Kayugroup Helvetica GmbH

Condition: excellent (used), Year of construction: 1995, operating hours: 9,000 h, functionality: fully functional, power: 206 kW (280.08 HP), overall weight: 9,960 kg, Jenz AZ 35 D/Shredder/Chipper/Crusher • Manufacturer: Jenz • Model: AZ 35D • Year of manufacture: 1995 • Operating hours: 9,000 h • Engine power: 206 kW/280 HP • Rotor width: approx. 800–1000 mm • Rotor diameter: approx. 600–800 mm • Number of knives: approx. 2–4 main knives + counter knives • Hydraulic feed with two feed rollers • Infeed opening: approx. 800 x 600 mm • Conveyor belt length: approx. 3 – 5 meters • Logs up to approx. 30–40 cm diameter Guedpfxoy Axurs Ad Hoa • Engine: Mercedes Benz • Total weight: 9,960 kg • German machine • Immediately ready for use • This offer is non-binding and subject to change without notice. - Subject to prior sale, - Errors and/or typographical mistakes excepted. - Sale according to our terms and conditions.

Condition: excellent (used), Catalogue number 7374 TECHNICAL DATA - Upper feed hopper dimensions (L/W): 840x620 mm - Lower feed hopper dimensions (L/W): 300x300 mm - Rotor width: 340 mm - Motor: 22 kW - Screen: 15 mm - Number of knives: 6 pcs - Discharge for shredded wood: Ø 160 mm - Dimensions (L/W/H): 1400x800x2000 mm - Weight: 840 kg ADVANTAGES – German-made – Very good condition – Used wood chipper Net price: 23,900 PLN Gusdpfxjy At Nqe Ad Hja Net price: 5,690 EUR based on an exchange rate of 4.2 EUR (Prices may vary significantly with currency fluctuations)

Condition: excellent (used), Catalogue number 7291 TECHNICAL DATA - Infeed width: 500mm - Infeed height: 200mm - Shaft width: 630mm Guedpfx Adoy Athto Hsa - Knife length: 630mm - Number of knives: 2 pcs - Sieve dimensions: 60x60mm - Lower toothed feed shaft - Lower shaft motor: 4kW - Upper toothed feed shaft - Upper shaft motor: 4kW - Feed belt length: 4100mm - Feed belt width: 400mm - Feeder motor approx. 2kW - Main motor: 55kW - Autoreverse - Feeder dimensions (L/W/H): 4670x760x720mm - Machine dimensions (L/W/H): 2550x1800x1300mm - Weight approx. 4000kg – German-made – Autoreverse – Used chipper, in very good condition Original photos Net price: 118,900 PLN Net price: 28,300 EUR (based on exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: defective spare-parts repository (used), Year of construction: 1995, Shredder, make Weima WL 14, with fire damage – for dismantling or refurbishment. The following parts can still be used: base frame with hopper and drawer, rotor with gearbox, discharge screw, perforated screen. All other components must be replaced. Gusdjy Aryuepfx Ad Hsa

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 15 kW (20.39 HP), overall weight: 1,200 kg, total length: 1,640 mm, total width: 1,200 mm, total height: 1,750 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 15, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Recyclable Material Shredder Chipper Wood Shredder MHR630 ecoline The MHR ecoline series are robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These plug-and-play shredders impress with high performance, low energy consumption, and an excellent price-performance ratio. This makes the chippers ideal for workshops, recycling companies, and woodworking businesses seeking an economical yet powerful solution. Advantages - Continuous, uniform shredding process - High performance with low energy consumption - Rugged construction - Larger feed opening - Excellent price-performance ratio - Plug-and-play (5-pin CEE plug, 400V, 32A three-phase) - Siemens PLC controlled - MHR630 ecoline Rößler recyclable material shredder "Made in Germany" Gusdpfjy Ah E Tex Ad Hea

