Garbe Feinwerktechnik

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, control type: CNC control, actuation type: electric, controller manufacturer: Lenze, bending force (max.): 35 t, working width: 1,275 mm, stroke length: 300 mm, throat depth: 1,000 mm, distance between stands: 1,350 mm, installation height: 1,000 mm, operating speed: 110 mm/s, number of axes: 7, table height: 1,000 mm, back gauge adjustment: CNC-controlled, back gauge speed R-axis: 200 mm/s, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 3,900 kg, total length: 2,250 mm, total width: 1,820 mm, total height: 2,650 mm, input voltage: 400 V, input frequency: 50 Hz, warranty duration: 6 months, pressing force: 35 t, Equipment: CE marking, documentation/manual, foot remote control, safety light barrier, SAFANDARLEY E-Brake press brakes are equipped with an electric drive. Lenze servomotors controlled by inverters from the same manufacturer ensure fast and reliable system performance for many operating hours. Additionally, the machine only consumes electrical energy during the downward stroke of the ram. The return stroke is achieved via the force generated by springs. The machine does not consume electricity when idle, as the system does not include a pump, unlike hydraulic press brakes. We estimate energy consumption to be 50% lower than that of conventional hydraulic presses. SAFANDARLEY E-Brake servo-electric press brake: - Press force: 350 kN (35 tonnes) - Ram stroke: 300 mm - Opening: Q=690 mm - Upper beam approach speed: 110 mm/s - Upper beam accuracy: +/- 0.01 mm - Max backgauge finger speed: 350 mm/s - Max backgauge finger reach (third reference point X-axis reach): 1000 mm - Backgauge travel range (R axis): 150 mm - Connected load: 11 kW - Weight: 3,900 kg - Machine width: 2,200 mm - Machine depth: 1,820 mm - Machine height: 2,510 mm - Power supply: 3/N/PE 50Hz – 400/230V - Servo-electric drive (without hydraulic system) - Belt-driven power transmission - CNC-controlled axes: Y1-Y2-X-deltaX-R-Z1-Z2 - WILA hydraulic upper clamp - Safan OBS-3 lower clamp Gbedpfx Afsxl Tfnopsu - E-Bend S sheet thickness measurement system with depth correction

Condition: defective spare-parts repository (used), functionality: unexamined, Year of construction: 1983, machine/vehicle number: K2062, control type: CNC control, working width: 4,000 mm, overall weight: 7,500 kg, power: 7.5 kW (10.20 HP), input voltage: 380 V, input current: 16 A, input frequency: 50 Hz, Equipment: lower tooling, upper tooling, We are selling our Safan CNCB 110-4300 press brake from 1983. The machine comes with two tooling sets and extensive documentation. A few months ago, the hydraulic pump failed, but we were able to procure brand-new replacement parts, including the cartridge. The machine is now reassembled, can be switched on, and is filled with oil. At present, there appears to be a minor issue with the oil pump or the pump's check valve. When the pump is started, the circuit breaker trips due to overload. This seems to be only a minor fault. The machine is being sold as defective and without any warranty. Please note the machine weighs 7.5 t for collection. The tooling is segmented and features a Promecam-style clamp. Gsdoxl D Dbopfx Afpobu We can assist with loading using our own crane. Transport arrangements, including a low-loader due to the height, are the buyer's responsibility.

Condition: used, functionality: fully functional, INDUMAC FOLDING MACHINE 4000 X 100 TON WITH REGISTER Gbjdoxltgxepfx Afpju USED MACHINE INTERNAL CODE: SVR 290

Condition: used, functionality: fully functional, Bariola press brake 3050 x 100 ton CNC ESA Model PBI 100/30NCS Distance between uprights: 2600 mm Stroke: 150 mm Weight: 7000 kg With compensation table Used machine Internal code: SVR 360 Godpfx Asxlr Uhjfpobu

Condition: ready for operation (used), Year of construction: 1999, Immediately available ex location: Hydraulic CNC press brake Beyeler Type PR 10, 400KN x 7200 Year of manufacture 1999 CNC control CNC 900 Bending length 7200 mm Gjdexlfaqjpfx Afpjbu Distance between uprights 6500 mm Press force 400 t Distance table – ram 500 mm Stroke 365 mm Drive 37 kW Weight 52 t 4 sets of tooling At a price of EUR 49,000.— plus VAT, ex location

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 13,800 h, AMADA ASTRO II 100 NT bending cell Automatic bending/folding cell - press brake with bending robot Manufacturer: AMADA Type: ASTRO 100 NT Year of construction: 2007 Condition: used Control: AMNC II PC Switch-on hours: 38536h Automatic operation: 13739h Gbsdpexgbmcjfx Afpeu Pressing force: 100 tons bending length: 3000 mm Tool clamping: AMADA, standard Clearance between uprights: 2700 mm Projection: 415 mm Stroke: 200 mm Installation height: 500 mm Adjustment range backgauge: 600 mm Width of the work table: 60 mm

