ALBOMA GmbH

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 38 mm, turning diameter over bed slide: 320 mm, turning length: 910 mm, total length: 700 mm, total width: 1,610 mm, total height: 1,350 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 65 rpm, metric thread diameter (max.): 6 mm, metric thread steps: 23, overall weight: 272 kg, three-jaw chuck diameter: 160 mm, The HOBBY 910 G lathe in its standard configuration is equipped with a leadscrew and feed shaft for threading, as well as automatic longitudinal and cross feed. The 12-speed gearbox allows for quick speed adjustment without the need to change the V-belt. Due to its compact design and substantial weight, the machine ensures quiet operation combined with high precision. - Easy and rapid spindle speed change via gearbox - High concentric accuracy thanks to precision ball bearings - Powerful drive motor with high torque, spindle speed range 65 - 1650 rpm - Wide range of applications: precision mechanics, vocational and educational training centers, etc. - Simple feed setting design, smooth and precise shifting - Robust machine bed with inductively hardened and ground guideways - Optimized for machining steel, non-ferrous metals, and plastics - Standard equipment includes a leadscrew for automatic longitudinal and cross feed - Carriage with hand wheels and precision scale Centre distance: 910 mm Centre height: 160 mm Swing over bed: 320 mm Bed width: 160 mm Spindle bore: 38 mm Spindle mount taper: MT 5 Spindle speed min.: 65 rpm Spindle speed max.: 1650 rpm Speed change - number of gears / stepless: 12 Longitudinal feed range: 0.087 – 2.049 mm/rev Cross feed range: 0.019 – 0.444 mm/rev Metric thread pitch: (23) 0.25 – 6 mm Inch thread pitch: 4 – 120 TPI Blodpfxsyn Amne Aa Hsd Quill travel: 75 mm Tailstock taper: MT 3 Motor power: 1.5 kW Continuous motor power S1 100%: 1.1 kW Voltage: 230 V Dimensions (W x D x H): 1610 x 700 x 1350 mm Weight approx.: 272 kg

Condition: good (used), Technical Specifications HBX 360 Distance between centers (mm): 750 Center height (mm): 180 Max swing over bed (mm): 360 Max swing over cross slide (mm): 180 Spindle bore (mm): 37 Max cross slide travel (mm): 180 Cross slide width (mm): 160 Tailstock quill travel (mm): 150 Tailstock quill diameter (mm): 46 Bed width (mm): 335 Compound slide travel (mm): 110 Compound slide width (mm): 110 Bledpfx Ajynr Syea Hsd Type of quick-change toolpost Spindle taper Tailstock Morse taper: MT5 Spindle speed (rpm): 50 to 3000 Spindle speed variator: Yes (hydraulic) Spindle motor power (kW): 4.5 Cross feed range (m/min): 0.0125 to 5.6 Rapid longitudinal feed range (m/min): 56 to 112 Threading: Yes Metric threads (number) (mm): 0.5 to 56 Whitworth threads range (TPI): 1/2 to 56 Brake motor Electrical supply: 380V three-phase Dimensions (mm): 2000 x 1000 x 1250 Weight (kg): 1300 Chuck: Manual Ø200 mm / 3-jaw Equipment: - 2-axis digital readout - Lighting - Manual 3-jaw chuck - Quick-change toolpost - Foot brake

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, Centre height: 180 mm Centre distance: 1000 mm Spindle bore: 56 mm Bljdpfx Aaeynn Abj Hjd Spindle speeds: 25 - 2000