Condition: reconditioned (used), Year of construction: 1993, operating hours: 4,110 h, functionality: fully functional, power: 22 kW (29.91 HP), overall weight: 2,500 kg, Residual Wood Chipper / Wood Shredder / Slow-Speed Pusher Floor Grinder Refurbished WEIMA Model: WL10 Year of manufacture: 1993 Extraction diameter: 250 mm Motor power: 22 kW Rotor length: 98 cm Feed hopper approx. 120 x 100 cm Number of knives: 24 pcs. Knife dimensions: 30 x 30 mm Screen: 30 mm (includes second screen: 35 mm) Dimensions approx. 2.5 x 1.7 x 1.85 m Weight approx. 2,500 kg The machine has been refurbished: - Rotor shaft newly mounted - New paintwork - Pusher floor sliding rails replaced - Oil changed - Rotor shaft overhauled (partially new knives and holders, etc.) Gsdpjy Ahr Hsfx Ad Hjua Condition as shown in images; please also refer to the item description. Collection by the buyer is possible. All dimensions are approximate. All information given to the best of our knowledge, but without guarantee. Subject to prior sale. Items can be collected by the buyer or shipped at the buyer's expense. Shipping costs are provided as a guideline; final costs may vary depending on distance and unloading options. The stated sales price is the net final amount, plus VAT. An invoice with VAT shown will be issued. Warranty basis: Due to wear and tear of used parts, the items are generally sold as defective – for spare parts only and to business buyers. By submitting a bid, the buyer accepts this as the basis of the sales contract. For used items, warranty period is 12 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, any warranty is excluded. For new items, warranty period is 24 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: used, Year of construction: 2008, power: 90 kW (122.37 HP), Hacker Rudnick&Enners RE-TH 250/650/5 250 mm height 650 mm width Power 90 kW Cassel metal separator Approx. 40 linear meters of vibrating troughs Gedpfxsy Adk So Ad Houa

Condition: like new (used), Year of construction: 2021, As-new Vecoplan VTH 250x650 HxB shredder Power 75 kW Cassel metal detector Gedpjy Adk Eofx Ad Houa Including control cabinet

Condition: excellent (used), Catalogue number 7836 Gusdsyz Simepfx Ad Hja TECHNICAL DATA - Loading hopper inlet 800x600mm - Outlet for shredded wood diameter 160mm - Rotor working width 580mm - Main motor 22kW - Pump motor 0.75kW - Number of knives 15 pcs - Knife dimensions (crown type) 40x40mm - Screen 25mm - Hydraulic pusher drawer - Electric autoreverse - Dimensions (L/W/H) 1730x1200x1620mm - Weight 1100kg ADVANTAGES – German-made – Operating documentation (DTR) – Hydraulic pusher drawer – Autoreverse – Used chipper, in very good condition Net price: 39,900 PLN Net price: 9,500 EUR (based on rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7611 Technical specifications: - Inlet dimensions: 460x180mm - Outlet diameter: 300mm - Shaft width: 550mm - Shaft diameter: 350mm - Number of knives: 10 pcs - Knives arranged in 2 rows - Autoreverse function Guedpfx Ajyz Sgfod Hea - Knife setting device - Sieve diameter: 30mm - Feeding conveyor from top and bottom - Bottom pull shaft - Feeding conveyor length: 4400mm - Main motor: 37kW - Upper feed motor: 1.5kW - Lower feed motor: 2.2kW - Dimensions (L/W/H): 6100x1150x1000mm - Weight approx: 3500kg ADVANTAGES – German-made – Autoreverse function – Feeding conveyor from top and bottom – Knife setting device – Very good condition – Used shredder Net price: 98,900 PLN Net price: 23,550 EUR Net price calculated at 4.2 PLN/EUR (Price may change with significant currency fluctuations)

Condition: excellent (used), CATALOG NUMBER 6875 Gsdpeyz In Eefx Ad Heua TECHNICAL DATA - Feed opening width: 720 mm - Feed opening height: 160 mm - Thickness of material to be shredded: 160 mm - Shaft width: 720 mm - Shaft diameter: 600 mm - Knife length: 80 mm - Number of knives: 4×12 pcs - Screen size: 25 mm - Entry pressure feed roller: 0.75 kW - Bottom gear-driven feed roller: 1.8 kW - Top gear-driven feed roller: 1.8 kW - Vibrating chute length: 4470 mm - Vibrating chute width: 710 mm - Vibrating chute motor: 2.2 kW - Main motor: 55 kW - Autoreverse - Extraction nozzle diameter: 260 mm - Vibrating chute dimensions (L/W/H): 4470/950/930 mm - Machine dimensions (L/W/H): 3100/1500/1170 mm - Total weight: approx. 5500 kg – German-made – Very low hours of use – Original documentation - Autoreverse (adjustable) – Used shredder, in very good / excellent condition Net price: 159,900 PLN Net price: 38,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2001, overall weight: 16,000 kg, - Building year 2001 - Infeed height 350 / 400mm - Infeed width 1.600mm - Rotor Ø 1.200 mm - motor 180 KW - Weight 16 to Gujdpfx Adoyzn S Ds Hsa Possible drive power 160 - 400 KW Possible throughput up to 60 to/ h, with the right material and motor. Many parts are new as rotor bearings, infeed roller bearings, screen, hammer, anvil, etc. Optional: drive motor, electrical control, infeed shaker.