Condition: like new (used), functionality: fully functional, control type: CNC control, LVD BENDER 3000 X 110 Gbsdpfexf H Rqex Afpou CYBELEC CNC 3 AXES MOTORIZED REGISTER USED MACHINE INTERNAL CODE: SVR 249

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: HFE 3i 1003 L | 101075, control type: CNC control, Condition and details, see pictures. The machine is currently being sold without tools. Gbjdpjxfg U Nefx Afpeu

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, actuation type: hydraulic, pressing force: 60 t, Equipment: CE marking, documentation/manual, Bending force 60 tonnes Bending length 2050 mm Clearance between the uprights 1700 mm Gbedpfoxfgqdsx Afpou Stroke: 265 mm Table height 900 mm Machine width: 3200 mm Machine depth: 1800 mm Height: 2900 mm Weight 5600 kg Very well-maintained condition

Condition: refurbished (used), functionality: fully functional, Shear Brand: AMADA PROMECAM Model: GP1230 Capacity: 3000 x 12 Back gauge: 1000 mm Rear pneumatic sheet support Gbedpfexfbb Rsx Afpju Cylinder seals replaced – Blades sharpened – In compliance

Condition: good (used), Year of construction: 1998, In good technical condition. Cutting length: 3,000 mm, max. capacity: 6 mm. Year of manufacture: 1998, weight: 5,500 kg, including new double-sided blades. Gedsxd Tcdopfx Afpsbu

Condition: used, Year of construction: 1980, pressure 50 t Gbsdpfxjxddqxo Afpeu chamfer lenght 2500 mm distance between columns 2050 mm table width 140 mm table height 750 mm total power requirement 8 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 3, x 1,2 x 2,6 m Equipment: • manual back stop • upper and lower tools • 2 manual operation / foot switch

Condition: used, Year of construction: 1980, pressure 50 t chamfer lenght 2500 mm Gbjdpfxoxc Nwzs Afpeu distance between columns 2050 mm throat 200 mm table width 140 mm table height 750 mm distance table - lower edge of ram 300 mm max. ram stroke 100 mm closing speed 9 - 160 mm/sec return speed 55 mm/sec voltage 380 V / 50 Hz engine output 4,1 kW total power requirement 5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 3, x 1,2 x 2,6 m Equipment: • manuel back stop • upper and lower tools Split , lower tool 2000 mm long • 2 manual operation / foot switch

Condition: used, functionality: fully functional, Year of construction: 1986, bending force (max.): 110 t, working width: 3,100 mm, back gauge adjustment: CNC-controlled, overall weight: 7,600 kg, power: 7.5 kW (10.20 HP), Equipment: foot remote control, lower tooling, upper tooling, Safan CNCS 110-3100 Year of manufacture: 1986 Weight approx. 7,600 kg Bending angle is set via length measurement, not via pressure The system automatically calculates the angle Sequence storage via program numbers Automatic back gauge with 2 fingers Retraction for Z-bending is adjustable Bending speeds can be set Godpfx Aexbh R Rofpjbu Includes upper tool and die as per photos

Condition: new, pressure 100 t chamfer lenght 2600 mm distance between columns 2200 mm column arm 410 mm ram stroke speed 200 mm/sec work speed 9.5 mm/sec return speed 155 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm oil volume 150 ltr. voltage 400 Volt total power requirement 7.5 kW weight 6850 kg range L-W-H 3750 x 1950 x 2800 mm ----- Press brake with special equipment Godpfx Afjxaaqyspjbu * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: like new (used), functionality: fully functional, Year of construction: 2022, control type: CNC control, degree of automation: automatic, actuation type: electric, bending force (max.): 80 t, working width: 2,500 mm, input voltage: 380 V, Equipment: foot remote control, safety light barrier, Well-equipped machine with touchscreen CNC control Gbodpjw Ulq Nofx Afpju

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, ITALMACCHINE hydraulic press brake Year of manufacture: 2000 CE CNC control: ESA S 530 Controlled axes: 4 (Y1-Y2-X-R) Bending length: 3050 mm Pressing force: 100 tons No. 4 rear stop reference fingers Tool clamping: Promecam type Gbedpfx Afjw T Thtjpsu Safety barriers Weight: 7200 kg Motor power: 7.5 kW.