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Centre Lathe Model Condor B, Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout from Training Workshop Technical Data: >> Year of manufacture: 1991, Machine No.: 91-1624 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.18 to 28 mm >> Spindle brake >> Weight approx. 1100 kg >> Spindle brake engageable >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pc. 3-jaw chuck with wedge bars and 1 set of jaws >> Tool holder with 7 tool pockets >> Bed stop Blsdpfoym Srqox Aa Hjd >> Machine mounts >> Drill chuck >> Live center >> Coolant system About the Machine: Offered here is a used Weiler Condor B lathe, year 1991, in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The Weiler comes from a training workshop and has been very well-maintained. The 3-axis Heidenhain digital readout makes work even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our site.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout from a Training Workshop Technical Data: >> Year of manufacture: 1987 / Machine No.: 87-674 >> Centre height: 165 mm >> Distance between centres: 750 mm >> Spindle speeds: 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock taper: MT 3 >> Feeds: 0.015 to 0.46 mm/rev >> Thread cutting capability: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.18 to 28 mm >> Spindle brake >> Weight: approx. 1,100 kg >> Switchable spindle brake >> Dimensions (LxHxD): 1.83 m x 1.29 m x 0.88 m Included Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pc. 3-jaw chuck with one set of jaws (wedge type) >> Quick collet change system with collets from 1–29 mm in 0.5 mm increments >> Toolholder with 7 tool pockets >> Bed stop Bsdpfx Aasym Slws Hjld >> Machine feet >> Drill chuck >> Live centre >> Coolant system About the Machine: Offered here is a used Weiler Condor 81 lathe, year 1987, in very good condition. The machine is, of course, fully functional. It is a very robust and powerful machine. Coming from a training workshop, the Weiler is extremely well maintained. The 3-axis Heidenhain digital readout allows for easier and more precise operation. The machine has been electrically and mechanically inspected by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power on site.

Condition: not inspected (used), functionality: unexamined, turning diameter: 340 mm, center height: 170 mm, spindle speed (max.): 2,000 rpm, overall weight: 1,200 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Bedsym N Nyepfx Aa Hjld Swing diameter over bed: 340 mm Swing diameter over cross slide: approx. 260 mm Center height over cross slide: 130 mm Center height over bed: 170 mm Center distance: 700 mm Spindle speed: 25 – 2,000 rpm Spindle bore: 48 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 12 A Connected load: 4.8 kW Dimensions & Weight Dimensions (L x W x H): 1,800 x 700 x 1,500 mm Weight: 1,200 kg EQUIPMENT Tailstock Multifix quick-change toolholder Quick-action chuck Including collets Various accessories External reference: Weitner

Condition: not inspected (used), functionality: unexamined, turning diameter: 360 mm, center height: 180 mm, overall weight: 1,000 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within one of the following periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Swing diameter over bed: approx. 360 mm Swing diameter over cross slide: 240 mm Center height over cross slide: 120 mm Center height over bed: approx. 180 mm Spindle bore: approx. 48 mm Center distance: approx. 700 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Connected load: 4.8 kW Bsdpsym N D Dsfx Aa Hold Dimensions & Weight Dimensions (L x W x H): 1,800 x 900 x 1,600 mm Weight: 1,000 kg EQUIPMENT Tailstock Multifix quick-change tool post Quick-change chuck Various steadies Digital readout External reference: Lot 18 / Ulmer

Condition: not inspected (used), functionality: unexamined, turning diameter: 300 mm, center height: 150 mm, overall weight: 800 kg, No reserve price – guaranteed sale to the highest bidder! Blsdpfxoym N A Ho Aa Hed Placing a bid obligates the buyer to collect the item within the specified time frame: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter over bed: 300 mm Swing diameter over cross slide: 200 mm Centre height over bed: 150 mm Centre height over cross slide: 100 mm Centre distance: 500 mm Spindle bore: approx. 28 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,400 x 700 x 1,600 mm Weight: 800 kg EQUIPMENT Multifix turning tool holder Four-jaw chuck (Ø 130 mm) Digital readout by HEIDENHAIN External reference: Mahle

