Wolff Steuerungstechnik GmbH

Condition: excellent (used), functionality: fully functional, Electronic control of X-axis X-axis positioning speed (m/min) 25 Pneumatic tilting heads External tilt 45° Mechanical adjustment of intermediate angles Hydro-pneumatic blade feed Rodoyn Adyopfx Afcsp Usable cutting length (mm) 4,000 Minimum standard cut with 2 heads at 90° (mm) 310 Blade diameter (mm) 500 Feelers / copy sensor

Year of construction: 2009, condition: used, Schüco PAS compact Rodpfx Afeyni Skscep

Condition: used, Year of construction: 2009, Technical data: Schuco PDG DUAL CUT 283 720 Rsdjyniyhepfx Afcjp Weight 5500 kg • Carbide saw blades Ø 600 mm • Three-phase motors: 3.7 kW-2880 rpm-230/400V-50 Hz • Saw blade speed 2410 rpm • Saw blade shaft diameter 40 mm • Saw blade tilt with electronic control: from 90° to 45° inside • Head rotation with electronic control: from 50° outside to 22.5° inside • 1st head = fixed head • Second head movable with automatic positioning • Positioning speed (automatic) of the movable head: 25 m/min • Positioning accuracy of the movable head: +/-0.1 mm • Smallest cutting length between the two heads at 90° is 405mm • Largest cutting length between the two heads (at 90°): 6000 mm • Double operating pressure • Max. air consumption per work cycle: 82.3 NI (normal liters) • Hydropneumatic feed of the carbide saw blades (adjustable feed speed-quick retraction) • 4 vertical pneumatic clamping devices • Micro-drop lubrication of the cut with pure oil • Preparation for chip and smoke extraction 1 • Operating pressure: 7 bar (adjustable)

Year of construction: 1994, condition: used, Max. saw blade diameter: 550 mm Manual swiveling with digital display Motor-driven axis for tilting the saw blade with digital display and speed setting via potentiometer Rodsynacyspfx Afcep Stepless saw blade feed Minimum quantity spray device Weight: approx. 1,000 kg

Condition: used, functionality: limited functionality, Emmegi 650 SCA/E crosscut saw for aluminium. Equipped with a 650mm saw blade. Rsdpfx Afoymg Dnjcep The machine can perform straight cuts and mitre cuts vertically from 0 to 60 degrees. Note: The horizontal mitre function is defective. dimensions Please note: The information on this page has been obtained and assembled in good faith, but accuracy cannot be guaranteed. Accordingly, this does not constitute a representation or contract and we advise you to verify all relevant details. Transport dimensions: length 140cm width 160cm height 180cm weight approx. 1500kg Financial information VAT/margin: VAT: The shown price is excluding VAT (VAT deductible for businesses)

Condition: used, Year of construction: 1992, functionality: limited functionality, input voltage: 380 V, rotational speed (max.): 2,820 rpm, air pressure: 7 bar, rotational speed (min.): 2,820 rpm, compressed air connection: 7 bar, overall weight: 1,000 kg, saw drive: 4,600 W, We offer this used Emmegi LINEA V18 TU/4 Double miter saw, year of construction 1992. Rjdpsyk D Rtsfx Afcjp Machine is in running condition and has been used recently. The computer on the saw isn't reliable. We offer help with loading for transport. If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2016, condition: used, functionality: fully functional, For sale: KABAN double-head saw, model AC 1050. The machine is fully operational. Redpfjyiz N Rex Afcop

Year of construction: 2009, condition: used, functionality: fully functional, machine/vehicle number: 13/12/09, For sale: PREZMET DCX 550M double-head saw after refurbishment. The saw is equipped with WH NET control. The heads are automatically adjustable. The saw has been overhauled and is fully operational. New saw blades. Rodpsyiz Iyofx Afcjp

Year of construction: 1998, condition: used, Max. sawing length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 500 control Rjdpfx Aoyic Tzofcsp Swivel inside and outside 22.5° - 90° - 140° Tilt angles between 45 and 90 degrees Digital angle displays Moving roller conveyor Minimum quantity spray device Pneumatic folding support arms