Condition: used, Year of construction: 2006, pressure 100 t chamfer lenght 3100 mm distance between columns 2550 mm column arm 400 mm table height 925 mm stroke 200 mm control Cybelec DNC 8805 output 11 kw Gbedpfx Afew Rf Hiopeu total connected load 15 kW weight of the machine ca. 9,0 t range L-W-H 5,2 x 2,1 x 2,9 m Used CNC- press brake - some upper tooling (no lover tooling) - Infrared security device - documentation - hydraulic Crowning - 2 axis backgauge X + R

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, actuation type: hydraulic, controller model: CYBELEC DNC 880S, bending force (max.): 100 t, working width: 2,050 mm, overall weight: 8,000 kg, No reserve price – guaranteed sale to the highest bidder! Godpow Rcndjfx Afpebu TECHNICAL DETAILS Pressing force: 100 t Bending length: 2,050 mm MACHINE DETAILS Control: CYBELEC DNC 880S Dimensions & Weight Dimensions: 2,650 x 2,600 x 2,700 mm Weight: 8,000 kg EQUIPMENT Controlled axes: Y1, Y2, X, R, Z1, Z2, X1 Hydraulic Wila clamping (top) Motorized crowning

Condition: good (used), functionality: fully functional, Year of construction: 2013, Year of production: 2013 CNC Control: AB PAD touchscreen interface Axes Controlled: Y1, Y2, X1, X2, R1, R2, Z1, Z2 Bending Length: 3110 mm Distance Between Uprights: 2705 mm Throat Depth: 420 mm Gsdsw Ngufepfx Afpebu Stroke: 200 mm Open Height: 470 mm Automatic Table Bend Compensation Remote Diagnostics & USB/Internet Updates Interactive Programming: 2D workpiece input, automatic program generation Tool Holders: S-GRIP quick-release system Tooling Compatibility: Amada standard

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 2,600 h, control type: CNC control, controller model: Fanuc 32 C, Equipment: documentation/manual, Standard programs such as parameter settings Dressing settings Speed settings Program management settings Limitation of travel distances x + y Basic parameter settings Grinding wheel management program Warming-up cycle program Surface plunge grinding program Measuring program 15 kVA transformer Full enclosure Meister G3 Spindle upgrade to 3.7 kW, disc 225 mm ETHER interface for network connection Control module with extended memory Fanuc Macro B option Program creation for batch programs Programmable spindle speed WinWop program for contour creation (Windows) WINWop program for error compensation WinWop postprocessor CGS Complete Grinding Solutions software Option Dressing Swiveling profile dressing device Diamond dressing wheel Pre-dressing device VPA 100 L Diamond wheel 100 mm for pre-dressing device Regrinding package diamond wheel G3 / W Option – Clamping and Balancing Magnetic chuck 400 x 200 400 mm stop bar with prism Fully automatic balancing device, size 1 Grinding wheel flange for G3, bore 51 mm Option Filter Systems Belt filter system 175 l Extraction unit for emulsion mist 500 Godpfew I Tt Sex Afpebu Inquiries only from Europe, preferably the EU.

Condition: good (used), Pressure 110 Ton Edge length 3100 mm Year of construction 1990+ retrofit Gbsdow Hx Rzepfx Afpju Stand width 2600 mm Steered axles Y1,Y2,X axis Control Esa S630 control Including Wila Sealing stamp

Condition: used, Year of construction: 1973, pressure 110 t chamfer lenght 3100 mm distance between columns 2600 mm stroke 150 mm dayligth 350 mm work height max. 900 mm total power requirement 22 kW Gbodpfx Aew A An Nofpou weight of the machine ca. 7700 kg dimensions of the machine ca. 3550 x 1800 x 2600 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, Pr4 100/3100 Make: Edwards Pearson Model: PR4 100/3100 Gbjdsw Aw Svjpfx Afpju MULTI- AXIS Year / new: 1996 Total axis: 6 – 4axis back gauge X R Z1 Z2 Capacity / bed size / tonnage: 3metre x 3100mm x 100ton Cnc control: Cybelec DNC 80 Cnc control Max closing speed 200mm Can be viewed under power

Condition: used, functionality: unexamined, Year of construction: 1999, machine/vehicle number: 26579, control type: PLC-controlled, bending force (max.): 110 t, working width: 3,050 mm, pressing force: 110 t, working length: 3,050 mm, Used press brake 110 tons 3 meters 6 axes Technical specifications Voltage: 400 V Model: PPEB 110/30 Pressing force: 1100 kN Working length: 3050 mm Distance between uprights: 2600 mm Stroke: 200 mm Table/ram gap: 400 mm Throat depth: 400 mm Gbjdjw Afccspfx Afpeu Approach speed: 130 mm/s Working speed: 12.4 mm/s Return speed: 115 mm/s Motor: 15 kW Oil capacity: 250 liters Machine weight: 9500 kg CNC control: CADMAN Table width: 150 mm Noise level: 80 dBA Pump flow rate: 38 l/min Pump type: Voith IPV 4-25 High precision and flexibility. The PPEB press brake is a robust, highly technological machine. PPEB gives you the freedom to configure your press brake according to your production requirements. Automatic crowning The crowning system compensates for machine deflection to ensure accurate and repeatable bends. Our wedge system is custom-made for every machine, representing crowning across the entire table length. Robust structure A single-piece welded frame ensures machine accuracy.