LV Trading BV

Condition: used, Sunnen brand honing machine, model MBB 1400 EMS. Rjdpfoza Hd Isx Ammsu

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, GMP QTOPIC-380 F Hot laminator for single-sided lamination, year of manufacture 2022 Working width 380 mm. Chrome roller 100 mm Ø. Thermal lamination up to 10 m/min. Single-sided lamination with de-curling device for perfectly flat sheets. Automatic sheet overlap for consistent results, independent of the operator. Rodpfxsza Hdzs Ammou Working width 380 mm Films 25 - 44 microns, 58/77 core Paper thickness 120 g/m² ~ 350 g/m² Speed up to 10 m/min Heating time 5 minutes Pressure roller pneumatic Connection values 230 V, 2.8 kW Dimensions H x W x D in mm 1350 x 1700 x 720 Separation also possible for nylon films, pneumatic roller pressure with automatic stop at the end of the stack, including compressor. Sleeking (printing enhancement). Use of embossing rollers possible.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total length: 43,000 mm, total width: 4,000 mm, total height: 2,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec insulating glass line 4500 x 2000 mm, year 1989/2007, consisting of following machines: Rodpfx Aoza Hckjmmou - AKL-20V, edge grinding machine - RTVN-27/20WE, washing machine inlet conveyor - RTL-20B, washing machine with 6 brushes for low-e, including a sand filter and a hot water tank as well as a blower - RSV-38/20, frame set section - PSL-35/20V, assembling station - RTVN-16/20MZU2, measuring section for gas filling press - FPS-35/20U2B, gas filling press for Argon, can do assembling of 4,5 m long units, gas filling up to 3500 mm length - RTVN-11/20, outlet conveyor of gas filling press - UKL-35/23VA, tilt table for line discharge of 90° - KFL-35/22, horizontal glass conveyor - RTVN-16/20VFE, short inlet of sealing robot, including measuring device for glass and frame - VL-1N/20, sealing robot, including option for triple units - DOS-1PU, dosing and metering station, modified to PS - VLA-25/20, extension of sealing robot The machine is in very good condition and will be available by the end of June 2026.

Year of construction: 2007, condition: used, Extraction system for chips, granules, and dust. Redpfx Aoza Ha Aemmju

Condition: ready for operation (used), Year of construction: 2020, operating hours: 4,726 h, spindle speed (max.): 15,000 rpm, travel distance X-axis: 900 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle motor power: 51,000 W, table load: 500 kg, number of slots in tool magazine: 90, number of axes: 5, This 5-axis Quaser UX630 was manufactured in 2020. It features a powerful HSTec HM-15A spindle with a speed of 15,000 rpm and a robust rotary/tilt table capable of handling workpieces up to Ø630 × 540 mm. The machine is equipped with a 90-position tool magazine and includes advanced options like a Renishaw 3D workpiece probe. If you are looking to get high-quality machining capabilities, consider the Quaser UX630 universal machining centre we have for sale. Contact us for further details. • 5-axis simultaneous machining; B-axis ±120°, C-axis 360° continuous • Spindle: HSTec HM-15A built-in, HSK-A63, 162 Nm • Rotary/tilt table: Peiseler (Germany), Direct Drive, Ø480 mm; max load 500 kg; max workpiece Ø630 × 540 mm • Control: Heidenhain TNC 640 with options DCM, Kinematics Opt, LAC, DNC (Opt. 18) • Tool magazine: 90 positions (HSK-A63) • Through-spindle coolant: 20 bar Rodpfx Amoza E U Ssmeu • Heidenhain linear scales on all axes • Spindle operating hours: 4,726 • Note: Dust extractor shown in images is excluded Additional equipment • Renishaw 3D workpiece probe • Blum laser tool measurement • Schunk Vero-S zero-point clamping system • NP clamping system • BMO robot interface installed and programmed (robot not included) • HSK63 tooling included