Condition: good (used), Year of construction: 1993, Offered for sale is a used Zeno drum chipper, year of manufacture 1993. Type 1400x1600 mm. 97L-4538. Main motor: 75 kW, 1500 rpm. Hydraulic motor: 4 kW. Includes spare gearbox. Guodpfx Adeyznaho Hsa

Condition: like new (used), engine power 18.5 kW hydraulic pressing drawer feed hopper height 90 cm + additional 200 cm operating pressure 180 bar control panel operation CE marking Gusdpfeyzm H Tex Ad Hsa year of manufacture 2002

Condition: excellent (used), Year of construction: 2007, Wood Cheaper for sale ! Manufacturer - BRUKS KLOCKNER Model - BK -DH 700X100 L Power - 2x500 kw el. motors Entry - 700x100 mm Number of knives - 6 Weight - 46 tons Equipment consits : Gjdpfx Aeyzfiged Heua - Input transporter 10 m - Metal detector - Cheaper - Output transporter - El. Cabinet - Comand pult

Condition: excellent (used), Catalogue number 7867 TECHNICAL DATA Gedsyy Nm Hspfx Ad Heua - Feed hopper inlet: 1000x1250mm - Rotor working width: 440mm - 4-shaft design - Motor power: 2×7.5kW - Sieve: 20mm - Electric autoreverse - Extraction nozzle diameter: 180mm - Dimensions (LxWxH): 1200x1500x2000mm - Weight: 1192kg FEATURES – German-made – Four-shaft cutting mechanism – Autoreverse – Very good condition – Not repainted – Used shredder Net price: 45,900 PLN Net price: 10,930 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 6114 Guedpfxsyy Nlvs Ad Hja TECHNICAL DATA - Feed hopper inlet: 800x1000 mm - Rotor working width: 800 mm - Pump motor: 0.75 kW - Main motor: 15 kW - Number of knives: 21 pcs - Knife size: 30x30 mm - Screen: 0.8x10 mm - Pressure drawer - Electric auto-reverse - Discharge augers: 2×1.1 kW - Dimensions (L/W/H): 2460x1800x2250 mm - Weight: 1660 kg – German-made – Auto-reverse – Pressure drawer – Not painted – In very good condition – Used shredder Net price: 63,900 PLN Net price: 15,200 EUR depending on the exchange rate, 4.2 EUR (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 6955 TECHNICAL DATA - Feed hopper inlet (L x W): 1070x710 mm - Outlet for chipped wood: Ø 200 mm - Rotor working width: 700 mm - Main motor: 18.5 kW - Pump motor: 1.5 kW - Number of knives: 21 pcs - Knife size: 35x35 mm - Screen: 50 mm - Pressure drawer - Electric auto-reverse - Dimensions (L/W/H): 1700x1300x1640 mm - Weight: 1780 kg ADVANTAGES – German-made – Auto-reverse – Pressure drawer – Very good condition – Used chipper Net price: 67,900 PLN Net price: 16,160 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In the event of major exchange rate fluctuations, the price may change) Gusdsyy Nhdepfx Ad Hsa

Condition: excellent (used), CATALOG NUMBER 7595 Technical data: - Loading hopper inlet: 1400x1400mm - Outlet for shredded wood: diameter 160mm - Rotor working width: 600mm - Main motor: 18.5kW - Pump motor: 0.75kW - Number of knives: 14 pcs - Knife dimension: 40x40mm - V-Rotor - Screen: 10mm - Hydraulic pressure drawer - Electric auto-reverse - Dimensions (L/W/H): 1810x1210x2120mm - Weight: 1220kg ADVANTAGES – Made in Germany – V-Rotor – Technical documentation (DTR) – Hydraulic pressure drawer – Auto-reverse – Used chipper in very good condition Gujdpfx Adjyyydpo Hea Net price: 39,900 PLN Net price: 9,500 EUR (based on exchange rate 4.2 EUR) (Prices may change subject to significant fluctuations)

Condition: used, Year of construction: 2019, functionality: fully functional, overall weight: 5,500 kg, fuel type: electric, – Manufactured in Poland – Year of manufacture: 2019 – Vibratory feeder TECHNICAL SPECIFICATIONS: – Inlet width: 650 mm – Inlet height: 250 mm – Shaft diameter: 600 mm – Shaft width: 650 mm – Main motor: 110 kW – Number of knives: 2 pcs. – Knife length: 650 mm – 4 lower driven toothed shafts – Lower shafts motor: 4 kW – 3 upper driven toothed shafts – Upper shafts motor: 4 kW – Vibratory feeder length: 5000 mm – Vibratory feeder width: 620 mm Guedpfjyw Sqiox Ad Hea – Vibratory feeder motor power: 4 kW – Feed forward / reverse – Screen: 100 x 80 mm – Hydraulic lifting of shafts and cover – Hydraulic pump motor power: 1.1 kW – Transport dimensions (L/W/H): 820 / 180 / 190 cm – Weight: ~5400 kg