Condition: ready for operation (used), functionality: fully functional, turning diameter: 300 mm, center height: 150 mm, spindle speed (max.): 2,800 rpm, overall weight: 1,030 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified period: either between 11/05/2026 and 13/05/2026, or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter over bed: approx. 300 mm Swing diameter over cross slide: 200 mm Centre height over cross slide: 100 mm Centre height over bed: 150 mm Centre distance: 750 mm Spindle bore: approx. 35 mm Spindle speed: 40 – 2,800 rpm MACHINE DETAILS Operating voltage: 380 V Connected load: 3 kW Rated current: 25 A Frequency: 50 Hz Dimensions & Weight Blodpfx Aeym N Aasa Hed Dimensions (L x W x H): 1,860 x 700 x 1,800 mm Weight: 1,030 kg EQUIPMENT Tailstock Multifix Type B toolholder 3-jaw chuck (diameter: 160 mm) 2-axis digital readout by RSF External reference: Mahle

Condition: ready for operation (used), functionality: fully functional, turning diameter: 340 mm, center height: 170 mm, spindle speed (max.): 2,800 rpm, overall weight: 800 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified period either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter over bed: 340 mm Bledpfx Aasym Nz No Hjd Center height over support: 100 mm Swing diameter over support: approx. 200 mm Distance between centers: 750 mm Center height over bed: 170 mm Spindle speed: 12 – 2,800 rpm Spindle bore: approx. 38 mm MACHINE DETAILS Operating voltage: 380 V Control voltage: 220 V Connected load: 3 kW Rated current: 6.25 A Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 1,700 x 650 x 1,500 mm Weight: 800 kg EQUIPMENT Tailstock Multifix tool holder RÖHM three-jaw chuck (Ø 160 mm) External Reference: Mahle

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Weiler Centre Lathe Model Condor B, Leadscrew and Feed Shaft Lathe with 3-Axis Heidenhain Digital Readout from Training Workshop Technical Data: >> Year of manufacture: 1990, Machine no. 90-1419 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5, with bayonet lock >> Tailstock Morse taper: MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Spindle brake >> Weight approx. 1100 kg >> Switchable spindle brake Blsdpfx Aasym Dczs Hsd >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pcs 3-jaw scroll chuck with 1 set of jaws >> Toolpost with 7 tool holders >> Bed stop >> Machine mounts >> Drill chuck >> Live center >> Coolant system About the machine: Offered here is a used Weiler Condor B lathe, year of manufacture 1990, in very good condition. The machine is of course fully functional. A very sturdy and powerful machine. The Weiler comes from a training workshop and is very well maintained. The 3-axis Heidenhain digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us, and a full oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our premises.

Condition: like new (used), functionality: fully functional, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Readout, newly overhauled, with acceptance protocol for tolerances equivalent to new machines. Technical Data: >> Machine Serial No.: 2268-87 >> Centre Height: 180 mm Blsdsymznhspfx Aa Hod >> Distance Between Centres: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Camlock >> Tailstock Morse Taper 4 >> Feed Rates: 0.026 to 0.888 mm/rev >> Thread Cutting Capability: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake can be engaged >> Drive Power: 2.0/4.0 kW >> Dimensions (LxHxD): 2.2 m x 1.5 m x 1 m Equipment and Accessories: >> 3-axis K&C Digital Readout, new, with 12-month manufacturer’s warranty and manual >> NEW 3-jaw chuck, 200 mm, with 2 sets of jaws >> Multifix size B with 3 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine light Safety Features: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The ways have been reground or hand-scraped. Acceptance is according to inspection protocol. Finished in 2K gloss white paint. Multifix toolpost and chuck are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and is capable of producing ground-like surface finishes. Take advantage of the opportunity to inspect the machine under power on-site and see its condition for yourself.

Condition: ready for operation (used), Year of construction: 2018, Immediately available from university: As-new L & Z lathe Knuth, Type Basic 180 Super, year 2018. Centre height 180 mm, swing over bed 360 mm, swing over cross slide 220 mm, turning length 1000 mm, spindle bore 38 mm, spindle speeds 45 – 1800 rpm, tailstock MK 4, 2-axis digital readout, chuck, tool holder, steady rest, tailstock, drive 3.5 kW, weight 1 t. Priced at €3,000 plus VAT ex location. Bledpfx Aaeyl Uc No Hod