Condition: used, Year of construction: 1995, functionality: fully functional, OMGA T720 bandsaw Specifications: • Technical condition – used, after professional inspection • Manufacturer – OMGA • Model – T720 • Working width – 250 mm • Working height – 80 mm • Motor power – 2.2 kW • Right table – roller table, 200 cm long • Left table – conveyor belt, 260 cm long • Table width – 29 cm • Pneumatic stops for cutting to a specified length – 2 pcs, controlled from the machine’s control panel • Adjustable cutting speed • Max. blade diameter – 350 mm • Spindle – 30 mm • Dust extraction port – 100 mm • Body weight – 210 kg • Overall dimensions – 510 x 110 x 155 cm (L x W x H) • Body dimensions – 90 x 110 x 155 cm (L x W x H) Additional information: Rodpfx Amsza E Uxemsu • The machine is in good technical condition and ready for immediate use • The photos show the actual condition of the item for sale • Possibility to power on and test the machine on site • Free training on machine operation (at the company’s premises) • The price stated in the auction does not include VAT and transport costs Financing and transport: • We arrange transport using the MDD fleet, courier companies, or external carriers • We offer financial support in the form of leasing or a leasing loan

Condition: used, mileage: 127,000 km, power: 184 kW (250.17 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,680 mm, loading space width: 2,480 mm, loading space height: 2,800 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, spoiler, tail-lift, Year of manufacture: 2019 Front axle: Steering; Tyre profile left: 25%; Tyre profile right: 25% Rear axle: Double wheels; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Empty weight: 7.387 kg Carrying capacity: 4.603 kg GVW: 11.990 kg Tail lift: DHollandia, 2000 kg Rjdoza E Ulspfx Ammsu Registration number: BB-415-V = Additional options and accessories = - Camera system - Outside temperature display - Rear air suspension - Roof spoiler

Condition: used, mileage: 476,846 km, power: 353 kW (479.95 HP), first registration: 03/2023, fuel type: diesel, tire size: 315/70 R22.5, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2023, Equipment: ABS, central locking, cruise control, electric window regulation, fridge, parking heater, power mirror, second fuel tank, soot filter, spoiler, = Additional options and accessories = - Roof spoiler - Aluminum fuel tank - Particulate filter - Headlights Rodpfx Amsza E T Ujmsu - Side sills - Standard air conditioning - Alternating current - Toolbox - Central lubrication system = Further information = Tire size: 315/70 R22.5 Brakes: Disc brakes Front axle: Steered; Tire tread depth left: 15 mm; Tire tread depth right: 15 mm; Suspension: Leaf spring suspension Rear axle: Double tires; Tire tread depth left inner: 20 mm; Tire tread depth left outer: 20 mm; Tire tread depth right inner: 20 mm; Tire tread depth right outer: 20 mm; Suspension: Air suspension Damage: None

Condition: used, mileage: 1,234,867 km, power: 324 kW (440.52 HP), first registration: 09/2014, tire size: 385/55 R22.5, axle configuration: 4x2, brakes: retarder, color: other, driver cabin: sleeper cab, emission class: euro6, suspension: steel-air, Year of construction: 2014, Equipment: ABS, central locking, cruise control, electric window regulation, fridge, parking heater, power mirror, retarder, spoiler, = Additional options and accessories = - CD player - Roof spoiler - Spare key - Speed limiter - Aluminum fuel tank - Engine brake - Auxiliary drive - Headlights - Stability control - Standard air conditioning - Sun visor - Alternating current - Toolbox - Xenon headlights = Further information = Axle brand: Anders Brakes: Disc brakes Front axle: Tire size: 385/55 R22.5; Steered; Tire tread depth left: 13 mm; Tire tread depth right: 14 mm; Suspension: Leaf spring suspension Rear axle: Tire size: 315/70 R22.5; Dual tires; Tire tread depth left (inside): 13 mm; Tire tread depth left (outside): 15 mm; Tire tread depth right (inside): 16 mm; Tire tread depth right (outside): 15 mm; Suspension: Air suspension Redsza E T Iopfx Ammju Unladen weight: 7,960 kg Payload: 11,040 kg GVWR: 19,000 kg Damage: None

Condition: used, axle configuration: 3 axles, first registration: 03/2021, suspension: air, tire size: 385/65, tire condition: 40 %, color: other, Year of construction: 2021, Equipment: ABS, = Additional options and accessories = Rodpfx Ajza E Tujmmju - Air Suspension - Disc brakes - Steering Axle = More information = Tyre size: 385/65 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Tyre profile: 40% Rear axle 2: Steering; Tyre profile: 31% Rear axle 3: Steering; Tyre profile: 30%