Condition: new, Year of construction: 2026, functionality: fully functional, saw blade diameter: 520 mm, CNC-controlled double-head mitre circular saw with electronic saw head tilting A high-performance circular saw designed for precise and efficient cutting of profiles made from aluminium, non-ferrous metals, and various plastics. The machine can be used for individual cuts—sawing the profile simultaneously with two saw heads—or in automatic mode, where the double-head saw operates as a single-head saw automation system. Electronic mitre adjustment of the saw heads. Mitre angles are infinitely programmable between 20° and 135°. Saw blade drive power: 2 x 2.2 kW Saw blade diameter: Ø 520 mm Maximum cut length with both saw heads operating simultaneously: 4,000 mm or 5,000 mm Maximum / minimum cut length in automatic mode: unlimited (the profile is pushed and pulled) Roller conveyor travel length: 2,300 mm Maximum space requirement: approx. 7.2/8.2 m (saw unit fully to the right) x 1.25 m x H 1.6 m Weight: approx. 1,500 kg / 1,700 kg - CNC control with a touchscreen and color graphics on a mobile operator’s panel - Import and export of CSV / LTE files (for loading cutting lists from external design software) - Graphical profile display Redeyhzifopfx Afcsp Optionally equipped with a label printer.

Year of construction: 1997, condition: used, functionality: unexamined, Emmegi Classic Single TU/4 double head saw with infeed and outfeed roller conveyors, s/n 242937 (1997) This lot is located in Farnworth, Bolton. Redpfx Afjyg Rfvjcjp Collection must be made on Tuesday 3rd March 2026.

Year of construction: 2007, condition: used, functionality: unexamined, Elumatec MGS 105/01 single head mitre saw with cut to length system, E111 digital display, E555 control, infeed and outfeed roller conveyors, s/n 1050126588 (advised 2007) This lot is located in Farnworth, Bolton. Rjdpfxoyg Rfco Afcsp Collection must be made on Tuesday 3rd March 2026.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Usable cutting length 5000 mm Rsdpeyg Epvsfx Afcjp Blade diameter 550 mm Electronic head tilting Internal/external inclination from 22°30′ to 135 ° Measuring probe

Year of construction: 2016, condition: excellent (used), functionality: fully functional, X-axis positioning speed HS version: 50 m/min Electronic control of intermediate angles Max. internal inclination: 45° Max. external inclination: 15° Electronic CNC feed axis for the saw blade Usable cutting length, depending on model: 5 m Saw blade diameter: 550 mm Conveyor belt for step-by-step or automatic cutting Windows XPE operating system 10.4” color graphic TFT display – 800x600 (SVGA) Rjdpfxsygr H Is Afcop Touch screen functionality

Condition: good (used), Double Mitre Saw DG79 - 2 x 2 kW - 380 Volt Rjdpfx Ajygm Akjfcsp - Year of manufacture: 1988 - 2100 / 3800 rpm - Saw blade Ø 330 mm - Cutting range at 90°: 195 x 90 mm; at 45°: 135 x 90 mm - Minimum cutting length 500 mm, maximum approx. 3300 mm - Compressed air 6-8 bar / 250 l/min - Weight: approx. 500 kg - Pneumatic clamping system

Year of construction: 2001, condition: used, Saw blade diameter vertical: 600 mm Saw blade diameter (horizontal): 500 mm Ejecting width: processing of profiles up to 300 mm at 90°, mitre tips up to 30° Profile height max. 280 mm Engagement depth: at 90° horizontal up to 185 mm / at 90° vertical up to 230 mm Material stop: swiveling 30° - 90° - 45° Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication Rjdpfxjygkn De Afcjp

Year of construction: 2001, condition: used, Max. saw blade diameter: 350 mm Rsdpfoygin Nox Afcop Pneumatic material clamps Table rotateable left and right Manual feed

Year of construction: 2019, operating hours: 4,225 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: G122782, Fully functional EMMEGI saw ready for collection, well-maintained with low operating hours, like new. Rodpjygh Axsfx Afcjp

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, FOM double-head saw for aluminum, plastic, and wood Rsdpfoycv Nxox Afcjp - one head electic drive - saw diameter 400mm - total length 4800mm - maximum saw approximately 4000mm The machine worked until the end. After unplugging, it was tested and working. It may require minor repairs (air leaks). You can inspect it on-site at our company in Poland. We can send a video of the machine in operation. We can assist with transport.