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Weiler Praktikant 160 B Lead and Feed Screw Lathe with Toolmaker Precision, Year of Manufacture 2003, with 3-Axis Digital Readout ACU RITE, in Excellent Condition, CE Compliant Technical Data: - Year of manufacture: 2003 Machine No. 4391 - Centre height: 160 mm - Centre distance: 650 mm - Spindle speeds: from 24 to 2500 rpm - Spindle bore: 40 mm - Camlock Spindle Nose DIN 55027 Size 5 with Bayonet Lock - Tailstock taper: MK 3 Bljdpeyly Nnefx Aa Hed - Feeds: from 0.02 to 0.63 mm/rev - Thread cutting: Metric, Inch, Module, and Diametral Pitch - Metric thread pitches: from 0.25 to 8 mm - Weight: approx. 680 kg - Spindle brake can be engaged - Dimensions (L x H x D): 1.6 m x 1.25 m x 0.7 m Accessories and Features: - 3-axis digital readout ACU RITE - Quick collet chuck with collets from 3 to 30 mm, incremental by 1.0 mm - Röhm 160 mm 3-jaw chuck with 1 set of jaws - Multifix size A with 3 tool holders - Coolant system - Machine lamp - Electronic spindle guard - Machine feet - Bed stop - Splash guard - Operating manual and spare parts list About the Machine: Offered here is a Weiler Praktikant 160 B lead and feed screw lathe, year 2003, in excellent condition. The machine comes from a large enterprise and was only used very occasionally. This is a very well-maintained lathe, equipped with spindle safety features. All carriage movements are smooth and consistent. Even at high speeds, the Weiler operates quietly. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like surface finishes. The Heidenhain digital readout makes work even simpler and more precise. Take advantage of the opportunity to view this machine under power on-site and see its condition for yourself.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout by Heidenhain – Very Good Condition! Technical Data: >> Year of manufacture: 1991 | Machine No.: 3140 >> Centre height: 180 mm >> Distance between centres: 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore: 56 mm >> Short-taper spindle nose DIN 55027 size 6 with bayonet lock Bjdpsylh Ncsfx Aa Hjld >> Tailstock taper: MK 4 >> Feeds from 0.026 to 0.888 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake selectable >> Motor power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Includes and features: >> Heidenhain 3-axis digital readout >> 200 mm three-jaw chuck, 2 sets of jaws >> Multifix size B with 3 tool holders >> Drill chuck, live centre >> Bed stop >> Machine feet About the machine: For sale is a Weiler Commodor lathe in very good, fully operational condition. The machine comes from a state-operated workshop and has seen little use. The Commodor is one of the largest manual lathes manufactured by Weiler – a very robust and powerful machine. The 3-axis digital readout by Heidenhain makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our premises.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 8001172087, turning diameter over cross slide: 300 mm, turning diameter over bed slide: 460 mm, center height: 230 mm, spindle speed (max.): 1,250 rpm, spindle speed (min.): 28 rpm, center height over cross slide: 150 mm, No minimum price – guaranteed sale to the highest bidder! Bidding obligates you to collect the item on time between 08.04.26 and 16.04.26! Bedeyk Hzzopfx Aa Held TECHNICAL DETAILS Spindle speed range: 28 to 1250 rpm Spindle bore: 58 mm Distance between centres: approx. 1000 mm Centre height above bed: 230 mm Centre height above cross slide: 150 mm Turning diameter over bed: 460 mm Turning diameter over cross slide: 300 mm Three-jaw chuck diameter: 250 mm Three-jaw chuck manufacturer: FORKARDT MACHINE DETAILS Operating voltage: 380 V Control voltage: 220 V Frequency: 50 Hz Dimensions & Weight L x W x H: 3000 x 1000 x 1800 mm Machine weight: 2 t EQUIPMENT Tailstock Multifix quick-change toolpost Matching workshop cabinet with accessories

Condition: good (used), L&Z - Lathe GALLIC 16 N incl. 3-axis digital readout ACU-Rite - Centre height: 165 mm - Swing over bed: 325 mm - Distance between centres: 1000 mm - 3-axis digital readout Acu-Rite Bsdpeyk Ehmjfx Aa Hsld - Spindle speed range: 45 – 2500 rpm - Automatic longitudinal / cross feeds - Spindle bore approx. 40 mm - Quick-change toolholder - Threads / Metric / Inch etc. - Tailstock MK 4 - Electrical chuck guard - 3-jaw chuck - Chip guard at rear Dimensions (LxWxH): 2.1x1.2x1.7 metres / Weight: 1700 kg Subject to errors and omissions.