Condition: good (used), mileage: 283,000 km, power: 355 kW (482.67 HP), first registration: 08/2019, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: retarder, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: EBS, air conditioning, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, retarder, trailer coupling, = Additional options and accessories = - Enclosed cab - Cab - Air conditioning - Air-suspended seats - Radio/CD player - Rotating beacon - Sun visor - Auxiliary heating system - Toolbox - Power take-off (PTO) = Additional information = Front axle: Steerable Rear axle 1: Lift axle; Steerable Unladen weight: 16,220 kg Payload: 15,780 kg Redpfoza E Tnjx Ammju GVW: 32,000 kg CE marking: yes Technical condition: good Visual condition: good

Condition: used, mileage: 84,550 km, power: 425 kW (577.84 HP), first registration: 12/2024, fuel type: diesel, empty load weight: 12,950 kg, overall weight: 26,000 kg, tire size: 385/65 R22,5 - 315/80 R22,5, axle configuration: 6x4, wheelbase: 3,600 mm, next inspection (TÜV): 12/2026, fuel: diesel, energy efficiency: E, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 12 m³, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Equipment: ABS, AdBlue, EBS, additional headlights, cruise control, differential lock, electronic stability program (ESP), navigation system, parking air conditioner, parking heater, retarder, traction control, trailer coupling, Urea tank (AdBlue) Engine displacement: 15,569 cc 50 mm trailer coupling Hydraulics (auxiliary drive) Low noise Light alloy rims Distance warning system Rodpjza E S Rjfx Ammeu Lane keeping assist Euro 6 E Payload: 13,050 kg Automatic climate control Turbo retarder coupling Sun visor Air horns Refrigerator LED lighting Air-suspended cab Foldable underrun protection 1 bed Tie-down rings Total permissible weight: 68,000 kg Trailer load: 55,000 kg VIN: 10795323 Errors and omissions excepted.

Year of construction: 2008, condition: ready for operation (used), X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible. Rsdpfeza E S Dsx Ammou

Condition: ready for operation (used), Centre height: 350mm, turning diameter: 700mm, spindle bore: 108mm, spindle speed: 13-1,000rpm. An on-site inspection is possible. Rjdpeza E Swefx Ammou

Year of construction: 1999, condition: ready for operation (used), Fresh oil lubrication capacity: approx. 3l, voltage: 400V, frequency: 50Hz, fuse protection (slow-blow) according to VDE 0100: 80A, permissible voltage fluctuation at 400V: ±10%, connected load: 44kVA, length: 3210mm, width: 1750mm, height: 1750mm, weight: approx. 4.6t, with chip conveyor. An on-site inspection is possible. Redpoza E Sqefx Ammju

Condition: ready for operation (used), Year of construction: 2018, Motor power: 15kW, AC, max. air flow rate: 21,000m³/h, max. vacuum pressure: 1900Pa, dust container capacity: 200l, disposal drum Hobbock discharge: 2x35l, weight: 1590kg, colour: RAL5012 front / RAL9006, first filtration stage main filter, cartridge filter area: 222m², W3 nanocoated cartridge filter area: 151.8m², bag filter area: 24.8m², number of cartridge filters: 6, number of bag filters: 4, cartridge dust class according to DIN EN 60335-2-69: M, separation efficiency greater than 99.6%, second filtration stage filter area: 65m², filter area: 8m², length: 1756mm, width: 2066mm, air inlet into housing: from the top, side panels: high-tech polycarbonate, with documentation. An on-site inspection is possible. Rodpfxsza E Skj Ammju