Condition: new, Year of construction: 2026, CORMAK RPL380 Firewood Processor (Saw–Splitter Machine) Key features and functions: Performance: Efficient operation with capacity of up to 8 m³ of wood per hour, depending on wood type. Multifunctionality: Combines a chainsaw, log splitter, and conveyor belt in one machine, increasing efficiency and saving time. Versatility: Suitable for both professionals and individual users; capable of processing various types of wood. Engine: 15 HP petrol engine delivers high power for efficient cutting and splitting. Time-saving: Wood processing time is significantly reduced thanks to the integration of three functions in one unit. Reliability: Designed for use in sawmills, the wood industry, and for firewood or construction wood production. Equipment: Features a STIHL chainsaw guide bar and an oil tank located at the rear of the housing. Precision: Cross wedge enables effective splitting, while cutting can be performed to the desired length. Adjustment: Wedge height can be easily adjusted to match log diameter using a lever. Safety: Built-in safety systems protect the operator. Mobility: Equipped with wheels and a tow hitch for easy transport between work sites. Conveyor system: The belt feeds wood into the splitter and then carries away split logs. It can be folded in half and positioned vertically. Certifications: CE certified and supplied with full technical documentation (DTR). Powerful 24L hydraulic system drives: ✅ Feed conveyor ✅ Cutting saw ✅ Splitting cylinder with up to 20 tons of force ✅ Output conveyor The machine is equipped with a 9-stage adjustable splitting wedge, allowing logs of different diameters to be split into 2 or 4 pieces. ✅ Adjustable cutting length ✅ Log holding clamp ✅ Central chain lubrication system Technical Specifications Engine Model: Lancin G420F Power: 9.0 kW (15 HP) Displacement: 420 cc Fuel: Petrol Fuel tank capacity: 5.4 L Starting system: Electric / manual (recoil) Recommended engine oil: 15W40 (1.7 L) Hydraulic System Hydraulic oil tank capacity: 24 L Recommended hydraulic oil: HL46 / HL32 Performance & Cutting Parameters Max splitting force: 20 t Splitting wedge: 4-way Max log diameter: 380 mm Min / max cutting length: 190–600 mm Guedpfxsyw I Epj Ad Hja Chainsaw bar length: 18” (45 cm) Capacity: approx. 8 m³/h Feed Conveyor Length / height: 1000 mm / 910 mm Dimensions (L × W): 1040 × 254 mm Max incline angle: 40° Output Conveyor Dimensions (L × W): 3200 × 254 mm Speed: 27 m/min Wheels & Tires Size: 135/70R12 Pressure: 2.5 bar Dimensions & Weight Machine dimensions: 6600 × 1380 × 2000 mm Weight: 680 kg

Condition: ready for operation (used), TECHNICAL SPECIFICATIONS: FOR SHREDDING WOOD WASTE SHAFT WIDTH: 800 MM SHAFT DIAMETER: 300 MM NUMBER OF KNIVES: 18 KNIFE DIMENSIONS: 30/30 MM HOPPER: 1000X800X900 MM SCREEN DIAMETER: 15 MM DISCHARGE DIAMETER: 200 MM EMERGENCY STOP SWITCH POWER SUPPLY: 400 V MOTOR POWER: 22 KW OVERALL DIMENSIONS: LENGTH: 2000 MM WIDTH: 1600 MM Gusdoyw I Ahepfx Ad Hea HEIGHT: 1800 MM

Condition: like new (used), engine power 18.5 kW feed hopper press drawer 2 cm screen Guodpfx Ajyw Hxzjd Hea year 2011 380 V

Condition: good (used), functionality: fully functional, DRUM CHIPPER BRUKS 602 CS opening size: 540 x 300 mm Drum diameter 600 mm Motor 26 kwh Capacity 20 m3 of chips/hour. Gusdpfx Adeywgfuo Hsa Good condition

Condition: excellent (used), CATALOGUE NO. 7922 TECHNICAL DATA - Feed hopper inlet: 800x600mm - Outlet for processed wood: diameter 160mm - Rotor working width: 590mm - Main motor: 18.5kW - Number of knives: 14 pcs - Knife dimension: 30x30mm - Screen: 15mm - Pressing drawer - Electric auto-reverse - Dimensions (L/W/H): 1800x1300x1650mm - Weight: 1044kg ADVANTAGES – German-made – DTR documentation – Pressing drawer – Auto-reverse – Used wood chipper, very good condition Gsdpfx Adsyvimxe Hjua Net price: 36,900 PLN Net price: 8,790 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (In case of larger exchange rate fluctuations, the price may change)