Condition: good (used), Machine number: 8025 Type / Model: DZFG 200 x 500 Control: conventional Centre distance: 500 mm Spindle bore: 32 mm Bjdpfx Aeykt Dvea Hjld Centre height: 160 mm Swing diameter over bed: over cross slide: 315 mm 200 mm Speed range: 56 to 2,800 rpm Feed long: face: 0.02 to 0.8 mm/rev 0.01 to 0.4 mm/rev Connection: 5.5 kW Accessories / Equipment: Condition: good Weight: 1.9 t Dimensions: 2,100 x 1,100 x 1,400 mm

Condition: used, Year of construction: 2018, functionality: fully functional, OPTIturn TH 4010D Lathe Precision, geared lathe with digital position display, center height/distance 205 mm / 1000 mm, motor power 2.4 kW, 400 V, spindle speed 45-1800 rpm, spindle bore Ø 52 mm, spindle foot brake, with automatic longitudinal and cross feeds, CAMLOCK chuck mount, universally applicable workshop machine. Includes machine base with chip drawer, LED work light, coolant system, etc. Fully equipped engine lathes. Hardened and ground bed guideways Spindle mount: Camlock DIN ISO 702-2 No. 5 Guaranteed spindle nose runout accuracy better than 0.015 mm Gears and shafts hardened and ground, running in oil bath on precision bearings Motor circuit breaker DC 24 Volt electrics Lockable main switch Spindle direction (right/left) switchable at bed carriage Removable chip tray with guide rails Safety handwheels with disengage function on X and Z axes Emergency stop pedal Machine base with tool compartment on the right side. Digital Position Display DPA 21 User-friendly membrane keypad, splash-proof, sealed and glare-free Increased working accuracy Reduced error rate thanks to clear layout X, Y/Z0, Z axes with separate 8-digit displays Supplied sensor for spindle speed detection Blodjykngrjpfx Aa Hjd Glass scales on all three axes Connection voltage: 400 V Drive power: 2.4 kW Protection: 16 A Spindle taper: MT 6 Spindle mount: Camlock No. 5 Spindle bore: 52 mm Center height: 205 mm Center distance: 1000 mm Swing over bed: Ø 410 mm Swing over cross slide: Ø 270 mm Swing without gap bridge: Ø 540 mm Turning length in bed gap: 165 mm Bed width: 206 mm Spindle speed: 45 – 1800 rpm Number of gear steps: 16 Top slide travel: 100 mm Cross slide travel: 195 mm Longitudinal feed: 0.043 – 0.653 mm/rev Number of longitudinal feeds: 48 Cross feed: 0.015 – 0.206 mm/rev Number of cross feeds: 48 Metric thread pitches: 0.4 – 7 mm/rev Number of metric thread pitches: 42 Imperial thread pitches: 70 – 4 tpi Number of imperial thread pitches: 42 Maximum tool shank height: 16 x 16 mm Tailstock taper: MT 3 Tailstock quill stroke: 130 mm Quill diameter: Ø 45 mm Dimensions (L x W x H): 1920 x 740 x 1555 mm Weight: 750 kg

Condition: good (used), WEILER COMMODOR L&Z Lathe from German Army (Bundeswehr) stock - Good, fully operational condition - Turning diameter: 180 mm - Turning length: 1000 mm - Bar passage: 56 mm - Speed range: 25 - 2000 rpm - Threads: Metric / Inch etc. Bodsykknfspfx Aa Hjld - Automatic longitudinal & cross feeds - Tailstock MT 4 - 3-jaw chuck 250 mm - Electric chuck guard - Multifix base holder & inserts - Coolant system - Chip guard rear wall - Machine documentation Dimensions (LxWxH): 2.5 x 1.3 x 1.7 meters / Weight: 1500 kg Subject to errors and omissions