Year of construction: 2016, condition: ready for operation (used), Operator side: left, workpiece thickness: 1-150mm, constant working height: 860mm, feed speed infinitely variable via frequency inverter: 1-4m/min, upper section paint finish: telegrey RAL 7074, lower section paint finish: gentian blue RAL 5010, sanding roller Shore hardness: A20, max. workpiece weight: 300kg, thickness and tolerance compensation: ±1mm, max. workpiece distortion over the entire workpiece length: 6mm, noise level approx.: 85dBA, mains voltage: 3/PEN AC 400V ±10%, alternatively: 3/PEN AC 480V, phase sequence: clockwise rotating L1-L2-L3, protective measure: TN-C system with PEN conductor according to VDE 0100 T310, control voltage: DC 24V, compressed air connection: 6bar ±10%, clean, oil-free, dried air. Equipment: CE marking, electrical operating elements in the control panel, safety flap at the infeed, electromechanical workpiece thickness adjustment, automatic conveyor belt control, air gauge, fault diagnosis system, electrical cabinet, design in accordance with accident prevention regulations, potential-free interface for controlling a dust extraction unit, dust collection container and cleaning brush for the conveyor belt at the outfeed, including documentation. An on-site inspection is possible. Rjdpfxjza E Sdj Ammju

Year of construction: 2021, condition: ready for operation (used), Max. working area: 3048x1524mm, max. workpiece weight: 900kg, max. positioning speed: 100m/min, max. acceleration: 1.0G, positioning accuracy: 0.05mm, repeat positioning accuracy: 0.03mm, screen size: 21.5 inches, max. laser power: 4kW, max. sheet thickness carbon steel: 20mm, max. sheet thickness stainless steel: 12mm, max. sheet thickness aluminium: 10mm, max. sheet thickness brass: 6mm, laser source: MAX, laser head: Bodor Genius, software: Bodor Pro 2.0, length: 4960mm, width: 2280mm, height: 2200mm, weight: 7.5t. Equipment: heavy-duty machine bed made of spheroidal graphite cast iron, aluminium crossbeam, 4kW MAX laser source, Bodor Genius laser cutting head with autofocus, Bodor Pro control system, 21.5-inch touchscreen monitor, Yaskawa servo motors and drives from Japan, SMC oxygen control valve from Japan, SMC nitrogen control valve from Japan, active crash protection function, automatic lubrication system, Wi-Fi control, automatic pressure regulation for oxygen and nitrogen, Schneider Electric relays, automatic shutdown when the door is opened, laser fault alarm, chiller fault alarm, cutting fault alarm function, cutting gas low-pressure alarm function, laser safety glasses for the operator, water chiller, with complete system documentation, operating manual and electrical diagrams, extraction system, spare laser head, laser source, wear parts and accessories, valid CE declaration of conformity. An on-site inspection is possible. Rodpoza E R Tsfx Ammsu

Condition: ready for operation (used), Year of construction: 2001, X-axis: 700mm, y-axis: 500mm, z-axis: 600mm, table dimensions: 510x1020mm, max. spindle speed: 10,000rpm, milling feed rate: 11.4m/min, rapid traverse rate: 24m/min, tool changer: 24-position, tool holder: SK40-A DIN 69872, connected load: 25kVA, control: Hurco Ultimax, software version: 2.32, coolant tank capacity: 120l, accessories available if required: milling tool holders, tool cabinet, workbench, and numerous additional items. The home position of the tool changer requires adjustment. An on-site inspection is possible. Rjdpfxoza E R He Ammsu

Condition: ready for operation (used), Year of construction: 2003, X-axis: 1600mm, y-axis: 900mm, z-axis: 760mm, connected load: 38kVA, control: Ultimax, operating hours: approx. 50,000h, with CTS (coolant through spindle), Knoll AE 1058 coolant filtration and processing system. An on-site inspection is possible. Rodpfx Asza E Ryjmmeu

Condition: ready for operation (used), Number of axes: 3, operating hours: unknown, with control system, belt filter, and extraction unit, without documentation or spare parts, not maintained on a regular basis, without maintenance records. An on-site inspection is possible. Redpfx Amsza E Rtomou

