° x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 4,2 kW total power requirement 41 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 4,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Subspindle - Tool-Drive - C, Y-Axis - only 1.237h Spindle hours Ndedpfxexzk Ifs Ah Djd

Condition: used, Year of construction: 2012, turning diameter max. 366 mm turning length 705 mm Nedsxzk H Uspfx Ah Dodd control M 730 BM MAPPS IV greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bearing diameter 140 mm spindle bore 91 mm Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle nose JIS A2-5 spindle bearing diameter 85 mm spindle bore 43 mm x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 41 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 4,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter MORI SEIKI - NLX 2500 SY / 700