Condition: good (used), Centre height: 180 mm Centre distance: 1000 mm Swing diameter over bed: 360 mm Swing diameter over cross slide: 205 mm Blsdpfx Aoykkbroa Hod Swing diameter in gap: 560 mm Spindle bore: 51 mm Bed width: 290 mm Speed range: 46 - 1750 rpm Feeds & threads: yes Quill stroke: 170 mm Quill diameter: 52 mm Tailstock taper: MT 4 Drive power: 3 kW Dimensions (L x W x H): 1850 x 900 x 1380 mm Weight: approx. 1,400 kg Accessories / Special Features: • 3-axis digital readout, HEIDENHAIN • 3-jaw scroll chuck, Ø 200 mm • Gap bed • Steady rest • 4-position quick-change toolpost • Bed stop • Coolant system • Hinged chuck guard • Lighting The machine comes from a training workshop and is in a very well-maintained condition. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2011, centre height 190 mm centre distance 1200 mm turning diameter over bed 370 mm turning diameter over slide rest 230 mm turning dia. in gap 475 mm spindle bore 59 mm spindle turning speed range 35-2000 U/min Bsdpfx Aaeyi Hvij Held total power requirement 5,5 kW weight of the machine ca. 1,6 t dimensions of the machine ca. LBH 2,5 x1,0x1,4 m Very well-maintained machine Includes FAGOR digital readout Includes rapid traverse via joystick Includes central lubrication Includes Multifix tool system with 3 cassettes Includes chuck with additional jaws Includes center point Includes documentation

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 1324, spindle bore: 42 mm, total length: 2,000 mm, total width: 1,000 mm, total height: 1,800 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 22 rpm, overall weight: 1,500 kg, WEILER CONDOR B Lead and Feed Screw Lathe - Operating voltage: 380 V - Control voltage: 220 V - Connection: 3 kW - Rated current: 25 A - Frequency: 50 Hz Bsdpjyiztisfx Aa Hold - Centre distance: approx. 700 mm - Centre height over bed: 170 mm - Swing over bed: 340 mm - Centre height over cross slide: 100 mm - Swing over cross slide: 200 mm The machine is equipped with a tailstock, a Multifix tool holder, type B, as well as a 3-jaw chuck by RÖHM, diameter: 150 mm. Additionally, it features a digital readout by ELESTA, model: VISULESTA 4, including a matching workshop drawer cabinet with suitable accessories for the machine. FCA D-73235 Weilheim Teck – loaded onto truck

Condition: used, Lead screw/Feed shaft lathe US 400 Turning length: 1000 mm Centre height: 200 mm Spindle speeds: 31 – 2000 rpm 3-jaw chuck (⌀ 200 mm) Spindle bore: 45 mm Motor with brake Emergency stop switch Chuck guard without microswitch Including cabinet and contents Blodsyiy Swjpfx Aa Hod

Condition: good (used), Subject to differential taxation according to §25a of the VAT Act. You will receive a proper invoice, however, VAT will not be shown separately. Internal item no.: 26010 Blodpfx Aajyg Dtge Hsd You are welcome to inspect the machine under power in our heated warehouse of over 500 m². Leadscrew and feedshaft lathe Voest Alpine DA180 + Coolant system + Röhm 200 four-jaw chuck + Chuck guard (with switch) + Multifix "B" Motor: 380 Volt / 5.5 kW Speed: 44 - 2,000 rpm Swing over bed: 380 mm Swing over cross slide: 185 mm Turning length: 1,000 mm Centre height: 180 mm Bed width: 330 mm Spindle bore: 52 mm Tailstock taper: MK 4 Dimensions (LxWxH): 220 x 120 x 160 cm Weight: approx. 1,200 kg The machine comes from an educational institution and is in well-maintained condition.