Condition: ready for operation (used), Year of construction: 1996, Clamping force: 3150kN, opening force: 10,000daN, closing stroke: 500mm, ejector force/retraction force: 159/82kN, ejector stroke: 120mm, mould height: 300-700mm, platen dimensions: 900x900mm, tie bar spacing: 550x550mm, tie bar diameter: 110mm, injection position: mm, max. injection force: 350kN, injection stroke: 430mm, injection plunger diameter: 50/60/70/80mm, shot volume: 563/811/1103/1441cm³, specific injection pressure: 1783/1238/909/696daN/cm², corresponding projected area: 177/254/347/453cm², max. projected area: 1050cm² at 300daN/cm², operating pressure: 140bar, dry cycle time (DIN 24480): 500, drive motor: 22kW, control: Datacontrol, length: 6900mm, width: 2000mm, height: 2800mm, weight: 14t, operating hours: 77,185h, shot count: at least 1,147,108, however not guaranteed due to a hardware replacement, adjustable opening stroke, with Striko Westofen W455 holding furnace, ABB IRB 2400 (M96/F10) industrial robot, and documentation. An on-site inspection is possible. Rjdpoza E Rmefx Ammeu

Condition: ready for operation (used), Year of construction: 2007, Lifting height: 4330mm, max. load capacity: 4t, load center distance c: 500mm, load distance x: 525mm, wheelbase y: 2021mm, axle load with load front/rear: 9296/1181kg, axle load without load front/rear: 3268/3209kg, tyres: super elastic (SE), front tyre size: 250-15, rear tyre size: 21x8-9 (SC15), front track width: 1030mm, rear track width: 920mm, mast tilt forward/backward: 3°/9°, mast height lowered: 2400mm, free lift h2: 160mm, mast height extended: 4187mm, overhead guard height h6: 2322mm, seat height h7: 1251mm, coupling height h10: 546/421mm, overall length l1: 3886mm, length including fork carriage l2: 2886mm, overall width b1: 1256mm, ground clearance at wheelbase center m2: 147mm, aisle width with pallet 1000x1200 crosswise Ast: 4208mm, aisle width with pallet 800x1200 lengthwise Ast: 4408mm, turning radius Wa: 2483mm, minimum pivot point distance b13: 629mm, travel speed with/without load: 19/20km/h, lifting speed with/without load: 0.30/0.46m/s, lowering speed with/without load: 0.55/0.46m/s, drawbar pull with/without load: 3770/4390kg, max. drawbar pull with/without load: 15,940/16,140kg, travel motor power K60 min: 15kW, lift motor power at 15% duty cycle: 25kW, battery: 80V 5PzS840, battery voltage: 80V, battery capacity: 840Ah, battery weight: 2178kg, drive control system: RX60-40, operating pressure for attachments: 250bar, oil flow for attachments: 30l/min, quick fork/FEM carriage for attachments: pin-mounted, dead weight: 6477kg, operating hours: 5700h, with documentation. The left wheel gearbox is defective, otherwise fully functional. UVV inspection and maintenance were last carried out in May 2025. The inverters were replaced 2 years ago. An on-site inspection is possible. Rjdjza E Rgspfx Ammsu

Condition: excellent (used), Year of construction: 2019, REF: MM6442 Rjdpjza E N Njfx Ammeu Zhangjiagang Angel Beverage Machinery Co. Ltd (Chinese) aluminium can seaming machine for 200mm diameter cans. Model - FXZ-1. Serial no. - Angel201906. Date of manufacture - 2019. Speed - 1000 cans/h. 82mm wide belt. Overall dimensions - 3000mm L x 1040mm W x 2000mm H. Condition - Good, Trial works only.  CE marked/approved.

Condition: used, Year of construction: 2022, operating hours: 4,456 h, 2022 | Hyundai HX520AL | Used Tracked Excavator | 4456 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 172400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 59 inspection points 55 approved ✅ 3 imperfect ℹ️ 1 issues ⚠️ Rsdpfxoza E N Aj Ammsu 📌 Inspector's Comment: THE PRICE OF THE MACHINE IS SOLD WITHOUT HAMMER, WITHOUT BUCKET AND WITHOUT OILQUICK QUICK CHANGE. THE OILQUICK SYSTEM AND A BUCKET ARE AVAILABLE AT EXTRA COST. THE SHEAR IS NOT FOR SALE. The machine is in good condition and fully operational. There is a minor cosmetic damage on one corner. The machine was inspected about 1,000 hours of service prior. No new flaws were detected; however, the hydraulic oil is low. Notably, the machine has been serviced and the slew ring and bucket have no significant play. These areas should remain a focus of ongoing preventative maintenance. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40825 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.