Year of construction: 2001, condition: like new (used), functionality: fully functional, machine/vehicle number: 694-6367, For sale is a SCHÜCO KSM 235 clipping machine, year 2001, article no. 296757, S/N 694-6367, 230 V, approx. 150 kg, roller conveyor approx. 200 cm. The machine can be inspected at our company premises and, if desired, also tested. Rjdjycqq Djpfx Afcjp

Condition: good (used), saw blade diameter: 360 mm, Sliding saw / Mitre saw / Chop saw / Radial saw Rsdpsyckbijfx Afcep Wegoma zs 135 Mitre saw type ZS135 -Motor power: 2.2 kW -Saw blade: Ø 360 mm, swiveling

Year of construction: 2014, condition: used, functionality: fully functional, Mobile chip extractor MG4, sound-insulated and equipped with automatic start. Features an antistatic filter, suitable for extracting aluminum, PVC, and steel chips. Automatic filter cleaning and easy chip container emptying thanks to castors. The VP version is fitted with a control unit featuring a potential-free contact for external activation by the connected machine. Redpfx Afjycgtbocsp The front extraction system comprises two cast aluminium suction ports, each with a 100 mm diameter. These allow for multiple connections via plastic hoses with metal reinforcement to dust extraction devices mounted on cutting machines, sawing centers, machining centers, and PVC machinery. Accessories include adapters reducing to 70 mm, a Y-connector, and approximately 14 meters of extraction hose. (Perfectly set up for use with an Emmegi double mitre saw)

Year of construction: 2020, condition: as good as new (ex-display), functionality: fully functional, ZAX12372 Single-head saw with pneumatic tilting of heads • Head tilting up to 22.5° right/left (Automatic positioning at fixed angles of 22.5° - 45° - 90°) • Head tilting at intermediate degrees, with manual positioning (mechanical stop) • Full enclosure • Three-phase motor 400V 50Hz 4kW (inverter-driven) • Saw blade rotation speed 1900 rpm • Chip and fume extraction connection • Simultaneous activation of the extraction unit with saw blade start • Lubrication of the cut by misting system • Widia saw blade Ø 700 mm • 2 pneumatic horizontal clamps Rodpfx Afjya H Dzjcsp • 2 pneumatic vertical clamps • Set of service tools

Condition: excellent (used), functionality: fully functional, Pantograph with 2 controlled axes, ideal for machining aluminum, PVC, and steel profiles up to 2 mm, with the option to process stainless steel (optional). The work cycle is managed through intuitive software that guides the operator with simple instructions on the touchscreen display. The USB connection allows for easy linking to a PC. The four-sided rotating worktable ensures very high precision by using shorter tools, thus avoiding through machining and the resulting issues of vibration and noise. It is equipped with a quick tool change system with ISO 30 taper. A retractable, pneumatically operated guard protects the operator during machining. Redpfx Aox U Dg Dsfcsp

Year of construction: 2022, condition: like new (used), functionality: fully functional, For sale: Emmegi Five 300CS glazing and inspection press, ideal for precise glazing and final inspection of window and frame elements. The machine features a self-centering clamping system and robust, scratch-resistant contact surfaces. Reliable technology, user-friendly operation, and compact design. Technical specifications: - Contact surfaces coated with hard, scratch-resistant PVC - Adjustable working surface height: 875–925 mm - Working surface tilt: 0° (horizontal) to 85° Rjdpfx Aex U Daqsfcep - Adjustable clamping force (max.): 660 N - Clamping device opening: 425–2,425 mm - Clamping jaw height (max.): 65 mm - Clamping device with 2 beams, each with 5 adjustable jaws - Beam height: H = 2,060 mm - Self-centering clamping system with retractable clamping beams - Pneumatic tilting of the roller conveyor in horizontal position - Infeed/outfeed roller conveyor, floor height adjustable: 305–355 mm - Machine length: 3,000 mm - Air consumption: 150 Nl/cycle - Maximum load capacity: 200 kg - Machine weight: 330 kg